On Wed, 2012-02-15 at 23:18 -0800, Divy Le Ray wrote:
[...]
> The following changes since commit 38118a598df73d5a9fd72bf04910e8298db82a46:
> 
>    linux-firmware: brcm: add firmware for bcm43236 usb device 
> (2012-02-11 19:20:10 +0000)
> 
> are available in the git repository at:
>    git://git.chelsio.net/pub/git/linux-firmware for-upstream
> 
> Divy Le Ray (3):
>        linux-firmware: rename t4fw.bin
>        linux-firmware: add t4fw-1.4.16.0.bin firmware for cxgb4 driver.
>        linux-firmware: update cxgb3 driver firmware to revision 7.12.0
> 
>   WHENCE                  |    4 +++-
>   cxgb3/t3fw-7.12.0.bin   |  Bin 0 -> 31812 bytes
>   cxgb4/t4fw-1.3.10.0.bin |  Bin 0 -> 241664 bytes
>   cxgb4/t4fw-1.4.16.0.bin |  Bin 0 -> 298496 bytes
>   cxgb4/t4fw.bin          |  Bin 241664 -> 17 bytes
>   5 files changed, 3 insertions(+), 1 deletions(-)
>   create mode 100755 cxgb3/t3fw-7.12.0.bin
>   create mode 100644 cxgb4/t4fw-1.3.10.0.bin
>   create mode 100644 cxgb4/t4fw-1.4.16.0.bin
>   mode change 100644 => 120000 cxgb4/t4fw.bin

Are there any versions of the cxgb4 driver that will specifically
request cxgb4/t4fw-1.3.10.0.bin?  If not, what's the point of keeping it
around after changing the cxgb4/t4fw.bin symlink?

Ben.

> Cheers,
> Divy
> 
> 

-- 
Ben Hutchings
Beware of programmers who carry screwdrivers. - Leonard Brandwein