From: Pawel Moll <pawel.moll@arm.com>
To: Rusty Russell <rusty@rustcorp.com.au>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"virtualization@lists.linux-foundation.org"
<virtualization@lists.linux-foundation.org>
Subject: Re: [PATCH] virtio-mmio: Devices parameter parsing
Date: Mon, 21 Nov 2011 17:56:50 +0000 [thread overview]
Message-ID: <1321898210.3093.263.camel@hornet.cambridge.arm.com> (raw)
In-Reply-To: <1321886688.3093.248.camel@hornet.cambridge.arm.com>
On Mon, 2011-11-21 at 14:44 +0000, Pawel Moll wrote:
> I'll post v3 tonight or tomorrow.
Ok, it won't be v3 then...
I tried again, using your suggestions - see below (just the crucial bit,
however I have the kernel-parameters.txt bits ready as well). Parsing
works like charm, however when it gets to device_register() and
platform_device_register_resndata() I hit the same problem as
previously. Both are using slab allocator...
device_register()->device_add()->device_private_init()->kzalloc()
and
platform_device_register_resndata()->platform_device_register_full()->
platform_device_alloc()->kzalloc().
Essentially it seems that the parameter callbacks are just executed
waaay to early to do more than just set few integers here and there...
Any ideas?
Cheers!
Paweł
8<-------------------------------------------------------------------
@@ -443,6 +489,145 @@ static int __devexit virtio_mmio_remove(struct platform_device *pdev)
+/* Devices list parameter */
+
+#if defined(CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES)
+
+static struct device vm_cmdline_parent = {
+ .init_name = "virtio-mmio-cmdline",
+};
+
+static int vm_cmdline_parent_registered;
+static int vm_cmdline_id;
+
+static int vm_cmdline_set(const char *str,
+ const struct kernel_param *kp)
+{
+ int err;
+ struct resource resources[2];
+ unsigned long long val;
+ char *delim;
+ struct platform_device *pdev;
+
+ /* Size */
+ resources[0].flags = IORESOURCE_MEM;
+ resources[0].end = memparse(str, &delim) - 1;
+ if (*delim != '@')
+ return -EINVAL;
+ str = delim + 1;
+
+ /* Base address */
+ delim = strchr(str, ':');
+ if (!delim)
+ return -EINVAL;
+ /* kstrtoull is strict, so we have to temporarily truncate */
+ *delim = '\0';
+ err = kstrtoull(str, 0, &val);
+ *delim = ':';
+ if (err)
+ return err;
+ resources[0].start = val;
+ resources[0].end += val;
+ str = delim + 1;
+
+ /* Interrupt */
+ delim = strchr(str, ':');
+ if (delim) /* Optional device id delimiter */
+ *delim = '\0';
+ err = kstrtoull(str, 0, &val);
+ if (delim)
+ *delim = ':';
+ resources[1].flags = IORESOURCE_IRQ;
+ resources[1].start = resources[1].end = val;
+ str = delim + 1;
+
+ /* Optional device id */
+ if (delim) {
+ err = kstrtoull(str, 0, &val);
+ if (err)
+ return err;
+ vm_cmdline_id = val;
+ }
+
+ if (!vm_cmdline_parent_registered) {
+ err = device_register(&vm_cmdline_parent);
+ if (err) {
+ pr_err("Failed to register parent device!\n");
+ return err;
+ }
+ vm_cmdline_parent_registered = 1;
+ }
+
+ pr_info("Registering device virtio-mmio.%d at 0x%llx-0x%llx, IRQ %d.\n",
+ vm_cmdline_id++,
+ (unsigned long long)resources[0].start,
+ (unsigned long long)resources[0].end,
+ (int)resources[1].start);
+
+ pdev = platform_device_register_resndata(&vm_cmdline_parent,
+ "virtio-mmio", vm_cmdline_id++,
+ resources, ARRAY_SIZE(resources), NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
+}
+
+static int vm_cmdline_get_device(struct device *dev, void *data)
+{
+ char *buffer = data;
+ unsigned int len = strlen(buffer);
+ struct platform_device *pdev = to_platform_device(dev);
+
+ snprintf(buffer + len, PAGE_SIZE - len, "0x%llx@0x%llx:%llu:%d\n",
+ pdev->resource[0].end - pdev->resource[0].start + 1ULL,
+ (unsigned long long)pdev->resource[0].start,
+ (unsigned long long)pdev->resource[1].start,
+ pdev->id);
+ return 0;
+}
+
+static int vm_cmdline_get(char *buffer, const struct kernel_param *kp)
+{
+ buffer[0] = '\0';
+ device_for_each_child(&vm_cmdline_parent, buffer,
+ vm_cmdline_get_device);
+ return strlen(buffer) + 1;
+}
+
+static struct kernel_param_ops vm_cmdline_param_ops = {
+ .set = vm_cmdline_set,
+ .get = vm_cmdline_get,
+};
+
+module_param_cb(device, &vm_cmdline_param_ops, NULL, S_IRUSR);
+
+static int vm_unregister_cmdline_device(struct device *dev,
+ void *data)
+{
+ platform_device_unregister(to_platform_device(dev));
+
+ return 0;
+}
+
+static void vm_unregister_cmdline_devices(void)
+{
+ if (vm_cmdline_parent_registered) {
+ device_for_each_child(&vm_cmdline_parent, NULL,
+ vm_unregister_cmdline_device);
+ device_unregister(&vm_cmdline_parent);
+ vm_cmdline_parent_registered = 0;
+ }
+}
+
+#else
+
+static void virtio_mmio_unregister_cmdline_devices(void)
+{
+}
+
+#endif
+
/* Platform driver */
static struct of_device_id virtio_mmio_match[] = {
@@ -469,6 +654,7 @@ static int __init virtio_mmio_init(void)
static void __exit virtio_mmio_exit(void)
{
platform_driver_unregister(&virtio_mmio_driver);
+ vm_unregister_cmdline_devices();
}
module_init(virtio_mmio_init);
next prev parent reply other threads:[~2011-11-21 17:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 13:53 [PATCH] virtio-mmio: Devices parameter parsing Pawel Moll
2011-11-16 0:42 ` Rusty Russell
2011-11-16 18:13 ` Pawel Moll
2011-11-17 12:42 ` [PATCH v2] " Pawel Moll
2011-11-21 3:32 ` [PATCH] " Rusty Russell
2011-11-21 14:44 ` Pawel Moll
2011-11-21 17:56 ` Pawel Moll [this message]
2011-11-22 0:53 ` Rusty Russell
2011-11-23 18:08 ` Pawel Moll
2011-11-28 0:31 ` Rusty Russell
2011-11-29 17:36 ` Pawel Moll
2011-12-01 2:06 ` Rusty Russell
2011-12-12 17:53 ` Pawel Moll
2011-12-12 17:57 ` [PATCH 1/2] params: <level>_initcall-like kernel parameters Pawel Moll
2011-12-12 17:57 ` [PATCH 2/2] virtio-mmio: Devices parameter parsing Pawel Moll
2012-04-09 16:32 ` Sasha Levin
2012-04-10 12:53 ` Pawel Moll
2011-12-15 3:51 ` [PATCH 1/2] params: <level>_initcall-like kernel parameters Rusty Russell
2011-12-15 9:38 ` Pawel Moll
2011-11-22 0:44 ` [PATCH] virtio-mmio: Devices parameter parsing Rusty Russell
2012-05-09 17:30 Pawel Moll
2012-05-10 0:44 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321898210.3093.263.camel@hornet.cambridge.arm.com \
--to=pawel.moll@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).