[PATCH v5 0/3] netdev/of/phy: MDIO bus multiplexer support.

[PATCH v5 0/3] netdev/of/phy: MDIO bus multiplexer support.

[David Daney]

From: David Daney <david.daney@cavium.com>

This code has been working well for about six months on a couple of
different configurations (boards), so I thought it would be a good
time to send it out again, and I hope get it on the path towards
merging.

v5: Correct Kconfig depends in 3/3 as noticed by David Miller.

v4: Correct some comment text and rename a couple of variables to
    better reflect their purpose.

v3: Update binding to use "mdio-mux-gpio" compatible property.
    Cleanups suggested by Grant Likely.  Now uses the driver probe
    deferral mechanism if GPIOs or parent bus not available.

v2: Update bindings to use "reg" and "mdio-parent-bus" instead of
    "cell-index" and "parent-bus"

v1:

We have several different boards with a multiplexer in the MDIO bus.
There is an MDIO bus controller connected to a switching device with
several child MDIO busses.

Everything is wired up using device tree bindings.

 1/3 - New of_mdio_find_bus() function used to help configuring the
       driver topology.

 2/3 - MDIO bus multiplexer framework.

 3/3 - A driver for a GPIO controlled multiplexer.

David Daney (3):
  netdev/of/phy: New function: of_mdio_find_bus().
  netdev/of/phy: Add MDIO bus multiplexer support.
  netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.

 .../devicetree/bindings/net/mdio-mux-gpio.txt      |  127 +++++++++++++
 Documentation/devicetree/bindings/net/mdio-mux.txt |  136 ++++++++++++++
 drivers/net/phy/Kconfig                            |   18 ++
 drivers/net/phy/Makefile                           |    2 +
 drivers/net/phy/mdio-mux-gpio.c                    |  142 +++++++++++++++
 drivers/net/phy/mdio-mux.c                         |  192 ++++++++++++++++++++
 drivers/net/phy/mdio_bus.c                         |   32 ++++
 drivers/of/of_mdio.c                               |    2 +
 include/linux/mdio-mux.h                           |   21 ++
 include/linux/of_mdio.h                            |    2 +
 10 files changed, 674 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/net/mdio-mux.txt
 create mode 100644 drivers/net/phy/mdio-mux-gpio.c
 create mode 100644 drivers/net/phy/mdio-mux.c
 create mode 100644 include/linux/mdio-mux.h

-- 
1.7.2.3

[PATCH v5 1/3] netdev/of/phy: New function: of_mdio_find_bus().

[David Daney]

From: David Daney <david.daney@cavium.com>

Add of_mdio_find_bus() which allows an mii_bus to be located given its
associated the device tree node.

This is needed by the follow-on patch to add a driver for MDIO bus
multiplexers.

The of_mdiobus_register() function is modified so that the device tree
node is recorded in the mii_bus.  Then we can find it again by
iterating over all mdio_bus_class devices.

Because the OF device tree has now become an integral part of the
kernel, this can live in mdio_bus.c (which contains the needed
mdio_bus_class structure) instead of of_mdio.c.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: "David S. Miller" <davem@davemloft.net>
---
 drivers/net/phy/mdio_bus.c |   32 ++++++++++++++++++++++++++++++++
 drivers/of/of_mdio.c       |    2 ++
 include/linux/of_mdio.h    |    2 ++
 3 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 8985cc6..83d5c9f 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -88,6 +88,38 @@ static struct class mdio_bus_class = {
 	.dev_release	= mdiobus_release,
 };
 
+#ifdef CONFIG_OF_MDIO
+/* Helper function for of_mdio_find_bus */
+static int of_mdio_bus_match(struct device *dev, void *mdio_bus_np)
+{
+	return dev->of_node == mdio_bus_np;
+}
+/**
+ * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
+ * @mdio_np: Pointer to the mii_bus.
+ *
+ * Returns a pointer to the mii_bus, or NULL if none found.
+ *
+ * Because the association of a device_node and mii_bus is made via
+ * of_mdiobus_register(), the mii_bus cannot be found before it is
+ * registered with of_mdiobus_register().
+ *
+ */
+struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
+{
+	struct device *d;
+
+	if (!mdio_bus_np)
+		return NULL;
+
+	d = class_find_device(&mdio_bus_class, NULL,  mdio_bus_np,
+			      of_mdio_bus_match);
+
+	return d ? to_mii_bus(d) : NULL;
+}
+EXPORT_SYMBOL(of_mdio_find_bus);
+#endif
+
 /**
  * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
  * @bus: target mii_bus
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 483c0ad..2574abd 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -45,6 +45,8 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 		for (i=0; i<PHY_MAX_ADDR; i++)
 			mdio->irq[i] = PHY_POLL;
 
+	mdio->dev.of_node = np;
+
 	/* Register the MDIO bus */
 	rc = mdiobus_register(mdio);
 	if (rc)
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 53b94e0..912c27a 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -22,4 +22,6 @@ extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
 					 void (*hndlr)(struct net_device *),
 					 phy_interface_t iface);
 
+extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
+
 #endif /* __LINUX_OF_MDIO_H */
-- 
1.7.2.3

[PATCH v5 2/3] netdev/of/phy: Add MDIO bus multiplexer support.

[David Daney]

From: David Daney <david.daney@cavium.com>

This patch adds a somewhat generic framework for MDIO bus
multiplexers.  It is modeled on the I2C multiplexer.

The multiplexer is needed if there are multiple PHYs with the same
address connected to the same MDIO bus adepter, or if there is
insufficient electrical drive capability for all the connected PHY
devices.

Conceptually it could look something like this:

                   ------------------
                   | Control Signal |
                   --------+---------
                           |
 ---------------   --------+------
 | MDIO MASTER |---| Multiplexer |
 ---------------   --+-------+----
                     |       |
                     C       C
                     h       h
                     i       i
                     l       l
                     d       d
                     |       |
     ---------       A       B   ---------
     |       |       |       |   |       |
     | PHY@1 +-------+       +---+ PHY@1 |
     |       |       |       |   |       |
     ---------       |       |   ---------
     ---------       |       |   ---------
     |       |       |       |   |       |
     | PHY@2 +-------+       +---+ PHY@2 |
     |       |                   |       |
     ---------                   ---------

This framework configures the bus topology from device tree data.  The
mechanics of switching the multiplexer is left to device specific
drivers.

The follow-on patch contains a multiplexer driven by GPIO lines.

Signed-off-by: David Daney <david.daney@cavium.com>
---
 Documentation/devicetree/bindings/net/mdio-mux.txt |  136 ++++++++++++++
 drivers/net/phy/Kconfig                            |    8 +
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/mdio-mux.c                         |  192 ++++++++++++++++++++
 include/linux/mdio-mux.h                           |   21 ++
 5 files changed, 358 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/mdio-mux.txt
 create mode 100644 drivers/net/phy/mdio-mux.c
 create mode 100644 include/linux/mdio-mux.h

diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
new file mode 100644
index 0000000..f65606f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
@@ -0,0 +1,136 @@
+Common MDIO bus multiplexer/switch properties.
+
+An MDIO bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner.  The nodes for an MDIO
+bus multiplexer/switch will have one child node for each child bus.
+
+Required properties:
+- mdio-parent-bus : phandle to the parent MDIO bus.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Other properties specific to the multiplexer/switch hardware.
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+
+Example :
+
+	/* The parent MDIO bus. */
+	smi1: mdio@1180000001900 {
+		compatible = "cavium,octeon-3860-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11800 0x00001900 0x0 0x40>;
+	};
+
+	/*
+	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
+	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
+	   PHYs each.
+	 */
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
+		mdio-parent-bus = <&smi1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy11: ethernet-phy@1 {
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy12: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy13: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy14: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+		};
+
+		mdio@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy21: ethernet-phy@1 {
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy22: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy23: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy24: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+		};
+	};
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 0e01f4e..222b06b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -135,6 +135,14 @@ config MDIO_OCTEON
 
 	  If in doubt, say Y.
 
+config MDIO_BUS_MUX
+	tristate
+	help
+	  This module provides a driver framework for MDIO bus
+	  multiplexers which connect one of several child MDIO busses
+	  to a parent bus.  Switching between child busses is done by
+	  device specific drivers.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index b7438b1..a6b50e7 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
+obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
new file mode 100644
index 0000000..39ea067
--- /dev/null
+++ b/drivers/net/phy/mdio-mux.c
@@ -0,0 +1,192 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mdio-mux.h>
+#include <linux/of_mdio.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "MDIO bus multiplexer driver"
+
+struct mdio_mux_child_bus;
+
+struct mdio_mux_parent_bus {
+	struct mii_bus *mii_bus;
+	int current_child;
+	int parent_id;
+	void *switch_data;
+	int (*switch_fn)(int current_child, int desired_child, void *data);
+
+	/* List of our children linked through their next fields. */
+	struct mdio_mux_child_bus *children;
+};
+
+struct mdio_mux_child_bus {
+	struct mii_bus *mii_bus;
+	struct mdio_mux_parent_bus *parent;
+	struct mdio_mux_child_bus *next;
+	int bus_number;
+	int phy_irq[PHY_MAX_ADDR];
+};
+
+/*
+ * The parent bus' lock is used to order access to the switch_fn.
+ */
+static int mdio_mux_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct mdio_mux_child_bus *cb = bus->priv;
+	struct mdio_mux_parent_bus *pb = cb->parent;
+	int r;
+
+	mutex_lock(&pb->mii_bus->mdio_lock);
+	r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
+	if (r)
+		goto out;
+
+	pb->current_child = cb->bus_number;
+
+	r = pb->mii_bus->read(pb->mii_bus, phy_id, regnum);
+out:
+	mutex_unlock(&pb->mii_bus->mdio_lock);
+
+	return r;
+}
+
+/*
+ * The parent bus' lock is used to order access to the switch_fn.
+ */
+static int mdio_mux_write(struct mii_bus *bus, int phy_id,
+			  int regnum, u16 val)
+{
+	struct mdio_mux_child_bus *cb = bus->priv;
+	struct mdio_mux_parent_bus *pb = cb->parent;
+
+	int r;
+
+	mutex_lock(&pb->mii_bus->mdio_lock);
+	r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
+	if (r)
+		goto out;
+
+	pb->current_child = cb->bus_number;
+
+	r = pb->mii_bus->write(pb->mii_bus, phy_id, regnum, val);
+out:
+	mutex_unlock(&pb->mii_bus->mdio_lock);
+
+	return r;
+}
+
+static int parent_count;
+
+int mdio_mux_init(struct device *dev,
+		  int (*switch_fn)(int cur, int desired, void *data),
+		  void **mux_handle,
+		  void *data)
+{
+	struct device_node *parent_bus_node;
+	struct device_node *child_bus_node;
+	int r, ret_val;
+	struct mii_bus *parent_bus;
+	struct mdio_mux_parent_bus *pb;
+	struct mdio_mux_child_bus *cb;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	parent_bus_node = of_parse_phandle(dev->of_node, "mdio-parent-bus", 0);
+
+	if (!parent_bus_node)
+		return -ENODEV;
+
+	parent_bus = of_mdio_find_bus(parent_bus_node);
+	if (parent_bus == NULL) {
+		ret_val = -EPROBE_DEFER;
+		goto err_parent_bus;
+	}
+
+	pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL);
+	if (pb == NULL) {
+		ret_val = -ENOMEM;
+		goto err_parent_bus;
+	}
+
+	pb->switch_data = data;
+	pb->switch_fn = switch_fn;
+	pb->current_child = -1;
+	pb->parent_id = parent_count++;
+	pb->mii_bus = parent_bus;
+
+	ret_val = -ENODEV;
+	for_each_child_of_node(dev->of_node, child_bus_node) {
+		u32 v;
+
+		r = of_property_read_u32(child_bus_node, "reg", &v);
+		if (r)
+			continue;
+
+		cb = devm_kzalloc(dev, sizeof(*cb), GFP_KERNEL);
+		if (cb == NULL) {
+			dev_err(dev,
+				"Error: Failed to allocate memory for child\n");
+			ret_val = -ENOMEM;
+			break;
+		}
+		cb->bus_number = v;
+		cb->parent = pb;
+		cb->mii_bus = mdiobus_alloc();
+		cb->mii_bus->priv = cb;
+
+		cb->mii_bus->irq = cb->phy_irq;
+		cb->mii_bus->name = "mdio_mux";
+		snprintf(cb->mii_bus->id, MII_BUS_ID_SIZE, "%x.%x",
+			 pb->parent_id, v);
+		cb->mii_bus->parent = dev;
+		cb->mii_bus->read = mdio_mux_read;
+		cb->mii_bus->write = mdio_mux_write;
+		r = of_mdiobus_register(cb->mii_bus, child_bus_node);
+		if (r) {
+			mdiobus_free(cb->mii_bus);
+			devm_kfree(dev, cb);
+		} else {
+			of_node_get(child_bus_node);
+			cb->next = pb->children;
+			pb->children = cb;
+		}
+	}
+	if (pb->children) {
+		*mux_handle = pb;
+		dev_info(dev, "Version " DRV_VERSION "\n");
+		return 0;
+	}
+err_parent_bus:
+	of_node_put(parent_bus_node);
+	return ret_val;
+}
+EXPORT_SYMBOL_GPL(mdio_mux_init);
+
+void mdio_mux_uninit(void *mux_handle)
+{
+	struct mdio_mux_parent_bus *pb = mux_handle;
+	struct mdio_mux_child_bus *cb = pb->children;
+
+	while (cb) {
+		mdiobus_unregister(cb->mii_bus);
+		mdiobus_free(cb->mii_bus);
+		cb = cb->next;
+	}
+}
+EXPORT_SYMBOL_GPL(mdio_mux_uninit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mdio-mux.h b/include/linux/mdio-mux.h
new file mode 100644
index 0000000..a243dbb
--- /dev/null
+++ b/include/linux/mdio-mux.h
@@ -0,0 +1,21 @@
+/*
+ * MDIO bus multiplexer framwork.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+#ifndef __LINUX_MDIO_MUX_H
+#define __LINUX_MDIO_MUX_H
+#include <linux/device.h>
+
+int mdio_mux_init(struct device *dev,
+		  int (*switch_fn) (int cur, int desired, void *data),
+		  void **mux_handle,
+		  void *data);
+
+void mdio_mux_uninit(void *mux_handle);
+
+#endif /* __LINUX_MDIO_MUX_H */
-- 
1.7.2.3

[PATCH v5 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.

[David Daney]

From: David Daney <david.daney@cavium.com>

The GPIO pins select which sub bus is connected to the master.

Initially tested with an sn74cbtlv3253 switch device wired into the
MDIO bus.

Signed-off-by: David Daney <david.daney@cavium.com>
---
 .../devicetree/bindings/net/mdio-mux-gpio.txt      |  127 +++++++++++++++++
 drivers/net/phy/Kconfig                            |   10 ++
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/mdio-mux-gpio.c                    |  142 ++++++++++++++++++++
 4 files changed, 280 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
 create mode 100644 drivers/net/phy/mdio-mux-gpio.c

diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
new file mode 100644
index 0000000..7938411
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
@@ -0,0 +1,127 @@
+Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
+
+This is a special case of a MDIO bus multiplexer.  One or more GPIO
+lines are used to control which child bus is connected.
+
+Required properties in addition to the generic multiplexer properties:
+
+- compatible : mdio-mux-gpio.
+- gpios : GPIO specifiers for each GPIO line.  One or more must be specified.
+
+
+Example :
+
+	/* The parent MDIO bus. */
+	smi1: mdio@1180000001900 {
+		compatible = "cavium,octeon-3860-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11800 0x00001900 0x0 0x40>;
+	};
+
+	/*
+	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
+	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
+	   PHYs each.
+	 */
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
+		mdio-parent-bus = <&smi1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy11: ethernet-phy@1 {
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy12: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy13: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+			phy14: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <10 8>; /* Pin 10, active low */
+			};
+		};
+
+		mdio@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy21: ethernet-phy@1 {
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy22: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy23: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy24: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+		};
+	};
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 222b06b..32e9be0 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -143,6 +143,16 @@ config MDIO_BUS_MUX
 	  to a parent bus.  Switching between child busses is done by
 	  device specific drivers.
 
+config MDIO_BUS_MUX_GPIO
+	tristate "Support for GPIO controlled MDIO bus multiplexers"
+	depends on OF_GPIO && OF_MDIO
+	select MDIO_BUS_MUX
+	help
+	  This module provides a driver for MDIO bus multiplexers that
+	  are controlled via GPIO lines.  The multiplexer connects one of
+	  several child MDIO busses to a parent bus.  Child bus
+	  selection is under the control of GPIO lines.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a6b50e7..f51af68 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
new file mode 100644
index 0000000..e0cc4ef
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -0,0 +1,142 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+#include <linux/of_gpio.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
+
+#define MDIO_MUX_GPIO_MAX_BITS 8
+
+struct mdio_mux_gpio_state {
+	int gpio[MDIO_MUX_GPIO_MAX_BITS];
+	unsigned int num_gpios;
+	void *mux_handle;
+};
+
+static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
+				   void *data)
+{
+	int change;
+	unsigned int n;
+	struct mdio_mux_gpio_state *s = data;
+
+	if (current_child == desired_child)
+		return 0;
+
+	change = current_child == -1 ? -1 : current_child ^ desired_child;
+
+	for (n = 0; n < s->num_gpios; n++) {
+		if (change & 1)
+			gpio_set_value_cansleep(s->gpio[n],
+						(desired_child & 1) != 0);
+		change >>= 1;
+		desired_child >>= 1;
+	}
+
+	return 0;
+}
+
+static int __devinit mdio_mux_gpio_probe(struct platform_device *pdev)
+{
+	enum of_gpio_flags f;
+	struct mdio_mux_gpio_state *s;
+	unsigned int num_gpios;
+	unsigned int n;
+	int r;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	num_gpios = of_gpio_count(pdev->dev.of_node);
+	if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
+		return -ENODEV;
+
+	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	s->num_gpios = num_gpios;
+
+	for (n = 0; n < num_gpios; ) {
+		int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
+		if (gpio < 0) {
+			r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
+			goto err;
+		}
+		s->gpio[n] = gpio;
+
+		n++;
+
+		r = gpio_request(gpio, "mdio_mux_gpio");
+		if (r)
+			goto err;
+
+		r = gpio_direction_output(gpio, 0);
+		if (r)
+			goto err;
+	}
+
+	r = mdio_mux_init(&pdev->dev,
+			  mdio_mux_gpio_switch_fn, &s->mux_handle, s);
+
+	if (r == 0) {
+		pdev->dev.platform_data = s;
+		return 0;
+	}
+err:
+	while (n) {
+		n--;
+		gpio_free(s->gpio[n]);
+	}
+	devm_kfree(&pdev->dev, s);
+	return r;
+}
+
+static int __devexit mdio_mux_gpio_remove(struct platform_device *pdev)
+{
+	struct mdio_mux_gpio_state *s = pdev->dev.platform_data;
+	mdio_mux_uninit(s->mux_handle);
+	return 0;
+}
+
+static struct of_device_id mdio_mux_gpio_match[] = {
+	{
+		.compatible = "mdio-mux-gpio",
+	},
+	{
+		/* Legacy compatible property. */
+		.compatible = "cavium,mdio-mux-sn74cbtlv3253",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_gpio_match);
+
+static struct platform_driver mdio_mux_gpio_driver = {
+	.driver = {
+		.name		= "mdio-mux-gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table = mdio_mux_gpio_match,
+	},
+	.probe		= mdio_mux_gpio_probe,
+	.remove		= __devexit_p(mdio_mux_gpio_remove),
+};
+
+module_platform_driver(mdio_mux_gpio_driver);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
-- 
1.7.2.3

Re: [PATCH v5 2/3] netdev/of/phy: Add MDIO bus multiplexer support.

[David Miller]

From: David Daney <ddaney.cavm@gmail.com>
Date: Wed, 18 Apr 2012 16:20:53 -0700

> +config MDIO_BUS_MUX
> +	tristate
> +	help
> +	  This module provides a driver framework for MDIO bus
> +	  multiplexers which connect one of several child MDIO busses
> +	  to a parent bus.  Switching between child busses is done by
> +	  device specific drivers.
> +

This driver uses OF and OF_MDIO, and therefore need dependencies upon
them.  Otherwise it can be enabled in configurations which will result
in build failures.

Re: [PATCH v5 2/3] netdev/of/phy: Add MDIO bus multiplexer support.

[David Daney]

On 04/21/2012 12:32 PM, David Miller wrote:
> From: David Daney<ddaney.cavm@gmail.com>
> Date: Wed, 18 Apr 2012 16:20:53 -0700
>
>> +config MDIO_BUS_MUX
>> +	tristate
>> +	help
>> +	  This module provides a driver framework for MDIO bus
>> +	  multiplexers which connect one of several child MDIO busses
>> +	  to a parent bus.  Switching between child busses is done by
>> +	  device specific drivers.
>> +
> This driver uses OF and OF_MDIO, and therefore need dependencies upon
> them.  Otherwise it can be enabled in configurations which will result
> in build failures.

Note that this symbol cannot be selected by the user, only indirectly 
via the MDIO_BUS_MUX_GPIO symbol (in patch 3/3) which has the proper 
dependencies.

If we were to specify the dependencies in both places, we gain nothing other than duplication of information.

However, if you insist, I will of course add it here too.

David Daney

Re: [PATCH v5 2/3] netdev/of/phy: Add MDIO bus multiplexer support.

[David Miller]

From: David Daney <david.s.daney@gmail.com>
Date: Sat, 21 Apr 2012 14:25:51 -0700

> If we were to specify the dependencies in both places, we gain nothing
> other than duplication of information.

Each Kconfig option enabling a module has to have appropriate
dependencies.

Re: [PATCH v5 2/3] netdev/of/phy: Add MDIO bus multiplexer support.

[David Daney]

On 04/21/2012 04:03 PM, David Miller wrote:
> From: David Daney<david.s.daney@gmail.com>
> Date: Sat, 21 Apr 2012 14:25:51 -0700
>
>> If we were to specify the dependencies in both places, we gain nothing
>> other than duplication of information.
>
> Each Kconfig option enabling a module has to have appropriate
> dependencies.
>
I will send a revised patch set.

Thanks,
David Daney