From: Liam Girdwood <lrg@kernel.org>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Samuel Ortiz <sameo@openedhand.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/13] WM8350 support
Date: Fri, 10 Oct 2008 15:24:24 +0100 [thread overview]
Message-ID: <1223648664.6814.323.camel@dell-desktop.example.com> (raw)
In-Reply-To: <20081006123254.GA9664@rakim.wolfsonmicro.main>
On Mon, 2008-10-06 at 13:32 +0100, Mark Brown wrote:
> These patches against the regulator tree add initial support for the
> WM8350, a multi-function device with several subsystems targetted at
> embedded systems. This series adds a core driver providing device acess
> under drivers/mfd and support for the PMIC functionality of the device
> via the regulator API. Due to their use in the core some definitions
> for other parts of the device are also included - drivers for these will
> follow.
>
> All the WM8350 drivers submitted here were originally written by Liam
> Girdwood with some updates from me for submission to mainline.
>
> Samuel, as with the WM8400 are you OK with merging this via the
> regulator tree?
Samuel, are fine to Ack the MFD parts ?
Liam
next prev parent reply other threads:[~2008-10-10 14:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-06 12:32 [PATCH 0/13] WM8350 support Mark Brown
2008-10-06 12:37 ` [PATCH 01/13] mfd: Add WM8350 audio register definitions Mark Brown
2008-10-06 12:37 ` [PATCH 02/13] mfd: Add WM8350 GPIO " Mark Brown
2008-10-06 12:37 ` [PATCH 03/13] mfd: Add WM8350 PMIC " Mark Brown
2008-10-06 12:37 ` [PATCH 04/13] mfd: Add WM8350 PMU " Mark Brown
2008-10-06 12:38 ` [PATCH 05/13] mfd: Add WM8350 comparator " Mark Brown
2008-10-06 12:38 ` [PATCH 06/13] mfd: Add WM8350 RTC " Mark Brown
2008-10-06 12:38 ` [PATCH 07/13] mfd: Add WM8350 watchdog " Mark Brown
2008-10-06 12:38 ` [PATCH 08/13] mfd: Core support for the WM8350 AudioPlus PMIC Mark Brown
2008-10-06 12:38 ` [PATCH 09/13] mfd: Add I2C control support for WM8350 Mark Brown
2008-10-06 12:38 ` [PATCH 10/13] mfd: Add GPIO pin configuration " Mark Brown
2008-10-06 12:38 ` [PATCH 11/13] mfd: Add initialisation callback " Mark Brown
2008-10-06 12:38 ` [PATCH 12/13] mfd: Add WM8350 interrupt support Mark Brown
2008-10-06 12:38 ` [PATCH 13/13] regulator: Add WM8350 regulator support Mark Brown
2008-10-09 12:05 ` [PATCH 08/13] mfd: Core support for the WM8350 AudioPlus PMIC Liam Girdwood
2008-10-09 12:53 ` Mark Brown
2008-10-10 14:24 ` Liam Girdwood [this message]
2008-10-10 14:31 ` [PATCH 0/13] WM8350 support Samuel Ortiz
2008-10-10 14:38 ` Mark Brown
2008-10-10 14:45 ` Liam Girdwood
2008-10-10 14:58 ` [PATCH 01/14] mfd: Add WM8350 audio register definitions Mark Brown
2008-10-10 14:58 ` [PATCH 02/14] mfd: Add WM8350 GPIO " Mark Brown
2008-10-10 14:58 ` [PATCH 03/14] mfd: Add WM8350 PMIC " Mark Brown
2008-10-10 14:58 ` [PATCH 04/14] mfd: Add WM8350 PMU " Mark Brown
2008-10-10 14:58 ` [PATCH 05/14] mfd: Add WM8350 comparator " Mark Brown
2008-10-10 14:58 ` [PATCH 06/14] mfd: Add WM8350 RTC " Mark Brown
2008-10-10 14:58 ` [PATCH 07/14] mfd: Add WM8350 watchdog " Mark Brown
2008-10-10 14:58 ` [PATCH 08/14] mfd: Core support for the WM8350 AudioPlus PMIC Mark Brown
2008-10-10 14:58 ` [PATCH 09/14] mfd: Add I2C control support for WM8350 Mark Brown
2008-10-10 14:58 ` [PATCH 10/14] mfd: Add GPIO pin configuration " Mark Brown
2008-10-10 14:58 ` [PATCH 11/14] mfd: Add initialisation callback " Mark Brown
2008-10-10 14:58 ` [PATCH 12/14] mfd: Add WM8350 interrupt support Mark Brown
2008-10-10 14:58 ` [PATCH 13/14] regulator: Add WM8350 regulator support Mark Brown
2008-10-10 14:58 ` [PATCH 14/14] mfd: Add WM8350 subdevice registration helper Mark Brown
2008-10-11 14:18 ` Samuel Ortiz
2008-10-11 15:38 ` Mark Brown
2008-10-11 14:09 ` [PATCH 10/14] mfd: Add GPIO pin configuration support for WM8350 Samuel Ortiz
2008-10-11 14:46 ` Mark Brown
2008-10-11 14:23 ` [PATCH 0/13] WM8350 support Samuel Ortiz
2008-10-10 14:48 ` Samuel Ortiz
2008-10-10 14:38 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1223648664.6814.323.camel@dell-desktop.example.com \
--to=lrg@kernel.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@openedhand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).