linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
	Ingo Molnar <mingo@kernel.org>,
	Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Prarit Bhargava <prarit@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Zhouping Liu <zliu@redhat.com>, CAI Qian <caiqian@redhat.com>,
	Sasha Levin <levinsasha928@gmail.com>,
	stable@vger.kernel.org
Subject: [PATCH] time: Improve sanity checking of timekeeping inputs
Date: Wed,  8 Aug 2012 15:36:20 -0400	[thread overview]
Message-ID: <1344454580-17031-1-git-send-email-john.stultz@linaro.org> (raw)

Thomas, Ingo,
	Here's a fix against tip/timers/urgent that addresses
timekeeping edge cases detected by both a bad BIOS and system
fuzzing w/ trinity. Thanks to Sasha Levin and CAI Qian for
finding and reporting these!

Let me know if you have any tweaks you want to see.

thanks
-john

Unexpected behavior could occur if the time is set to
a value large enough to overflow a 64bit ktime_t
(which is something larger then the year 2262).

Also unexpected behavior could occur if large negative
offsets are injected via adjtimex.

So this patch improves the sanity check timekeeping inputs
by improving the timespec_valid() check, and then makes better
use of timespec_valid() to make sure we don't set the time to
an invalid negative value or one that overflows ktime_t.

Note: This does not protect from setting the time close to
overflowing ktime_t and then letting natural accumulation
cause the overflow.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: CAI Qian <caiqian@redhat.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 include/linux/ktime.h     |    7 -------
 include/linux/time.h      |   22 ++++++++++++++++++++--
 kernel/time/timekeeping.c |   26 ++++++++++++++++++++++++--
 3 files changed, 44 insertions(+), 11 deletions(-)

diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index 603bec2..06177ba10 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -58,13 +58,6 @@ union ktime {
 
 typedef union ktime ktime_t;		/* Kill this */
 
-#define KTIME_MAX			((s64)~((u64)1 << 63))
-#if (BITS_PER_LONG == 64)
-# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
-#else
-# define KTIME_SEC_MAX			LONG_MAX
-#endif
-
 /*
  * ktime_t definitions when using the 64-bit scalar representation:
  */
diff --git a/include/linux/time.h b/include/linux/time.h
index c81c5e4..b0bbd8f 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -107,11 +107,29 @@ static inline struct timespec timespec_sub(struct timespec lhs,
 	return ts_delta;
 }
 
+#define KTIME_MAX			((s64)~((u64)1 << 63))
+#if (BITS_PER_LONG == 64)
+# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
+#else
+# define KTIME_SEC_MAX			LONG_MAX
+#endif
+
 /*
  * Returns true if the timespec is norm, false if denorm:
  */
-#define timespec_valid(ts) \
-	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
+static inline bool timespec_valid(const struct timespec *ts)
+{
+	/* Dates before 1970 are bogus */
+	if (ts->tv_sec < 0)
+		return false;
+	/* Can't have more nanoseconds then a second */
+	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
+		return false;
+	/* Disallow values that could overflow ktime_t */
+	if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
+		return false;
+	return true;
+}
 
 extern void read_persistent_clock(struct timespec *ts);
 extern void read_boot_clock(struct timespec *ts);
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e16af19..898bef0 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -427,7 +427,7 @@ int do_settimeofday(const struct timespec *tv)
 	struct timespec ts_delta, xt;
 	unsigned long flags;
 
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+	if (!timespec_valid(tv))
 		return -EINVAL;
 
 	write_seqlock_irqsave(&tk->lock, flags);
@@ -463,6 +463,8 @@ int timekeeping_inject_offset(struct timespec *ts)
 {
 	struct timekeeper *tk = &timekeeper;
 	unsigned long flags;
+	struct timespec tmp;
+	int ret = 0;
 
 	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
 		return -EINVAL;
@@ -471,10 +473,17 @@ int timekeeping_inject_offset(struct timespec *ts)
 
 	timekeeping_forward_now(tk);
 
+	/* Make sure the proposed value is valid */
+	tmp = timespec_add(tk_xtime(tk),  *ts);
+	if (!timespec_valid(&tmp)) {
+		ret = -EINVAL;
+		goto error;
+	}
 
 	tk_xtime_add(tk, ts);
 	tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts));
 
+error: /* even if we error out, we forwarded the time, so call update */
 	timekeeping_update(tk, true);
 
 	write_sequnlock_irqrestore(&tk->lock, flags);
@@ -482,7 +491,7 @@ int timekeeping_inject_offset(struct timespec *ts)
 	/* signal hrtimers about time change */
 	clock_was_set();
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(timekeeping_inject_offset);
 
@@ -649,7 +658,20 @@ void __init timekeeping_init(void)
 	struct timespec now, boot, tmp;
 
 	read_persistent_clock(&now);
+	if (!timespec_valid(&now)) {
+		pr_warn("WARNING: Persistent clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		now.tv_sec = 0;
+		now.tv_nsec = 0;
+	}
+
 	read_boot_clock(&boot);
+	if (!timespec_valid(&boot)) {
+		pr_warn("WARNING: Boot clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		boot.tv_sec = 0;
+		boot.tv_nsec = 0;
+	}
 
 	seqlock_init(&tk->lock);
 
-- 
1.7.9.5


             reply	other threads:[~2012-08-08 19:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-08 19:36 John Stultz [this message]
2012-08-15 11:39 ` [PATCH] time: Improve sanity checking of timekeeping inputs Josh Boyer
2012-08-15 14:04 ` [tip:timers/urgent] " tip-bot for John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344454580-17031-1-git-send-email-john.stultz@linaro.org \
    --to=john.stultz@linaro.org \
    --cc=a.p.zijlstra@chello.nl \
    --cc=caiqian@redhat.com \
    --cc=levinsasha928@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=prarit@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=zliu@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).