From: jim.cromie@gmail.com
To: jbaron@redhat.com
Cc: greg@kroah.com, joe@perches.com, bart.vanassche@gmail.com,
linux-kernel@vger.kernel.org, Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH 22/26] dynamic_debug: early return if _ddebug table is empty
Date: Fri, 7 Oct 2011 14:33:28 -0600 [thread overview]
Message-ID: <1318019612-20068-23-git-send-email-jim.cromie@gmail.com> (raw)
In-Reply-To: <1318019612-20068-1-git-send-email-jim.cromie@gmail.com>
From: Jim Cromie <jim.cromie@gmail.com>
if _ddebug table is empty (which shouldn't happen in a CONFIG_DYNAMIC_DEBUG
build), then warn (BUILD_BUG??) and return early. This skips empty
table scan and parsing of setup-string, including the pr_info call
noting the parse.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 32 +++++++++++++++++---------------
1 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 80b5322..1a8941e 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -1272,23 +1272,25 @@ static int __init dynamic_debug_init(void)
int ret = 0;
int n = 0;
- if (__start___verbose != __stop___verbose) {
- iter = __start___verbose;
- modname = iter->modname;
- iter_start = iter;
- for (; iter < __stop___verbose; iter++) {
- if (strcmp(modname, iter->modname)) {
- ret = ddebug_add_module(iter_start, n, modname);
- if (ret)
- goto out_free;
- n = 0;
- modname = iter->modname;
- iter_start = iter;
- }
- n++;
+ if (__start___verbose == __stop___verbose) {
+ pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build");
+ return 1;
+ }
+ iter = __start___verbose;
+ modname = iter->modname;
+ iter_start = iter;
+ for (; iter < __stop___verbose; iter++) {
+ if (strcmp(modname, iter->modname)) {
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
+ n = 0;
+ modname = iter->modname;
+ iter_start = iter;
}
- ret = ddebug_add_module(iter_start, n, modname);
+ n++;
}
+ ret = ddebug_add_module(iter_start, n, modname);
/* ddebug_query boot param got passed -> set it up */
if (ddebug_setup_string[0] != '\0') {
--
1.7.4.4
next prev parent reply other threads:[~2011-10-07 20:35 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-21 21:54 jim.cromie
2011-09-21 21:54 ` [PATCH 01/26] dynamic_debug: drop enabled field from struct _ddebug, use flags & _DPRINTK_FLAGS_PRINT jim.cromie
2011-09-21 21:54 ` [PATCH 02/26] dynamic_debug: make dynamic-debug supersede DEBUG ccflag jim.cromie
2011-09-21 21:54 ` [PATCH 03/26] dynamic_debug: replace strcpy with strlcpy, in ddebug_setup_query() jim.cromie
2011-09-21 21:54 ` [PATCH 04/26] dynamic_debug: warn when >1 of each type of match-spec is given jim.cromie
2011-09-21 21:54 ` [PATCH 05/26] dynamic_debug: pr_err() call should not depend upon verbosity jim.cromie
2011-09-21 21:54 ` [PATCH 06/26] dynamic_debug: add trim_prefix() to provide source-root relative paths jim.cromie
2011-09-21 21:54 ` [PATCH 07/26] dynamic_debug: change verbosity at runtime jim.cromie
2011-09-21 21:54 ` [PATCH 08/26] dynamic_debug: define several levels of verbosity jim.cromie
2011-09-21 21:54 ` [PATCH 09/26] dynamic_debug: process multiple commands on a line jim.cromie
2011-09-21 21:54 ` [PATCH 10/26] dynamic_debug: enlarge command/query write buffer jim.cromie
2011-09-21 22:29 ` Joe Perches
2011-09-21 21:55 ` [PATCH 11/26] dynamic_debug: hoist locking in ddebug_change to callers jim.cromie
2011-09-21 21:55 ` [PATCH 12/26] dynamic_debug: dont kill entire facility on error parsing ddebug_query jim.cromie
2011-09-21 21:55 ` [PATCH 13/26] dynamic_debug: factor vpr_info_dq out of ddebug_parse_query jim.cromie
2011-09-21 21:55 ` [PATCH 14/26] dynamic_debug: refactor query_matches_callsite out of ddebug_change jim.cromie
2011-09-21 21:55 ` [PATCH 15/26] dynamic_debug: drop explicit foo != NULL checks jim.cromie
2011-09-21 21:55 ` [PATCH 16/26] dynamic_debug: save 'a' queries to pending-list for later (re)application jim.cromie
2011-09-21 21:55 ` [PATCH 17/26] dynamic_debug: remove pending query when flags zeroed jim.cromie
2011-09-21 21:55 ` [PATCH 18/26] dynamic_debug: describe_flags with '=[pmflta_]*' jim.cromie
2011-09-21 21:55 ` [PATCH 19/26] dynamic_debug: add flags filtering to flags spec jim.cromie
2011-09-21 21:55 ` [PATCH 20/26] dynamic_debug: make ddebug_describe_flags more generic jim.cromie
2011-09-21 21:55 ` [PATCH 21/26] dynamic_debug: add $DBGFS/dynamic_debug/pending file jim.cromie
2011-09-21 21:55 ` [PATCH 22/26] dynamic_debug: early return if _ddebug table is empty jim.cromie
2011-09-21 21:55 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-09-21 22:35 ` Randy Dunlap
2011-09-27 16:33 ` [patch 23/26 revised] jim.cromie
2011-09-27 16:33 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-10-10 18:54 ` Jonathan Corbet
2011-10-10 19:27 ` Jason Baron
2011-10-18 20:41 ` Jim Cromie
2011-10-19 20:52 ` Jason Baron
2011-09-21 21:55 ` [PATCH 24/26] dynamic_debug: reduce lineno field to a saner 18 bits jim.cromie
2011-09-21 21:55 ` [PATCH 25/26] dynamic_debug: add pr_fmt_dbg() for dynamic_pr_debug jim.cromie
2011-09-22 20:57 ` Joe Perches
2011-09-23 10:31 ` Bart Van Assche
2011-09-23 17:42 ` Joe Perches
2011-09-27 20:37 ` Jim Cromie
2011-09-27 23:36 ` Joe Perches
2011-09-28 2:54 ` Jim Cromie
2011-09-28 4:51 ` Joe Perches
2011-09-28 17:27 ` Jim Cromie
2011-09-29 15:24 ` Joe Perches
2011-10-08 19:07 ` Bart Van Assche
2011-10-08 20:53 ` Joe Perches
2011-09-27 21:40 ` [revised patches 25,26/26] dynamic_debug: add pr_fmt_*() jim.cromie
2011-09-27 21:40 ` [PATCH 25/26] dynamic_debug: add pr_fmt_debug() for dynamic_pr_debug jim.cromie
2011-09-27 21:41 ` [PATCH 26/26] scx200_acb: use pr_(info|warn|err|debug) and dynamic-debug facilities jim.cromie
2011-09-21 21:55 ` jim.cromie
2011-09-26 23:23 ` your mail Greg KH
2011-10-07 20:33 ` [PATCH 00/26] dynamic_debug: add pending queries, etc (~resend) jim.cromie
2011-10-07 20:33 ` [PATCH 01/26] dynamic_debug: drop enabled field from struct _ddebug, use flags & _DPRINTK_FLAGS_PRINT jim.cromie
2011-10-07 20:33 ` [PATCH 02/26] dynamic_debug: make dynamic-debug supersede DEBUG ccflag jim.cromie
2011-10-07 20:33 ` [PATCH 03/26] dynamic_debug: replace strcpy with strlcpy, in ddebug_setup_query() jim.cromie
2011-10-07 20:33 ` [PATCH 04/26] dynamic_debug: warn when >1 of each type of match-spec is given jim.cromie
2011-10-07 20:33 ` [PATCH 05/26] dynamic_debug: pr_err() call should not depend upon verbosity jim.cromie
2011-10-07 21:21 ` Joe Perches
2011-10-07 20:33 ` [PATCH 06/26] dynamic_debug: add trim_prefix() to provide source-root relative paths jim.cromie
2011-10-07 20:33 ` [PATCH 07/26] dynamic_debug: change verbosity at runtime jim.cromie
2011-10-07 20:33 ` [PATCH 08/26] dynamic_debug: define several levels of verbosity jim.cromie
2011-10-07 20:33 ` [PATCH 09/26] dynamic_debug: process multiple commands on a line jim.cromie
2011-10-07 20:33 ` [PATCH 10/26] dynamic_debug: enlarge command/query write buffer jim.cromie
2011-10-07 20:33 ` [PATCH 11/26] dynamic_debug: hoist locking in ddebug_change to callers jim.cromie
2011-10-07 20:33 ` [PATCH 12/26] dynamic_debug: dont kill entire facility on error parsing ddebug_query jim.cromie
2011-10-07 20:33 ` [PATCH 13/26] dynamic_debug: factor vpr_info_dq out of ddebug_parse_query jim.cromie
2011-10-07 20:33 ` [PATCH 14/26] dynamic_debug: refactor query_matches_callsite out of ddebug_change jim.cromie
2011-10-07 20:33 ` [PATCH 15/26] dynamic_debug: drop explicit foo != NULL checks jim.cromie
2011-10-07 20:33 ` [PATCH 16/26] dynamic_debug: save 'a' queries to pending-list for later (re)application jim.cromie
2011-10-07 20:33 ` [PATCH 17/26] dynamic_debug: remove pending query when flags zeroed jim.cromie
2011-10-07 20:33 ` [PATCH 18/26] dynamic_debug: describe_flags with '=[pmflta_]*' jim.cromie
2011-10-07 20:33 ` [PATCH 19/26] dynamic_debug: add flags filtering to flags spec jim.cromie
2011-10-07 20:33 ` [PATCH 20/26] dynamic_debug: make ddebug_describe_flags more generic jim.cromie
2011-10-07 20:33 ` [PATCH 21/26] dynamic_debug: add $DBGFS/dynamic_debug/pending file jim.cromie
2011-10-07 20:33 ` jim.cromie [this message]
2011-10-07 20:33 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-10-07 20:33 ` [PATCH 24/26] dynamic_debug: reduce lineno field to a saner 18 bits jim.cromie
2011-10-07 20:33 ` [PATCH 25/26] dynamic_debug: add pr_fmt_*() for each severity jim.cromie
2011-10-07 20:33 ` [PATCH 26/26] printk.h: fix pr_cont_once() to not use pr_fmt() jim.cromie
2011-10-07 20:45 ` Joe Perches
2011-10-18 18:52 ` [PATCH 00/26] dynamic_debug: add pending queries, etc (~resend) Greg KH
2011-10-19 20:57 ` Jason Baron
2011-10-19 22:29 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318019612-20068-23-git-send-email-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=bart.vanassche@gmail.com \
--cc=greg@kroah.com \
--cc=jbaron@redhat.com \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).