linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: mingo@redhat.com, hpa@zytor.com, tglx@linutronix.de,
	rientjes@google.com, yinghai@kernel.org,
	linux-kernel@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 09/14] x86-32, NUMA: Move lowmem address space reservation to init_alloc_remap()
Date: Tue,  5 Apr 2011 00:23:55 +0200	[thread overview]
Message-ID: <1301955840-7246-10-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1301955840-7246-1-git-send-email-tj@kernel.org>

Remap alloc init is done in the following stages.

1. init_alloc_remap() calculates how much memory is necessary for each
   node and reserves node local memory.

2. initmem_init() collects how much each node needs and reserves a
   single contiguous lowmem area which can contain all.

3. init_remap_allocator() initializes allocator parameters from the
   determined lowmem address and per-node offsets.

4. Actual remap happens.

There is no reason for the lowmem remap area to be reserved as a
single contiguous area at one go.  They don't interact with each other
and the memblock allocator will put them side-by-side anyway.

This patch breaks up the single lowmem address reservation and put
per-node lowmem address reservation into init_alloc_remap() and
initializes allocator parameters directly in the function as all the
addresses are determined there.  This merges steps 2 and 3 into 1.

While at it, remove now largely irrelevant comments in
init_alloc_remap().

This change causes the following behavior changes.

* Remap lowmem areas are allocated in smaller per-node chunks.

* Remap lowmem area reservation failure fail future remap allocations
  instead of panicking.

* Remap allocator initialization is less verbose.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
 arch/x86/mm/numa_32.c |   82 +++++++++++++++----------------------------------
 1 files changed, 25 insertions(+), 57 deletions(-)

diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index c127543..12bb34c 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -108,9 +108,6 @@ static unsigned long node_remap_size[MAX_NUMNODES];
 static void *node_remap_start_vaddr[MAX_NUMNODES];
 void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
-static unsigned long kva_start_pfn;
-static unsigned long kva_pages;
-
 int __cpuinit numa_cpu_node(int cpu)
 {
 	return apic->x86_32_numa_cpu_node(cpu);
@@ -266,7 +263,8 @@ void resume_map_numa_kva(pgd_t *pgd_base)
 static __init unsigned long init_alloc_remap(int nid, unsigned long offset)
 {
 	unsigned long size;
-	u64 node_pa;
+	u64 node_pa, remap_pa;
+	void *remap_va;
 
 	/*
 	 * The acpi/srat node info can show hot-add memroy zones where
@@ -287,6 +285,7 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset)
 	size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
 	size = ALIGN(size, LARGE_PAGE_BYTES);
 
+	/* allocate node memory and the lowmem remap area */
 	node_pa = memblock_find_in_range(node_start_pfn[nid] << PAGE_SHIFT,
 					 (u64)node_end_pfn[nid] << PAGE_SHIFT,
 					 size, LARGE_PAGE_BYTES);
@@ -295,45 +294,35 @@ static __init unsigned long init_alloc_remap(int nid, unsigned long offset)
 			   size, nid);
 		return 0;
 	}
+	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+
+	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
+					  max_low_pfn << PAGE_SHIFT,
+					  size, LARGE_PAGE_BYTES);
+	if (remap_pa == MEMBLOCK_ERROR) {
+		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
+			   size, nid);
+		memblock_x86_free_range(node_pa, node_pa + size);
+		return 0;
+	}
+	memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+	remap_va = phys_to_virt(remap_pa);
 
+	/* initialize remap allocator parameters */
+	node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
 	node_remap_size[nid] = size >> PAGE_SHIFT;
 	node_remap_offset[nid] = offset;
-	printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of node %d at %llx\n",
-	       size >> PAGE_SHIFT, nid, node_pa >> PAGE_SHIFT);
 
-	/*
-	 *  prevent kva address below max_low_pfn want it on system
-	 *  with less memory later.
-	 *  layout will be: KVA address , KVA RAM
-	 *
-	 *  we are supposed to only record the one less then
-	 *  max_low_pfn but we could have some hole in high memory,
-	 *  and it will only check page_is_ram(pfn) &&
-	 *  !page_is_reserved_early(pfn) to decide to use it as free.
-	 *  So memblock_x86_reserve_range here, hope we don't run out
-	 *  of that array
-	 */
-	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+	node_remap_start_vaddr[nid] = remap_va;
+	node_remap_end_vaddr[nid] = remap_va + size;
+	node_remap_alloc_vaddr[nid] = remap_va + ALIGN(sizeof(pg_data_t), PAGE_SIZE);
 
-	node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
+	printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
+	       nid, node_pa, node_pa + size, remap_va, remap_va + size);
 
 	return size >> PAGE_SHIFT;
 }
 
-static void init_remap_allocator(int nid)
-{
-	node_remap_start_vaddr[nid] = pfn_to_kaddr(
-			kva_start_pfn + node_remap_offset[nid]);
-	node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
-		(node_remap_size[nid] * PAGE_SIZE);
-	node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
-		ALIGN(sizeof(pg_data_t), PAGE_SIZE);
-
-	printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
-		(ulong) node_remap_start_vaddr[nid],
-		(ulong) node_remap_end_vaddr[nid]);
-}
-
 void __init initmem_init(void)
 {
 	unsigned long reserve_pages = 0;
@@ -352,25 +341,7 @@ void __init initmem_init(void)
 
 	for_each_online_node(nid)
 		reserve_pages += init_alloc_remap(nid, reserve_pages);
-	kva_pages = roundup(reserve_pages, PTRS_PER_PTE);
-	printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
-			reserve_pages);
-
-	kva_start_pfn = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
-				max_low_pfn << PAGE_SHIFT,
-				kva_pages << PAGE_SHIFT,
-				PTRS_PER_PTE << PAGE_SHIFT) >> PAGE_SHIFT;
-	if (kva_start_pfn == MEMBLOCK_ERROR)
-		panic("Can not get kva space\n");
-
-	printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
-		kva_start_pfn, max_low_pfn);
-	printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
-
-	/* avoid clash with initrd */
-	memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT,
-		      (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
-		     "KVA PG");
+
 #ifdef CONFIG_HIGHMEM
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
@@ -390,11 +361,8 @@ void __init initmem_init(void)
 
 	printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(max_low_pfn));
-	for_each_online_node(nid) {
-		init_remap_allocator(nid);
-
+	for_each_online_node(nid)
 		allocate_pgdat(nid);
-	}
 	remap_numa_kva();
 
 	printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
-- 
1.7.1


  parent reply	other threads:[~2011-04-04 22:24 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-04 22:23 [PATCHSET tip:x86/mm] x86-32, NUMA: Clean up alloc_remap Tejun Heo
2011-04-04 22:23 ` [PATCH 01/14] x86-32, NUMA: Fix failure condition check in alloc_remap() Tejun Heo
2011-04-05 17:20   ` Yinghai Lu
2011-04-07  2:03   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 02/14] x86-32, NUMA: Align pgdat size while initializing alloc_remap Tejun Heo
2011-04-05 17:28   ` Yinghai Lu
2011-04-07  2:04   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 03/14] x86-32, NUMA: Remove redundant top-down alloc code from remap initialization Tejun Heo
2011-04-05 17:37   ` Yinghai Lu
2011-04-07  2:04   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 04/14] x86-32, NUMA: Reorganize calculate_numa_remap_page() Tejun Heo
2011-04-05 17:42   ` Yinghai Lu
2011-04-07  2:05   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 05/14] x86-32, NUMA: Rename @node_kva to @node_pa in init_alloc_remap() Tejun Heo
2011-04-05 17:44   ` Yinghai Lu
2011-04-07  2:05   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 06/14] x86-32, NUMA: Make @size in init_aloc_remap() represent bytes Tejun Heo
2011-04-05 17:54   ` Yinghai Lu
2011-04-07  2:05   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 07/14] x86-32, NUMA: Calculate remap size in common code Tejun Heo
2011-04-05 18:04   ` Yinghai Lu
2011-04-07  2:06   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 08/14] x86-32, NUMA: Make init_alloc_remap() less panicky Tejun Heo
2011-04-07  2:06   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` Tejun Heo [this message]
2011-04-05 18:41   ` [PATCH 09/14] x86-32, NUMA: Move lowmem address space reservation to init_alloc_remap() Yinghai Lu
2011-04-07  2:07   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 10/14] x86-32, NUMA: Move remapping for remap allocator into init_alloc_remap() Tejun Heo
2011-04-05 18:59   ` Yinghai Lu
2011-04-07  2:07   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 11/14] x86-32, NUMA: Make pgdat allocation use alloc_remap() Tejun Heo
2011-04-05 19:14   ` Yinghai Lu
2011-04-07  2:08   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 12/14] x86-32, NUMA: Remove now useless node_remap_offset[] Tejun Heo
2011-04-05 19:15   ` Yinghai Lu
2011-04-07  2:08   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:23 ` [PATCH 13/14] x86-32, NUMA: Remove redundant node_remap_size[] Tejun Heo
2011-04-07  2:08   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo
2011-04-04 22:24 ` [PATCH 14/14] x86-32, NUMA: Update remap allocator comments Tejun Heo
2011-04-07  2:09   ` [tip:x86/numa] x86-32, numa: " tip-bot for Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1301955840-7246-10-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=rientjes@google.com \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).