On 8/19/21 11:44 PM, Takashi Iwai wrote:
> On Fri, 20 Aug 2021 07:08:34 +0200,
> Randy Dunlap wrote:
>>
>> Hi,
>>
>> I am having problems getting audio working on my computer:
>>
>> 00:1f.3 Audio device: Intel Corporation Device f1c8
>>
>> I did an internet search that said that I would need 5.13 or later to
>> have support for this device.
> 
> The above is Cometlake-H, and it pretty much depends on the machine
> configuration.
> 
>> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>>
>> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>> snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>> snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>> snd_hda_codec_realtek hdaudioC0D0:    inputs:
>> snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
>> snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
>>
>> but produces no sound output.
> 
> FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
> backports, hence its HD-audio part is almost equivalent with 5.13 or
> later kernel (except for the recently changed mute-LED handling --
> which must be irrelevant with your problem).
> 
> The above indicates that the codec is detected and set up.  The rest
> part is often some vendor-specific quirks.  For that, details are
> missing completely.  At best please give alsa-info.sh output (run the
> script with --no-upload and attach the output).
> 

Oh, of course. Now attached.

> 
>> Kernel 5.13.10 or 5.14-rc6 say:
>>
>> calling  azx_driver_init+0x0/0x20 @ 1
>> snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
>> snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
>> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
>> snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000
>> snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...
>> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
>> hdaudio hdaudioC0D0: no AFG or MFG node found
>> snd_hda_intel 0000:00:1f.3: no codecs initialized
> 
> If it's the result from the more-or-less similar configuration like
> the previous Leap kernel (regarding the audio), this must come from
> another part than the sound driver, likely either PCI or arch/x86.
> You might need to bisect for that...


Thanks much.

-- 
~Randy