From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754811Ab1GFQqa (ORCPT ); Wed, 6 Jul 2011 12:46:30 -0400 Received: from va3ehsobe010.messaging.microsoft.com ([216.32.180.30]:21144 "EHLO VA3EHSOBE010.bigfish.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751150Ab1GFQq3 (ORCPT ); Wed, 6 Jul 2011 12:46:29 -0400 X-Greylist: delayed 902 seconds by postgrey-1.27 at vger.kernel.org; Wed, 06 Jul 2011 12:46:29 EDT X-SpamScore: -6 X-BigFish: VS-6(zzea8Nzz1202hzz8275dhz2dh87h2a8h668h839h61h) X-Spam-TCS-SCL: 0:0 X-Forefront-Antispam-Report: CIP:70.37.183.190;KIP:(null);UIP:(null);IPVD:NLI;H:mail.freescale.net;RD:none;EFVD:NLI X-FB-DOMAIN-IP-MATCH: fail From: Shawn Guo To: CC: , , , Shawn Guo , Grant Likely Subject: [PATCH v3 3/3] gpio/mxc: add device tree probe support Date: Thu, 7 Jul 2011 00:37:43 +0800 Message-ID: <1309970263-13239-4-git-send-email-shawn.guo@linaro.org> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1309970263-13239-1-git-send-email-shawn.guo@linaro.org> References: <1309970263-13239-1-git-send-email-shawn.guo@linaro.org> MIME-Version: 1.0 Content-Type: text/plain X-OriginatorOrg: sigmatel.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch adds device tree probe support for gpio-mxc driver. Signed-off-by: Shawn Guo Cc: Grant Likely Acked-by: Grant Likely --- .../devicetree/bindings/gpio/fsl-imx-gpio.txt | 22 +++++++++++++ drivers/gpio/gpio-mxc.c | 34 ++++++++++++++++--- 2 files changed, 50 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt new file mode 100644 index 0000000..4363ae4 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt @@ -0,0 +1,22 @@ +* Freescale i.MX/MXC GPIO controller + +Required properties: +- compatible : Should be "fsl,-gpio" +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all 32 pins, if + one number. If two numbers, the first one is the interrupt shared + by low 16 pins and the second one is for high 16 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). + +Example: + +gpio0: gpio@73f84000 { + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; +}; diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 310a46d..b7ff0a5 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include enum mxc_gpio_hwtype { @@ -120,6 +122,13 @@ static struct platform_device_id mxc_gpio_devtype[] = { } }; +static const struct of_device_id mxc_gpio_dt_ids[] = { + { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, + { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], }, + { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], }, + { /* sentinel */ } +}; + /* * MX2 has one interrupt *for all* gpio ports. The list is used * to save the references to all ports, so that mx2_gpio_irq_handler @@ -302,7 +311,13 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) { - enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data; + const struct of_device_id *of_id = + of_match_device(mxc_gpio_dt_ids, &pdev->dev); + enum mxc_gpio_hwtype hwtype; + + if (of_id) + pdev->id_entry = of_id->data; + hwtype = pdev->id_entry->driver_data; if (mxc_gpio_hwtype) { /* @@ -324,6 +339,7 @@ static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) static int __devinit mxc_gpio_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct mxc_gpio_port *port; struct resource *iores; int err; @@ -334,8 +350,6 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) if (!port) return -ENOMEM; - port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32; - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!iores) { err = -ENODEV; @@ -365,9 +379,6 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) writel(0, port->base + GPIO_IMR); writel(~0, port->base + GPIO_ISR); - /* gpio-mxc can be a generic irq chip */ - mxc_gpio_init_gc(port); - if (mxc_gpio_hwtype == IMX21_GPIO) { /* setup one handler for all GPIO interrupts */ if (pdev->id == 0) @@ -398,6 +409,16 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) if (err) goto out_bgpio_remove; + /* + * In dt case, we use gpio number range dynamically + * allocated by gpio core. + */ + port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base : + pdev->id * 32); + + /* gpio-mxc can be a generic irq chip */ + mxc_gpio_init_gc(port); + list_add_tail(&port->node, &mxc_gpio_ports); return 0; @@ -418,6 +439,7 @@ static struct platform_driver mxc_gpio_driver = { .driver = { .name = "gpio-mxc", .owner = THIS_MODULE, + .of_match_table = mxc_gpio_dt_ids, }, .probe = mxc_gpio_probe, .id_table = mxc_gpio_devtype, -- 1.7.4.1