From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758563Ab2BJGkh (ORCPT ); Fri, 10 Feb 2012 01:40:37 -0500 Received: from mailout3.samsung.com ([203.254.224.33]:30437 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758361Ab2BJGke (ORCPT ); Fri, 10 Feb 2012 01:40:34 -0500 X-AuditID: cbfee61a-b7b78ae000001ceb-a2-4f34bbdf81e9 From: MyungJoo Ham To: linux-kernel@vger.kernel.org Cc: NeilBrown , Randy Dunlap , Mike Lockwood , =?UTF-8?q?Arve=20Hj=C3=B8nnevag?= , Kyungmin Park , Donggeun Kim , Greg KH , Arnd Bergmann , Linus Walleij , Dmitry Torokhov , Morten CHRISTIANSEN , Mark Brown , John Stultz , Joerg Roedel , myungjoo.ham@gmail.com Subject: [PATCH v5 5/5] Extcon: adc-jack driver to support 3.5 pi or simliar devices Date: Fri, 10 Feb 2012 15:40:38 +0900 Message-id: <1328856038-21912-6-git-send-email-myungjoo.ham@samsung.com> X-Mailer: git-send-email 1.7.4.1 In-reply-to: <1328856038-21912-1-git-send-email-myungjoo.ham@samsung.com> References: <1327021317-10222-1-git-send-email-myungjoo.ham@samsung.com> <1328856038-21912-1-git-send-email-myungjoo.ham@samsung.com> X-Brightmail-Tracker: AAAAAA== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org External connector devices that decides connection information based on ADC values may use adc-jack device driver. The user simply needs to provide a table of adc range and connection states. Then, extcon framework will automatically notify others. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park --- drivers/extcon/Kconfig | 7 ++- drivers/extcon/Makefile | 1 + drivers/extcon/adc_jack.c | 188 +++++++++++++++++++++++++++++++++++++++ include/linux/extcon/adc_jack.h | 107 ++++++++++++++++++++++ 4 files changed, 302 insertions(+), 1 deletions(-) create mode 100644 drivers/extcon/adc_jack.c create mode 100644 include/linux/extcon/adc_jack.h diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 3fa3c22..7487384 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -19,4 +19,9 @@ config EXTCON_GPIO Say Y here to enable GPIO based extcon support. Note that GPIO extcon supports single state per extcon instance. -endif # MULTISTATE_SWITCH +config EXTCON_ADC_JACK + tristate "ADC Jack extcon support" + help + Say Y here to enable extcon device driver based on ADC values. + +endif # EXTCON diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 2c46d41..ca558a0 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EXTCON) += extcon_class.o obj-$(CONFIG_EXTCON_GPIO) += extcon_gpio.o +obj-$(CONFIG_EXTCON_ADC_JACK) += adc_jack.o diff --git a/drivers/extcon/adc_jack.c b/drivers/extcon/adc_jack.c new file mode 100644 index 0000000..9cad565 --- /dev/null +++ b/drivers/extcon/adc_jack.c @@ -0,0 +1,188 @@ +/* + * drivers/extcon/adc_jack.c + * + * Analog Jack extcon driver with ADC-based detection capability. + * + * Copyright (C) 2012 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +static void adc_jack_handler(struct work_struct *work) +{ + struct adc_jack_data *data = container_of(to_delayed_work(work), + struct adc_jack_data, + handler); + u32 adc, state = 0; + int ret; + int i; + + if (!data->ready) + return; + + ret = data->get_adc(&adc); + if (ret) { + dev_err(data->edev.dev, "get_adc() error: %d\n", ret); + return; + } + + /* Get state from adc value with adc_condition */ + for (i = 0; i < data->num_conditions; i++) { + struct adc_jack_cond *def = &data->adc_condition[i]; + if (!def->state) + break; + if (def->min_adc <= adc && def->max_adc >= adc) { + state = def->state; + break; + } + } + /* if no def has met, it means state = 0 (no cables attached) */ + + extcon_set_state(&data->edev, state); +} + +static irqreturn_t adc_jack_irq_thread(int irq, void *_data) +{ + struct adc_jack_data *data = _data; + + schedule_delayed_work(&data->handler, data->handling_delay); + + return IRQ_HANDLED; +} + +static int adc_jack_probe(struct platform_device *pdev) +{ + struct adc_jack_data *data; + struct adc_jack_pdata *pdata = pdev->dev.platform_data; + int i, err = 0; + + data = kzalloc(sizeof(struct adc_jack_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->edev.name = pdata->name; + + if (pdata->cable_names) + data->edev.supported_cable = pdata->cable_names; + else + data->edev.supported_cable = extcon_cable_name; + + /* Check the length of array and set num_cables */ + for (i = 0; data->edev.supported_cable[i]; i++) + ; + if (i == 0 || i > SUPPORTED_CABLE_MAX) { + err = -EINVAL; + dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n", + i - 1); + goto err_alloc; + } + data->num_cables = i; + + if (!pdata->adc_condition || + !pdata->adc_condition[0].state) { + err = -EINVAL; + dev_err(&pdev->dev, "error: adc_condition not defined.\n"); + goto err_alloc; + } + data->adc_condition = pdata->adc_condition; + + /* Check the length of array and set num_conditions */ + for (i = 0; data->adc_condition[i].state; i++) + ; + data->num_conditions = i; + + if (!pdata->get_adc) { + dev_err(&pdev->dev, "error: get_adc() is mandatory.\n"); + err = -EINVAL; + goto err_alloc; + } + data->get_adc = pdata->get_adc; + data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); + + INIT_DELAYED_WORK_DEFERRABLE(&data->handler, adc_jack_handler); + + platform_set_drvdata(pdev, data); + + if (pdata->irq) { + data->irq = pdata->irq; + + err = request_threaded_irq(data->irq, NULL, + adc_jack_irq_thread, + pdata->irq_flags, pdata->name, + data); + + if (err) { + dev_err(&pdev->dev, "error: irq %d\n", data->irq); + err = -EINVAL; + goto err_initwork; + } + } + err = extcon_dev_register(&data->edev, &pdev->dev); + if (err) + goto err_irq; + + data->ready = true; + + goto out; + +err_irq: + if (data->irq) + free_irq(data->irq, data); +err_initwork: + cancel_delayed_work_sync(&data->handler); +err_alloc: + kfree(data); +out: + return err; +} + +static int __devexit adc_jack_remove(struct platform_device *pdev) +{ + struct adc_jack_data *data = platform_get_drvdata(pdev); + + extcon_dev_unregister(&data->edev); + if (data->irq) + free_irq(data->irq, data); + platform_set_drvdata(pdev, NULL); + kfree(data); + + return 0; +} + +static struct platform_driver adc_jack_driver = { + .probe = adc_jack_probe, + .remove = __devexit_p(adc_jack_remove), + .driver = { + .name = "adc-jack", + .owner = THIS_MODULE, + }, +}; + +static int __init adc_jack_init(void) +{ + return platform_driver_register(&adc_jack_driver); +} + +static void __exit adc_jack_exit(void) +{ + platform_driver_unregister(&adc_jack_driver); +} + +module_init(adc_jack_init); +module_exit(adc_jack_exit); + +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_DESCRIPTION("ADC jack extcon driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/extcon/adc_jack.h b/include/linux/extcon/adc_jack.h new file mode 100644 index 0000000..1650b85 --- /dev/null +++ b/include/linux/extcon/adc_jack.h @@ -0,0 +1,107 @@ +/* + * include/linux/extcon/adc_jack.h + * + * Analog Jack extcon driver with ADC-based detection capability. + * + * Copyright (C) 2012 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _EXTCON_ADC_JACK_H_ +#define _EXTCON_ADC_JACK_H_ __FILE__ +#include + +/** + * struct adc_jack_data - internal data for adc_jack device driver + * @edev - extcon device. + * @cable_names - list of supported cables. + * @num_cables - size of cable_names. + * @adc_condition - list of adc value conditions. + * @num_condition - size of adc_condition. + * @irq - irq number of attach/detach event (0 if not exist). + * @handling_delay - interrupt handler will schedule extcon event + * handling at handling_delay jiffies. + * @handler - extcon event handler called by interrupt handler. + * @get_adc - a callback to get ADC value to identify state. + * @ready - true if it is safe to run handler. + */ +struct adc_jack_data { + struct extcon_dev edev; + + const char **cable_names; + int num_cables; + struct adc_jack_cond *adc_condition; + int num_conditions; + + int irq; + unsigned long handling_delay; /* in jiffies */ + struct delayed_work handler; + + int (*get_adc)(u32 *value); + + bool ready; +}; + +/** + * struct adc_jack_cond - condition to use an extcon state + * @state - the corresponding extcon state (if 0, this struct denotes + * the last adc_jack_cond element among the array) + * @min_adc - min adc value for this condition + * @max_adc - max adc value for this condition + * + * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means + * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and + * 1 are attached (1<<0 | 1<<1 == 0x3) + * + * Note that you don't need to describe condition for "no cable attached" + * because when no adc_jack_cond is met, state = 0 is automatically chosen. + */ +struct adc_jack_cond { + u32 state; /* extcon state value. 0 if invalid */ + + u32 min_adc; + u32 max_adc; +}; + +/** + * struct adc_jack_pdata - platform data for adc jack device. + * @name - name of the extcon device. If null, "adc-jack" is used. + * @cable_names - array of cable names ending with null. If the array itself + * if null, extcon standard cable names are chosen. + * @adc_contition - array of struct adc_jack_cond conditions ending + * with .state = 0 entry. This describes how to decode + * adc values into extcon state. + * @irq - IRQ number that is triggerred by cable attach/detach + * events. If irq = 0, use should manually update extcon state + * with extcon APIs. + * @irq_flags - irq flags used for the @irq + * @handling_delay_ms - in some devices, we need to read ADC value some + * milli-seconds after the interrupt occurs. You may + * describe such delays with @handling_delay_ms, which + * is rounded-off by jiffies. + * @get_adc - the callback to read ADC value to identify cable states. + */ +struct adc_jack_pdata { + const char *name; + /* + * NULL if standard extcon names are used. + * The last entry should be NULL + */ + const char **cable_names; + /* The last entry's state should be 0 */ + struct adc_jack_cond *adc_condition; + + int irq; /* Jack insertion/removal interrupt */ + unsigned long irq_flags; + unsigned long handling_delay_ms; /* in ms */ + + /* When we have ADC subsystem, this can be generalized. */ + int (*get_adc)(u32 *value); +}; + +#endif /* _EXTCON_ADC_JACK_H */ -- 1.7.4.1