linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [2.6.32+drm33-longterm] Linux 2.6.32.54+drm33.21
@ 2012-01-13  8:29 Stefan Bader
  0 siblings, 0 replies; only message in thread
From: Stefan Bader @ 2012-01-13  8:29 UTC (permalink / raw)
  To: linux-kernel, stable, kernel-team

I am announcing the release of the 2.6.32.54+drm33.21 longterm tree.

This tree is based on 2.6.32 and generally has all of the stable updates
applied. Except those to the DRM subsystem, which was based on 2.6.33 and
took updates from that upstream stable as long as that existed. It will
continue to add patches to the DRM subsystem as long as they are valid
according to the stable update rules (Documentation/stable_kernel_rules.txt).
DRM patches for this tree should be sent to kernel-team@lists.ubuntu.com.

This release contains patches from upstream 2.6.32.54, but dropped any patches
to the DRM subsystem.

The updated 2.6.32.y-drm33.z tree can be found at:
  git://git.kernel.org/pub/scm/linux/kernel/git/smb/linux-2.6.32.y-drm33.z.git
or
  git://kernel.ubuntu.com/smb/linux-2.6.32.y-drm33.z.git

and can be browsed through git web via:
  http://git.kernel.org/?p=linux/kernel/git/smb/linux-2.6.32.y-drm33.z.git;a=summary
or
  http://kernel.ubuntu.com/git?p=smb/linux-2.6.32.y-drm33.z.git;a=summary

-Stefan

------

* MAINTAINERS: stable: Update address
* Documentation: Update stable address
* firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
* offb: Fix setting of the pseudo-palette for >8bpp
* offb: Fix bug in calculating requested vram size
* asix: new device id
* reiserfs: Fix quota mount option parsing
* reiserfs: Force inode evictions before umount to avoid crash
* USB: update documentation for usbmon
* drivers/usb/class/cdc-acm.c: clear dangling pointer
* USB: isight: fix kernel bug when loading firmware
* usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
* USB: add quirk for another camera
* USB: omninet: fix write_room
* USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
* asix: fix infinite loop in rx_fixup()
* PM / Sleep: Fix race between CPU hotplug and freezer
* SCSI: scsi_dh: check queuedata pointer before proceeding further
* xfs: validate acl count
* xfs: fix acl count validation in xfs_acl_from_disk()
* Linux 2.6.32.54

 Documentation/HOWTO                         |    4 +-
 Documentation/development-process/5.Posting |    8 ++--
 Documentation/usb/usbmon.txt                |   14 +++--
 MAINTAINERS                                 |    2 +-
 Makefile                                    |    2 +-
 drivers/base/firmware_class.c               |   14 +++---
 drivers/net/usb/asix.c                      |    6 ++-
 drivers/scsi/device_handler/scsi_dh.c       |    7 ++-
 drivers/usb/class/cdc-acm.c                 |    4 ++
 drivers/usb/core/quirks.c                   |    5 ++-
 drivers/usb/misc/isight_firmware.c          |    6 ++-
 drivers/usb/serial/cp210x.c                 |    1 +
 drivers/usb/serial/omninet.c                |    2 +-
 drivers/usb/storage/usb.c                   |    1 +
 drivers/video/offb.c                        |   52 +++++++++----------
 fs/reiserfs/super.c                         |   27 ++++++----
 fs/xfs/linux-2.6/xfs_acl.c                  |    4 +-
 kernel/cpu.c                                |   74 +++++++++++++++++++++++++++
 18 files changed, 167 insertions(+), 66 deletions(-)

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 8495fc9..cb0863e 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -275,8 +275,8 @@ versions.
 If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
 kernel is the current stable kernel.

-2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
-released as needs dictate.  The normal release period is approximately
+2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
 instantly.
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index f622c1e..73c36ac 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -267,10 +267,10 @@ copies should go to:
    the linux-kernel list.

  - If you are fixing a bug, think about whether the fix should go into the
-   next stable update.  If so, stable@kernel.org should get a copy of the
-   patch.  Also add a "Cc: stable@kernel.org" to the tags within the patch
-   itself; that will cause the stable team to get a notification when your
-   fix goes into the mainline.
+   next stable update.  If so, stable@vger.kernel.org should get a copy of
+   the patch.  Also add a "Cc: stable@vger.kernel.org" to the tags within
+   the patch itself; that will cause the stable team to get a notification
+   when your fix goes into the mainline.

 When selecting recipients for a patch, it is good to have an idea of who
 you think will eventually accept the patch and get it merged.  While it
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 66f92d1..40818ff 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -43,10 +43,11 @@ This allows to filter away annoying devices that talk continuously.

 2. Find which bus connects to the desired device

-Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
-the device. Usually you do it by looking for the vendor string. If you have
-many similar devices, unplug one and compare two /proc/bus/usb/devices outputs.
-The T-line will have a bus number. Example:
+Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
+to the device. Usually you do it by looking for the vendor string. If you have
+many similar devices, unplug one and compare the two
+/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
+Example:

 T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
 D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
@@ -54,7 +55,10 @@ P:  Vendor=0557 ProdID=2004 Rev= 1.00
 S:  Manufacturer=ATEN
 S:  Product=UC100KM V2.00

-Bus=03 means it's bus 3.
+"Bus=03" means it's bus 3. Alternatively, you can look at the output from
+"lsusb" and get the bus number from the appropriate line. Example:
+
+Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00

 3. Start 'cat'

diff --git a/MAINTAINERS b/MAINTAINERS
index ea3302f..613da5d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5010,7 +5010,7 @@ F:	arch/alpha/kernel/srm_env.c

 STABLE BRANCH
 M:	Greg Kroah-Hartman <greg@kroah.com>
-L:	stable@kernel.org
+L:	stable@vger.kernel.org
 S:	Maintained

 STAGING SUBSYSTEM
diff --git a/Makefile b/Makefile
index c9803a7..3491ced 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = .53+drm33.21
+EXTRAVERSION = .54+drm33.21
 NAME = Man-Eating Seals of Antiquity

 # *DOCUMENTATION*
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index e0e6570..f6872f9 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -161,13 +161,13 @@ static ssize_t firmware_loading_store(struct device *dev,
 	int loading = simple_strtol(buf, NULL, 10);
 	int i;

+	mutex_lock(&fw_lock);
+
+	if (!fw_priv->fw)
+		goto out;
+
 	switch (loading) {
 	case 1:
-		mutex_lock(&fw_lock);
-		if (!fw_priv->fw) {
-			mutex_unlock(&fw_lock);
-			break;
-		}
 		firmware_free_data(fw_priv->fw);
 		memset(fw_priv->fw, 0, sizeof(struct firmware));
 		/* If the pages are not owned by 'struct firmware' */
@@ -178,7 +178,6 @@ static ssize_t firmware_loading_store(struct device *dev,
 		fw_priv->page_array_size = 0;
 		fw_priv->nr_pages = 0;
 		set_bit(FW_STATUS_LOADING, &fw_priv->status);
-		mutex_unlock(&fw_lock);
 		break;
 	case 0:
 		if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) {
@@ -209,7 +208,8 @@ static ssize_t firmware_loading_store(struct device *dev,
 		fw_load_abort(fw_priv);
 		break;
 	}
-
+out:
+	mutex_unlock(&fw_lock);
 	return count;
 }

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 73123486..e794b39 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -339,7 +339,7 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)

 		skb_pull(skb, (size + 1) & 0xfffe);

-		if (skb->len == 0)
+		if (skb->len < sizeof(header))
 			break;

 		head = (u8 *) skb->data;
@@ -1522,6 +1522,10 @@ static const struct usb_device_id	products [] = {
 	// ASIX 88772a
 	USB_DEVICE(0x0db0, 0xa877),
 	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Asus USB Ethernet Adapter
+	USB_DEVICE (0x0b95, 0x7e2b),
+	.driver_info = (unsigned long) &ax88772_info,
 },
 	{ },		// END
 };
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index bfec4fa..2d04d61 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -432,7 +432,12 @@ int scsi_dh_activate(struct request_queue *q)

 	spin_lock_irqsave(q->queue_lock, flags);
 	sdev = q->queuedata;
-	if (sdev && sdev->scsi_dh_data)
+	if (!sdev) {
+		spin_unlock_irqrestore(q->queue_lock, flags);
+		return SCSI_DH_NOSYS;
+	}
+
+	if (sdev->scsi_dh_data)
 		scsi_dh = sdev->scsi_dh_data->scsi_dh;
 	if (!scsi_dh || !get_device(&sdev->sdev_gendev))
 		err = SCSI_DH_NOSYS;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index cec9bff..653f853 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1264,6 +1264,8 @@ made_compressed_probe:
 		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
 		if (i < 0) {
 			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
 			goto skip_countries;
 		}

@@ -1272,6 +1274,8 @@ made_compressed_probe:
 		if (i < 0) {
 			device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
 			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
 			goto skip_countries;
 		}
 	}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index e163df9..4923702 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -114,9 +114,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

-	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
 	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },

+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },

diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index b897f65..6199f12 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -54,8 +54,9 @@ static int isight_firmware_load(struct usb_interface *intf,

 	ptr = firmware->data;

+	buf[0] = 0x01;
 	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
 	     300) != 1) {
 		printk(KERN_ERR
 		       "Failed to initialise isight firmware loader\n");
@@ -99,8 +100,9 @@ static int isight_firmware_load(struct usb_interface *intf,
 		}
 	}

+	buf[0] = 0x00;
 	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
 	     300) != 1) {
 		printk(KERN_ERR "isight firmware loading completion failed\n");
 		ret = -ENODEV;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f77908b..8dcaf42 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -94,6 +94,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+	{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
 	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 0622650..c116bd9 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -317,7 +317,7 @@ static int omninet_write_room(struct tty_struct *tty)
 	int room = 0; /* Default: no room */

 	/* FIXME: no consistent locking for write_urb_busy */
-	if (wport->write_urb_busy)
+	if (!wport->write_urb_busy)
 		room = wport->bulk_out_size - OMNINET_HEADERLEN;

 	dbg("%s - returns %d", __func__, room);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 33197fa..6ce1095 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1025,6 +1025,7 @@ static struct usb_driver usb_storage_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	usb_storage_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };

 static int __init usb_stor_init(void)
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index b043ac8..dbc8274 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -100,36 +100,32 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 			  u_int transp, struct fb_info *info)
 {
 	struct offb_par *par = (struct offb_par *) info->par;
-	int i, depth;
-	u32 *pal = info->pseudo_palette;
-
-	depth = info->var.bits_per_pixel;
-	if (depth == 16)
-		depth = (info->var.green.length == 5) ? 15 : 16;
-
-	if (regno > 255 ||
-	    (depth == 16 && regno > 63) ||
-	    (depth == 15 && regno > 31))
-		return 1;
-
-	if (regno < 16) {
-		switch (depth) {
-		case 15:
-			pal[regno] = (regno << 10) | (regno << 5) | regno;
-			break;
-		case 16:
-			pal[regno] = (regno << 11) | (regno << 5) | regno;
-			break;
-		case 24:
-			pal[regno] = (regno << 16) | (regno << 8) | regno;
-			break;
-		case 32:
-			i = (regno << 8) | regno;
-			pal[regno] = (i << 16) | i;
-			break;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+		u32 *pal = info->pseudo_palette;
+		u32 cr = red >> (16 - info->var.red.length);
+		u32 cg = green >> (16 - info->var.green.length);
+		u32 cb = blue >> (16 - info->var.blue.length);
+		u32 value;
+
+		if (regno >= 16)
+			return -EINVAL;
+
+		value = (cr << info->var.red.offset) |
+			(cg << info->var.green.offset) |
+			(cb << info->var.blue.offset);
+		if (info->var.transp.length > 0) {
+			u32 mask = (1 << info->var.transp.length) - 1;
+			mask <<= info->var.transp.offset;
+			value |= mask;
 		}
+		pal[regno] = value;
+		return 0;
 	}

+	if (regno > 255)
+		return -EINVAL;
+
 	red >>= 8;
 	green >>= 8;
 	blue >>= 8;
@@ -381,7 +377,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 				int pitch, unsigned long address,
 				int foreign_endian, struct device_node *dp)
 {
-	unsigned long res_size = pitch * height * (depth + 7) / 8;
+	unsigned long res_size = pitch * height;
 	struct offb_par *par = &default_par;
 	unsigned long res_start = address;
 	struct fb_fix_screeninfo *fix;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f0ad05f..7cb1285 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -445,16 +445,20 @@ int remove_save_link(struct inode *inode, int truncate)
 static void reiserfs_kill_sb(struct super_block *s)
 {
 	if (REISERFS_SB(s)) {
-		if (REISERFS_SB(s)->xattr_root) {
-			d_invalidate(REISERFS_SB(s)->xattr_root);
-			dput(REISERFS_SB(s)->xattr_root);
-			REISERFS_SB(s)->xattr_root = NULL;
-		}
-		if (REISERFS_SB(s)->priv_root) {
-			d_invalidate(REISERFS_SB(s)->priv_root);
-			dput(REISERFS_SB(s)->priv_root);
-			REISERFS_SB(s)->priv_root = NULL;
-		}
+		/*
+		 * Force any pending inode evictions to occur now. Any
+		 * inodes to be removed that have extended attributes
+		 * associated with them need to clean them up before
+		 * we can release the extended attribute root dentries.
+		 * shrink_dcache_for_umount will BUG if we don't release
+		 * those before it's called so ->put_super is too late.
+		 */
+		shrink_dcache_sb(s);
+
+		dput(REISERFS_SB(s)->xattr_root);
+		REISERFS_SB(s)->xattr_root = NULL;
+		dput(REISERFS_SB(s)->priv_root);
+		REISERFS_SB(s)->priv_root = NULL;
 	}

 	kill_block_super(s);
@@ -1149,7 +1153,8 @@ static void handle_quota_files(struct super_block *s, char **qf_names,
 			kfree(REISERFS_SB(s)->s_qf_names[i]);
 		REISERFS_SB(s)->s_qf_names[i] = qf_names[i];
 	}
-	REISERFS_SB(s)->s_jquota_fmt = *qfmt;
+	if (*qfmt)
+		REISERFS_SB(s)->s_jquota_fmt = *qfmt;
 }
 #endif

diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 4c7b145..ad60d61 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -37,9 +37,11 @@ xfs_acl_from_disk(struct xfs_acl *aclp)
 	struct posix_acl_entry *acl_e;
 	struct posix_acl *acl;
 	struct xfs_acl_entry *ace;
-	int count, i;
+	unsigned int count, i;

 	count = be32_to_cpu(aclp->acl_cnt);
+	if (count > XFS_ACL_MAX_ENTRIES)
+		return ERR_PTR(-EFSCORRUPTED);

 	acl = posix_acl_alloc(count, GFP_KERNEL);
 	if (!acl)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 7e8b6ac..3f2f04f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -14,6 +14,7 @@
 #include <linux/kthread.h>
 #include <linux/stop_machine.h>
 #include <linux/mutex.h>
+#include <linux/suspend.h>

 #ifdef CONFIG_SMP
 /* Serializes the updates to cpu_online_mask, cpu_present_mask */
@@ -442,6 +443,79 @@ static int alloc_frozen_cpus(void)
 	return 0;
 }
 core_initcall(alloc_frozen_cpus);
+
+/*
+ * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
+ * hotplug when tasks are about to be frozen. Also, don't allow the freezer
+ * to continue until any currently running CPU hotplug operation gets
+ * completed.
+ * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
+ * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
+ * CPU hotplug path and released only after it is complete. Thus, we
+ * (and hence the freezer) will block here until any currently running CPU
+ * hotplug operation gets completed.
+ */
+void cpu_hotplug_disable_before_freeze(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 1;
+	cpu_maps_update_done();
+}
+
+
+/*
+ * When tasks have been thawed, re-enable regular CPU hotplug (which had been
+ * disabled while beginning to freeze tasks).
+ */
+void cpu_hotplug_enable_after_thaw(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 0;
+	cpu_maps_update_done();
+}
+
+/*
+ * When callbacks for CPU hotplug notifications are being executed, we must
+ * ensure that the state of the system with respect to the tasks being frozen
+ * or not, as reported by the notification, remains unchanged *throughout the
+ * duration* of the execution of the callbacks.
+ * Hence we need to prevent the freezer from racing with regular CPU hotplug.
+ *
+ * This synchronization is implemented by mutually excluding regular CPU
+ * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
+ * Hibernate notifications.
+ */
+static int
+cpu_hotplug_pm_callback(struct notifier_block *nb,
+			unsigned long action, void *ptr)
+{
+	switch (action) {
+
+	case PM_SUSPEND_PREPARE:
+	case PM_HIBERNATION_PREPARE:
+		cpu_hotplug_disable_before_freeze();
+		break;
+
+	case PM_POST_SUSPEND:
+	case PM_POST_HIBERNATION:
+		cpu_hotplug_enable_after_thaw();
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+
+int cpu_hotplug_pm_sync_init(void)
+{
+	pm_notifier(cpu_hotplug_pm_callback, 0);
+	return 0;
+}
+core_initcall(cpu_hotplug_pm_sync_init);
+
 #endif /* CONFIG_PM_SLEEP_SMP */

 /**

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2012-01-13  8:29 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-13  8:29 [2.6.32+drm33-longterm] Linux 2.6.32.54+drm33.21 Stefan Bader

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).