From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756439Ab2EHS2W (ORCPT ); Tue, 8 May 2012 14:28:22 -0400 Received: from mga01.intel.com ([192.55.52.88]:1552 "EHLO mga01.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754960Ab2EHSXR (ORCPT ); Tue, 8 May 2012 14:23:17 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.71,315,1320652800"; d="scan'208";a="150636976" From: Jarkko Sakkinen To: linux-kernel@vger.kernel.org Cc: linux-kbuild@vger.kernel.org, Michal Marek , Sam Ravnborg , Joseph Cihula , Shane Wang , hpa@linux.intel.com, Jarkko Sakkinen Subject: [PATCH 04/23] x86, realmode: Move reboot_32.S to unified realmode code Date: Tue, 8 May 2012 21:22:27 +0300 Message-Id: <1336501366-28617-5-git-send-email-jarkko.sakkinen@intel.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1336501366-28617-1-git-send-email-jarkko.sakkinen@intel.com> References: <1336501366-28617-1-git-send-email-jarkko.sakkinen@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Migrated reboot_32.S from x86_trampoline to the real-mode blob. Signed-off-by: Jarkko Sakkinen --- arch/x86/include/asm/realmode.h | 4 ++ arch/x86/kernel/Makefile | 1 - arch/x86/kernel/reboot.c | 25 +------ arch/x86/kernel/reboot_32.S | 135 -------------------------------------- arch/x86/realmode/rm/Makefile | 1 + arch/x86/realmode/rm/header.S | 3 + arch/x86/realmode/rm/reboot_32.S | 134 +++++++++++++++++++++++++++++++++++++ 7 files changed, 145 insertions(+), 158 deletions(-) delete mode 100644 arch/x86/kernel/reboot_32.S create mode 100644 arch/x86/realmode/rm/reboot_32.S diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index dc1bba5..bf26b06 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -9,6 +9,10 @@ struct real_mode_header { u32 text_start; u32 ro_end; u32 end; + /* reboot */ +#ifdef CONFIG_X86_32 + u32 machine_real_restart_asm; +#endif } __attribute__((__packed__)); extern struct real_mode_header real_mode_header; diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f9e19d4..b71ef35 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ obj-y += acpi/ obj-y += reboot.o -obj-$(CONFIG_X86_32) += reboot_32.o obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d840e69..050eff2 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -24,6 +24,7 @@ #ifdef CONFIG_X86_32 # include # include +# include #else # include #endif @@ -332,15 +333,10 @@ static int __init reboot_init(void) } core_initcall(reboot_init); -extern const unsigned char machine_real_restart_asm[]; -extern const u64 machine_real_restart_gdt[3]; - void machine_real_restart(unsigned int type) { - void *restart_va; - unsigned long restart_pa; - void (*restart_lowmem)(unsigned int); - u64 *lowmem_gdt; + void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int)) + real_mode_header.machine_real_restart_asm; local_irq_disable(); @@ -369,21 +365,6 @@ void machine_real_restart(unsigned int type) too. */ *((unsigned short *)0x472) = reboot_mode; - /* Patch the GDT in the low memory trampoline */ - lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); - - restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); - restart_pa = virt_to_phys(restart_va); - restart_lowmem = (void (*)(unsigned int))restart_pa; - - /* GDT[0]: GDT self-pointer */ - lowmem_gdt[0] = - (u64)(sizeof(machine_real_restart_gdt) - 1) + - ((u64)virt_to_phys(lowmem_gdt) << 16); - /* GDT[1]: 64K real mode code segment */ - lowmem_gdt[1] = - GDT_ENTRY(0x009b, restart_pa, 0xffff); - /* Jump to the identity-mapped low memory code */ restart_lowmem(type); } diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S deleted file mode 100644 index 1d5c46d..0000000 --- a/arch/x86/kernel/reboot_32.S +++ /dev/null @@ -1,135 +0,0 @@ -#include -#include -#include -#include - -/* - * The following code and data reboots the machine by switching to real - * mode and jumping to the BIOS reset entry point, as if the CPU has - * really been reset. The previous version asked the keyboard - * controller to pulse the CPU reset line, which is more thorough, but - * doesn't work with at least one type of 486 motherboard. It is easy - * to stop this code working; hence the copious comments. - * - * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. - */ - .section ".x86_trampoline","a" - .balign 16 - .code32 -ENTRY(machine_real_restart_asm) -r_base = . - /* Get our own relocated address */ - call 1f -1: popl %ebx - subl $(1b - r_base), %ebx - - /* Compute the equivalent real-mode segment */ - movl %ebx, %ecx - shrl $4, %ecx - - /* Patch post-real-mode segment jump */ - movw (dispatch_table - r_base)(%ebx,%eax,2),%ax - movw %ax, (101f - r_base)(%ebx) - movw %cx, (102f - r_base)(%ebx) - - /* Set up the IDT for real mode. */ - lidtl (machine_real_restart_idt - r_base)(%ebx) - - /* - * Set up a GDT from which we can load segment descriptors for real - * mode. The GDT is not used in real mode; it is just needed here to - * prepare the descriptors. - */ - lgdtl (machine_real_restart_gdt - r_base)(%ebx) - - /* - * Load the data segment registers with 16-bit compatible values - */ - movl $16, %ecx - movl %ecx, %ds - movl %ecx, %es - movl %ecx, %fs - movl %ecx, %gs - movl %ecx, %ss - ljmpl $8, $1f - r_base - -/* - * This is 16-bit protected mode code to disable paging and the cache, - * switch to real mode and jump to the BIOS reset code. - * - * The instruction that switches to real mode by writing to CR0 must be - * followed immediately by a far jump instruction, which set CS to a - * valid value for real mode, and flushes the prefetch queue to avoid - * running instructions that have already been decoded in protected - * mode. - * - * Clears all the flags except ET, especially PG (paging), PE - * (protected-mode enable) and TS (task switch for coprocessor state - * save). Flushes the TLB after paging has been disabled. Sets CD and - * NW, to disable the cache on a 486, and invalidates the cache. This - * is more like the state of a 486 after reset. I don't know if - * something else should be done for other chips. - * - * More could be done here to set up the registers as if a CPU reset had - * occurred; hopefully real BIOSs don't assume much. This is not the - * actual BIOS entry point, anyway (that is at 0xfffffff0). - * - * Most of this work is probably excessive, but it is what is tested. - */ - .code16 -1: - xorl %ecx, %ecx - movl %cr0, %eax - andl $0x00000011, %eax - orl $0x60000000, %eax - movl %eax, %cr0 - movl %ecx, %cr3 - movl %cr0, %edx - andl $0x60000000, %edx /* If no cache bits -> no wbinvd */ - jz 2f - wbinvd -2: - andb $0x10, %al - movl %eax, %cr0 - .byte 0xea /* ljmpw */ -101: .word 0 /* Offset */ -102: .word 0 /* Segment */ - -bios: - ljmpw $0xf000, $0xfff0 - -apm: - movw $0x1000, %ax - movw %ax, %ss - movw $0xf000, %sp - movw $0x5307, %ax - movw $0x0001, %bx - movw $0x0003, %cx - int $0x15 - -END(machine_real_restart_asm) - - .balign 16 - /* These must match +#include +#include +#include + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + * + * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. + */ + .section ".text32", "ax" + .code32 + .globl machine_real_restart_asm + + .balign 16 +machine_real_restart_asm: + /* Set up the IDT for real mode. */ + lidtl pa_machine_real_restart_idt + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + lgdtl pa_machine_real_restart_gdt + + /* + * Load the data segment registers with 16-bit compatible values + */ + movl $16, %ecx + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + ljmpw $8, $1f + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. This is not the + * actual BIOS entry point, anyway (that is at 0xfffffff0). + * + * Most of this work is probably excessive, but it is what is tested. + */ + .text + .code16 + + .balign 16 +machine_real_restart_asm16: +1: + xorl %ecx, %ecx + movl %cr0, %edx + andl $0x00000011, %edx + orl $0x60000000, %edx + movl %edx, %cr0 + movl %ecx, %cr3 + movl %cr0, %edx + andl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + jz 2f + wbinvd +2: + andb $0x10, %dl + movl %edx, %cr0 + .byte 0xea /* ljmpw */ + .word 3f /* Offset */ + .word real_mode_seg /* Segment */ + +3: + testb $0, %al + jz bios + +apm: + movw $0x1000, %ax + movw %ax, %ss + movw $0xf000, %sp + movw $0x5307, %ax + movw $0x0001, %bx + movw $0x0003, %cx + int $0x15 + /* This should never return... */ + +bios: + ljmpw $0xf000, $0xfff0 + + .section ".rodata", "a" + .globl machine_real_restart_idt, machine_real_restart_gdt + + .balign 16 +machine_real_restart_idt: + .word 0xffff /* Length - real mode default value */ + .long 0 /* Base - real mode default value */ + + .balign 16 +machine_real_restart_gdt: + /* Self-pointer */ + .word 0xffff /* Length - real mode default value */ + .long pa_machine_real_restart_gdt + .word 0 + + /* + * 16-bit code segment pointing to real_mode_seg + * Selector value 8 + */ + .word 0xffff /* Limit */ + .long 0x9b000000 + pa_real_mode_base + .word 0 + + /* + * 16-bit data segment with the selector value 16 = 0x10 and + * base value 0x100; since this is consistent with real mode + * semantics we don't have to reload the segments once CR0.PE = 0. + */ + .quad GDT_ENTRY(0x0093, 0x100, 0xffff) -- 1.7.9.5