From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Dajun Chen <Dajun.Chen2@diasemi.com>
Subject: [PATCH 07/07] ONKEY: OnKey module for DA9052/53 PMIC v1
Date: Tue, 17 Jan 2012 18:59:11 +0530 [thread overview]
Message-ID: <1326806951.3542.342.camel@dhruva> (raw)
On-key Driver for Dialog Semiconductor DA9052 PMICs.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/input/misc/Kconfig | 10 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9052_onkey.c | 180 +++++++++++++++++++++++++++++++++++++
3 files changed, 191 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/da9052_onkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7b46781..c123fbe 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -455,6 +455,16 @@ config INPUT_RB532_BUTTON
To compile this driver as a module, choose M here: the
module will be called rb532_button.
+config INPUT_DA9052_ONKEY
+ tristate "Dialog DA9052 Onkey"
+ depends on PMIC_DA9052
+ help
+ Support the ONKEY of Dialog DA9052 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9052_onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 46671a8..a6d8de0 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
+obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
new file mode 100644
index 0000000..9646c1e
--- /dev/null
+++ b/drivers/input/misc/da9052_onkey.c
@@ -0,0 +1,180 @@
+/*
+ * ON pin driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+struct da9052_onkey {
+ struct da9052 *da9052;
+ struct input_dev *input;
+ struct delayed_work work;
+ int irq;
+};
+
+static void da9052_onkey_query(struct da9052_onkey *onkey)
+{
+ int ret;
+
+ ret = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
+ if (ret < 0) {
+ dev_err(onkey->da9052->dev,
+ "da9052_onkey_report_event da9052_reg_read error %d\n",
+ ret);
+ ret = 1;
+ } else {
+ ret = ret & DA9052_EVENTB_ENONKEY;
+ input_report_key(onkey->input, KEY_POWER, ret);
+ input_sync(onkey->input);
+ }
+
+ if (ret)
+ schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+}
+
+static void da9052_onkey_work(struct work_struct *work)
+{
+ struct da9052_onkey *onkey = container_of(work, struct da9052_onkey,
+ work.work);
+
+ da9052_onkey_query(onkey);
+}
+
+static irqreturn_t da9052_onkey_irq(int irq, void *data)
+{
+ struct da9052_onkey *onkey = data;
+
+ da9052_onkey_work(&onkey->work.work);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit da9052_onkey_probe(struct platform_device *pdev)
+{
+ struct da9052_onkey *onkey;
+ int error;
+
+ onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
+ if (!onkey) {
+ dev_err(&pdev->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ onkey->input = input_allocate_device();
+ if (!onkey->input) {
+ error = -ENOMEM;
+ dev_err(&pdev->dev, "Failed to allocate input device, %d\n",
+ error);
+ goto err_mem;
+ }
+
+ onkey->da9052 = dev_get_drvdata(pdev->dev.parent);
+ if (!onkey->da9052) {
+ error = -ENOMEM;
+ dev_err(&pdev->dev, "Failed to get the driver's data, %d\n",
+ error);
+ goto err_input;
+ }
+
+ onkey->irq = platform_get_irq_byname(pdev, "ONKEY");
+ if (onkey->irq < 0) {
+ error = -ENXIO;
+ dev_err(&pdev->dev,
+ "Failed to get an IRQ for input device, %d\n",
+ onkey->irq);
+ goto err_input;
+ }
+
+ onkey->input->evbit[0] = BIT_MASK(EV_KEY);
+ onkey->input->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ onkey->input->name = "da9052-onkey";
+ onkey->input->phys = "da9052-onkey/input0";
+ onkey->input->dev.parent = &pdev->dev;
+
+ INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
+
+ error = request_threaded_irq(onkey->da9052->irq_base + onkey->irq, NULL,
+ da9052_onkey_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "ONKEY", onkey);
+ if (error < 0) {
+ dev_err(onkey->da9052->dev,
+ "Failed to register ONKEY IRQ %d, error = %d\n",
+ onkey->da9052->irq_base + onkey->irq, error);
+ goto err_req_irq;
+ }
+
+ error = input_register_device(onkey->input);
+ if (error) {
+ dev_err(&pdev->dev, "Unable to register input device, %d\n",
+ error);
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+
+ return 0;
+
+err_irq:
+ free_irq(onkey->da9052->irq_base + onkey->irq, onkey);
+err_req_irq:
+ cancel_delayed_work_sync(&onkey->work);
+err_input:
+ input_free_device(onkey->input);
+err_mem:
+ kfree(onkey);
+ return error;
+}
+
+static int __devexit da9052_onkey_remove(struct platform_device *pdev)
+{
+ struct da9052_onkey *onkey = platform_get_drvdata(pdev);
+
+ free_irq(onkey->da9052->irq_base + onkey->irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+ input_unregister_device(onkey->input);
+ kfree(onkey);
+
+ return 0;
+}
+
+static struct platform_driver da9052_onkey_driver = {
+ .probe = da9052_onkey_probe,
+ .remove = __devexit_p(da9052_onkey_remove),
+ .driver = {
+ .name = "da9052-onkey",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9052_onkey_init(void)
+{
+ return platform_driver_register(&da9052_onkey_driver);
+}
+module_init(da9052_onkey_init);
+
+static void __exit da9052_onkey_exit(void)
+{
+ platform_driver_unregister(&da9052_onkey_driver);
+}
+module_exit(da9052_onkey_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9052");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-onkey");
next reply other threads:[~2012-01-17 13:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-17 13:29 Ashish Jangam [this message]
2012-01-17 19:55 ` [PATCH 07/07] ONKEY: OnKey module for DA9052/53 PMIC v1 Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA3ED@KCHJEXMB02.kpit.com>
2012-02-01 8:28 ` Ashish Jangam
2012-02-01 9:50 ` Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA575@KCHJEXMB02.kpit.com>
2012-02-03 13:24 ` Ashish Jangam
2012-02-03 13:52 ` Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA5AA@KCHJEXMB02.kpit.com>
2012-02-06 8:02 ` Ashish Jangam
2012-02-06 11:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326806951.3542.342.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=Dajun.Chen2@diasemi.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).