From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752068Ab2HLOwq (ORCPT ); Sun, 12 Aug 2012 10:52:46 -0400 Received: from mail-we0-f174.google.com ([74.125.82.174]:64623 "EHLO mail-we0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751041Ab2HLOwl (ORCPT ); Sun, 12 Aug 2012 10:52:41 -0400 From: David Herrmann To: linux-fbdev@vger.kernel.org Cc: Florian Tobias Schandinat , Greg Kroah-Hartman , linux-serial@vger.kernel.org, Alan Cox , linux-kernel@vger.kernel.org, Geert Uytterhoeven , David Herrmann Subject: [PATCH 07/11] fblog: allow selecting fbs via sysfs and module-parameters Date: Sun, 12 Aug 2012 16:53:21 +0200 Message-Id: <1344783205-2384-8-git-send-email-dh.herrmann@googlemail.com> X-Mailer: git-send-email 1.7.11.4 In-Reply-To: <1344783205-2384-1-git-send-email-dh.herrmann@googlemail.com> References: <1344783205-2384-1-git-send-email-dh.herrmann@googlemail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org fblog is mainly useful during boot, reboot, panics and maintenance. In all cases you often want to control which monitors are used for console output. Moreover, in multi-seat environments it is desireable to reduce system-overhead by not drawing the console to all framebuffers. Four mechanisms to select framebuffers for fblog are added: 1) "active" module parameter: This parameter selects whether fblog has access to available framebuffer devices. If it is true, then fblog will open devices following the rules described below and rendering will take place. If it is false, new hotplugged devices will not be activated and no more rendering to currently active devices takes place. However, active devices will continue rendering after this is set to true again. 2) "active" sysfs attribute for each fblog object. Reading this value returns whether a framebuffer is currently active. Writing it opens/closes the framebuffer. This allows runtime control which fbs are used. For instance, init can set these to 0 after bootup. Note that a framebuffer is only active if this is 1 _and_ the "active" module parameter is set to "true". 3) "activate_on_hotplug" module parameter: This selects whether a device is activated by default when hotplugged. This is true by default so new devices will be automatically activated. 4) "main_only" module parameter: This selects what devices are activated on hotplug. This has no effect if "activate_on_hotplug" is false. Otherwise, if this is true then only fb0 will be activated on hotplug. This is false by default. Signed-off-by: David Herrmann --- drivers/video/console/fblog.c | 66 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c index 1c526c5..aed77dc 100644 --- a/drivers/video/console/fblog.c +++ b/drivers/video/console/fblog.c @@ -44,6 +44,9 @@ struct fblog_fb { static DEFINE_MUTEX(fblog_registration_lock); static struct fblog_fb *fblog_fbs[FB_MAX]; +static bool active = true; +static bool activate_on_hotplug = true; +static bool main_only = false; #define to_fblog_dev(_d) container_of(_d, struct fblog_fb, dev) @@ -63,6 +66,9 @@ static int fblog_open(struct fblog_fb *fb) { int ret; + if (!active) + return -EPERM; + mutex_lock(&fb->lock); if (test_bit(FBLOG_KILLED, &fb->flags)) { @@ -115,6 +121,40 @@ static void fblog_close(struct fblog_fb *fb, bool kill_dev) mutex_unlock(&fb->lock); } +static ssize_t fblog_dev_active_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct fblog_fb *fb = to_fblog_dev(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", + !!test_bit(FBLOG_OPEN, &fb->flags)); +} + +static ssize_t fblog_dev_active_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct fblog_fb *fb = to_fblog_dev(dev); + unsigned long num; + int ret = 0; + + num = simple_strtoul(buf, NULL, 10); + + mutex_lock(&fb->info->lock); + if (num) + ret = fblog_open(fb); + else + fblog_close(fb, false); + mutex_unlock(&fb->info->lock); + + return ret ? ret : count; +} + +static DEVICE_ATTR(active, S_IRUGO | S_IWUSR | S_IWGRP, fblog_dev_active_show, + fblog_dev_active_store); + /* * fblog framebuffer list * The fblog_fbs[] array contains all currently registered framebuffers. If a @@ -148,6 +188,7 @@ static void fblog_do_unregister(struct fb_info *info) fblog_fbs[info->node] = NULL; fblog_close(fb, true); + device_remove_file(&fb->dev, &dev_attr_active); device_del(&fb->dev); put_device(&fb->dev); } @@ -156,6 +197,7 @@ static void fblog_do_register(struct fb_info *info, bool force) { struct fblog_fb *fb; int ret; + bool do_open = true; fb = fblog_fbs[info->node]; if (fb && fb->info != info) { @@ -186,7 +228,20 @@ static void fblog_do_register(struct fb_info *info, bool force) return; } - fblog_open(fb); + ret = device_create_file(&fb->dev, &dev_attr_active); + if (ret) { + pr_err("fblog: cannot create sysfs entry"); + /* do not open fb if we cannot create control file */ + do_open = false; + } + + if (!activate_on_hotplug) + do_open = false; + if (main_only && info->node != 0) + do_open = false; + + if (do_open) + fblog_open(fb); } static void fblog_register(struct fb_info *info, bool force) @@ -321,6 +376,15 @@ static void __exit fblog_exit(void) } } +module_param(active, bool, S_IRUGO | S_IWUSR | S_IWGRP); +MODULE_PARM_DESC(active, "Activate fblog rendering"); + +module_param(activate_on_hotplug, bool, S_IRUGO | S_IWUSR | S_IWGRP); +MODULE_PARM_DESC(activate_on_hotplug, "Activate fblog on hotplugged devices"); + +module_param(main_only, bool, S_IRUGO); +MODULE_PARM_DESC(main_only, "Activate fblog by default only on main devices"); + module_init(fblog_init); module_exit(fblog_exit); MODULE_LICENSE("GPL"); -- 1.7.11.4