linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin McNeely <kev@cypress.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Brown <davidb@codeaurora.org>,
	Trilok Soni <tsoni@codeaurora.org>,
	Kevin McNeely <kev@cypress.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Eric Miao <eric.y.miao@gmail.com>,
	Mike Frysinger <vapier@gentoo.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Alan Cox <alan@linux.intel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [v3 2/3] 2/3 i2c: Cypress TTSP G3 MTDEV I2C Device Driver
Date: Wed, 29 Dec 2010 11:17:46 -0800	[thread overview]
Message-ID: <1293650268-1561-2-git-send-email-kev@cypress.com> (raw)
In-Reply-To: <Kevin McNeely <kev@cypress.com>

Cypress TTSP Gen3 I2C Device Driver.
Provides i2c communications modules for the
Cypress TTSP Gen3 MTDEV Core Driver.

Signed-off-by: Kevin McNeely <kev@cypress.com>
---
Changes since v2:
- Fixed first line of multi-line comments to follow style guide

 drivers/input/touchscreen/Kconfig      |   12 ++
 drivers/input/touchscreen/Makefile     |    1 +
 drivers/input/touchscreen/cyttsp_i2c.c |  183 ++++++++++++++++++++++++++++++++
 3 files changed, 196 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/touchscreen/cyttsp_i2c.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 7d886bc..e1a37f5 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -129,6 +129,18 @@ config TOUCHSCREEN_CYTTSP_CORE
 	help
 	  Always activated for Cypress TTSP touchscreen
 
+config TOUCHSCREEN_CYTTSP_I2C
+	tristate "Cypress TTSP i2c touchscreen"
+	depends on I2C && TOUCHSCREEN_CYTTSP_CORE
+	help
+	  Say Y here if you have a Cypress TTSP touchscreen
+	  connected to your system with an I2C interface.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp-i2c.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index b6f1ba8..88ee091 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)       += bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)   += cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)    += cyttsp_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c
new file mode 100644
index 0000000..a83efd3
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c.c
@@ -0,0 +1,183 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#define CY_I2C_DATA_SIZE  128
+
+struct cyttsp_i2c {
+	struct cyttsp_bus_ops ops;
+	struct i2c_client *client;
+	void *ttsp_client;
+	u8 wr_buf[CY_I2C_DATA_SIZE];
+};
+
+static s32 ttsp_i2c_read_block_data(void *handle, u8 addr,
+	u8 length, void *values)
+{
+	struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+	int retval = 0;
+
+	retval = i2c_master_send(ts->client, &addr, 1);
+	if (retval < 0)
+		return retval;
+
+	retval = i2c_master_recv(ts->client, values, length);
+
+	return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_write_block_data(void *handle, u8 addr,
+	u8 length, const void *values)
+{
+	struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+	int retval;
+
+	ts->wr_buf[0] = addr;
+	memcpy(&ts->wr_buf[1], values, length);
+
+	retval = i2c_master_send(ts->client, ts->wr_buf, length+1);
+
+	return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_tch_ext(void *handle, void *values)
+{
+	struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+	int retval = 0;
+
+	/*
+	 * TODO: Add custom touch extension handling code here
+	 * set: retval < 0 for any returned system errors,
+	 *	retval = 0 if normal touch handling is required,
+	 *	retval > 0 if normal touch handling is *not* required
+	 */
+	if (!ts || !values)
+		retval = -EIO;
+
+	return retval;
+}
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct cyttsp_i2c *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EIO;
+
+	/* allocate and clear memory */
+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+	if (!ts) {
+		dev_dbg(&client->dev, "%s: Error, kzalloc.\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* register driver_data */
+	ts->client = client;
+	i2c_set_clientdata(client, ts);
+	ts->ops.write = ttsp_i2c_write_block_data;
+	ts->ops.read = ttsp_i2c_read_block_data;
+	ts->ops.ext = ttsp_i2c_tch_ext;
+	ts->ops.dev = &client->dev;
+	ts->ops.dev->bus = &i2c_bus_type;
+
+	ts->ttsp_client = cyttsp_core_init(&ts->ops, &client->dev);
+	if (IS_ERR(ts->ttsp_client)) {
+		int retval = PTR_ERR(ts->ttsp_client);
+		kfree(ts);
+		return retval;
+	}
+
+	dev_dbg(ts->ops.dev, "%s: Registration complete\n", __func__);
+
+	return 0;
+}
+
+
+/* registered in driver struct */
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp_i2c *ts;
+
+	ts = i2c_get_clientdata(client);
+	cyttsp_core_release(ts->ttsp_client);
+	kfree(ts);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cyttsp_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	return cyttsp_suspend(dev_get_drvdata(&client->dev));
+}
+
+static int cyttsp_i2c_resume(struct i2c_client *client)
+{
+	return cyttsp_resume(dev_get_drvdata(&client->dev));
+}
+#endif
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+	{ CY_I2C_NAME, 0 },  { }
+};
+
+static struct i2c_driver cyttsp_i2c_driver = {
+	.driver = {
+		.name = CY_I2C_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = cyttsp_i2c_probe,
+	.remove = __devexit_p(cyttsp_i2c_remove),
+	.id_table = cyttsp_i2c_id,
+#ifdef CONFIG_PM
+	.suspend = cyttsp_i2c_suspend,
+	.resume = cyttsp_i2c_resume,
+#endif
+};
+
+static int __init cyttsp_i2c_init(void)
+{
+	return i2c_add_driver(&cyttsp_i2c_driver);
+}
+
+static void __exit cyttsp_i2c_exit(void)
+{
+	return i2c_del_driver(&cyttsp_i2c_driver);
+}
+
+module_init(cyttsp_i2c_init);
+module_exit(cyttsp_i2c_exit);
+
+MODULE_ALIAS("i2c:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
-- 
1.7.2.1


---------------------------------------------------------------
This message and any attachments may contain Cypress (or its
subsidiaries) confidential information. If it has been received
in error, please advise the sender and immediately delete this
message.
---------------------------------------------------------------


  parent reply	other threads:[~2010-12-29 19:18 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Kevin McNeely <kev@cypress.com>
2010-07-12 20:56 ` [PATCH] i2c: cyttsp i2c touchscreen driver init submit Kevin McNeely
2010-07-13  2:34   ` Christoph Fritz
2010-08-04 16:30     ` Kevin McNeely
2010-07-13  6:48   ` Henrik Rydberg
2010-08-04 16:38     ` Kevin McNeely
2010-07-13  7:31   ` Trilok Soni
2010-07-13  7:55     ` Dmitry Torokhov
2010-07-13  8:42       ` Trilok Soni
2010-07-22 10:33         ` Trilok Soni
2010-07-27 15:20           ` Kevin McNeely
2010-08-04 17:27       ` Kevin McNeely
2010-07-19  9:28     ` Jean Delvare
2010-08-04 17:22     ` Kevin McNeely
2010-08-05 18:12 ` [PATCH] i2c: cyttsp i2c and spi " Kevin McNeely
2010-08-05 20:45   ` Trilok Soni
2010-08-05 21:07     ` Dmitry Torokhov
2010-08-07  0:39       ` Kevin McNeely
2010-08-07  0:52     ` Kevin McNeely
2010-08-05 23:06   ` Henrik Rydberg
2010-08-07  0:32     ` Kevin McNeely
2010-08-07  0:49       ` Henrik Rydberg
2010-08-10  0:51         ` Kevin McNeely
2010-08-06  9:06   ` Trilok Soni
2010-08-10  0:49     ` Kevin McNeely
2010-11-09 18:25 ` [PATCH] touchscreen: Cypress TTSP G3 MTDEV Core Driver Kevin McNeely
2010-11-15 16:46   ` Henrik Rydberg
2010-11-19 17:39     ` Kevin McNeely
2010-12-01  7:22       ` Trilok Soni
2010-12-01 14:38         ` Henrik Rydberg
2010-12-01 23:59           ` Kevin McNeely
2010-12-02  0:01             ` Henrik Rydberg
2010-12-02  0:34   ` Dmitry Torokhov
2010-11-09 18:25 ` [PATCH] i2c: Cypress TTSP G3 MTDEV I2C Device Driver Kevin McNeely
2010-11-09 18:25 ` [PATCH] spi: Cypress TTSP G3 MTDEV SPI " Kevin McNeely
2010-12-04  2:06 ` [v2] touchscreen Cypress TTSP G3 MTDEV Core Driver Kevin McNeely
2010-12-05  9:11   ` Henrik Rydberg
2010-12-04  2:06 ` [v2] 2/3 i2c: Cypress TTSP G3 MTDEV I2C Device Driver Kevin McNeely
2010-12-04  2:06 ` [v2] 3/3 spi: Cypress TTSP G3 MTDEV SPI " Kevin McNeely
2010-12-29 19:17 ` [v3 1/3] 1/3 Touchscreen: Cypress TTSP G3 MTDEV Core Driver Kevin McNeely
2010-12-30  6:04   ` Shubhrajyoti Datta
2011-01-05  0:45     ` Kevin McNeely
2010-12-31 11:53   ` Henrik Rydberg
2010-12-31 12:55     ` Trilok Soni
2010-12-31 13:58       ` Henrik Rydberg
2011-01-03  9:44         ` Trilok Soni
2011-01-03 17:03     ` Kevin McNeely
2011-01-03 18:45       ` Henrik Rydberg
2011-01-03 20:50         ` Kevin McNeely
2011-01-04  1:50   ` Hong Liu
2011-01-05  0:38     ` Kevin McNeely
2010-12-29 19:17 ` Kevin McNeely [this message]
2011-01-04  1:45   ` [v3 2/3] 2/3 i2c: Cypress TTSP G3 MTDEV I2C Device Driver Hong Liu
2011-01-05  0:37     ` Kevin McNeely
2010-12-29 19:17 ` [v3 3/3] 3/3 spi: Cypress TTSP G3 MTDEV SPI " Kevin McNeely
2011-01-05  0:54 ` [v4 1/3] 1/3 Touchscreen: Cypress TTSP G3 Core Driver Kevin McNeely
2011-01-05  8:59   ` Henrik Rydberg
2011-01-05 17:07     ` Kevin McNeely
2011-01-05 17:34       ` Henrik Rydberg
2011-01-10 19:27         ` Kevin McNeely
2011-01-10 21:11           ` Dmitry Torokhov
2011-01-10 21:17             ` Kevin McNeely
2011-02-24 18:31         ` Kevin McNeely
2011-02-27 12:34           ` Henrik Rydberg
2011-01-05  0:54 ` [v4 2/3] 2/3 i2c: Cypress TTSP G3 I2C Device Driver Kevin McNeely
2011-01-05  0:54 ` [v4 3/3] 3/3 spi: Cypress TTSP G3 SPI " Kevin McNeely
2011-01-12 18:45   ` Dmitry Torokhov
2011-01-12 19:02     ` Kevin McNeely
2011-01-20 11:10       ` Trilok Soni
2011-01-21  9:27         ` Dmitry Torokhov
2011-01-21 22:14           ` Kevin McNeely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1293650268-1561-2-git-send-email-kev@cypress.com \
    --to=kev@cypress.com \
    --cc=alan@linux.intel.com \
    --cc=davidb@codeaurora.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=eric.y.miao@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rydberg@euromail.se \
    --cc=sameo@linux.intel.com \
    --cc=tsoni@codeaurora.org \
    --cc=vapier@gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).