From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756952Ab2HOTv7 (ORCPT ); Wed, 15 Aug 2012 15:51:59 -0400 Received: from mail1.windriver.com ([147.11.146.13]:63035 "EHLO mail1.windriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756930Ab2HOTvy (ORCPT ); Wed, 15 Aug 2012 15:51:54 -0400 From: Paul Gortmaker To: , CC: John Stultz , Sasha Levin , Thomas Gleixner , Prarit Bhargava , Paul Gortmaker Subject: [v2.6.34-stable 109/165] ntp: Fix leap-second hrtimer livelock Date: Wed, 15 Aug 2012 15:47:33 -0400 Message-ID: <1345060109-9187-110-git-send-email-paul.gortmaker@windriver.com> X-Mailer: git-send-email 1.7.12.rc2 In-Reply-To: <1345060109-9187-1-git-send-email-paul.gortmaker@windriver.com> References: <1345060109-9187-1-git-send-email-paul.gortmaker@windriver.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: John Stultz ------------------- This is a commit scheduled for the next v2.6.34 longterm release. http://git.kernel.org/?p=linux/kernel/git/paulg/longterm-queue-2.6.34.git If you see a problem with using this for longterm, please comment. ------------------- commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d upstream. This should have been backported when it was commited, but I mistook the problem as requiring the ntp_lock changes that landed in 3.4 in order for it to occur. Unfortunately the same issue can happen (with only one cpu) as follows: do_adjtimex() write_seqlock_irq(&xtime_lock); process_adjtimex_modes() process_adj_status() ntp_start_leap_timer() hrtimer_start() hrtimer_reprogram() tick_program_event() clockevents_program_event() ktime_get() seq = req_seqbegin(xtime_lock); [DEADLOCK] This deadlock will no always occur, as it requires the leap_timer to force a hrtimer_reprogram which only happens if its set and there's no sooner timer to expire. NOTE: This patch, being faithful to the original commit, introduces a bug (we don't update wall_to_monotonic), which will be resovled by backporting a following fix. Original commit message below: Since commit 7dffa3c673fbcf835cd7be80bb4aec8ad3f51168 the ntp subsystem has used an hrtimer for triggering the leapsecond adjustment. However, this can cause a potential livelock. Thomas diagnosed this as the following pattern: CPU 0 CPU 1 do_adjtimex() spin_lock_irq(&ntp_lock); process_adjtimex_modes(); timer_interrupt() process_adj_status(); do_timer() ntp_start_leap_timer(); write_lock(&xtime_lock); hrtimer_start(); update_wall_time(); hrtimer_reprogram(); ntp_tick_length() tick_program_event() spin_lock(&ntp_lock); clockevents_program_event() ktime_get() seq = req_seqbegin(xtime_lock); This patch tries to avoid the problem by reverting back to not using an hrtimer to inject leapseconds, and instead we handle the leapsecond processing in the second_overflow() function. The downside to this change is that on systems that support highres timers, the leap second processing will occur on a HZ tick boundary, (ie: ~1-10ms, depending on HZ) after the leap second instead of possibly sooner (~34us in my tests w/ x86_64 lapic). This patch applies on top of tip/timers/core. CC: Sasha Levin CC: Thomas Gleixner Reported-by: Sasha Levin Diagnoised-by: Thomas Gleixner Tested-by: Sasha Levin Cc: Prarit Bhargava Cc: Thomas Gleixner Cc: Linux Kernel Signed-off-by: John Stultz Signed-off-by: Paul Gortmaker --- include/linux/timex.h | 2 +- kernel/time/ntp.c | 122 +++++++++++++++------------------------------- kernel/time/timekeeping.c | 12 ++--- 3 files changed, 44 insertions(+), 92 deletions(-) diff --git a/include/linux/timex.h b/include/linux/timex.h index 7a082b3..5674a08 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -267,7 +267,7 @@ static inline int ntp_synced(void) /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ extern u64 tick_length; -extern void second_overflow(void); +extern int second_overflow(unsigned long secs); extern void update_ntp_one_tick(void); extern int do_adjtimex(struct timex *); diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 7c0f180..2522ab8 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -28,8 +28,6 @@ unsigned long tick_nsec; u64 tick_length; static u64 tick_length_base; -static struct hrtimer leap_timer; - #define MAX_TICKADJ 500LL /* usecs */ #define MAX_TICKADJ_SCALED \ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ) @@ -180,60 +178,60 @@ void ntp_clear(void) } /* - * Leap second processing. If in leap-insert state at the end of the - * day, the system clock is set back one second; if in leap-delete - * state, the system clock is set ahead one second. + * this routine handles the overflow of the microsecond field + * + * The tricky bits of code to handle the accurate clock support + * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. + * They were originally developed for SUN and DEC kernels. + * All the kudos should go to Dave for this stuff. + * + * Also handles leap second processing, and returns leap offset */ -static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) +int second_overflow(unsigned long secs) { - enum hrtimer_restart res = HRTIMER_NORESTART; - - write_seqlock(&xtime_lock); + int leap = 0; + s64 delta; + /* + * Leap second processing. If in leap-insert state at the end of the + * day, the system clock is set back one second; if in leap-delete + * state, the system clock is set ahead one second. + */ switch (time_state) { case TIME_OK: + if (time_status & STA_INS) + time_state = TIME_INS; + else if (time_status & STA_DEL) + time_state = TIME_DEL; break; case TIME_INS: - timekeeping_leap_insert(-1); - time_state = TIME_OOP; - printk(KERN_NOTICE - "Clock: inserting leap second 23:59:60 UTC\n"); - hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC); - res = HRTIMER_RESTART; + if (secs % 86400 == 0) { + leap = -1; + time_state = TIME_OOP; + printk(KERN_NOTICE + "Clock: inserting leap second 23:59:60 UTC\n"); + } break; case TIME_DEL: - timekeeping_leap_insert(1); - time_tai--; - time_state = TIME_WAIT; - printk(KERN_NOTICE - "Clock: deleting leap second 23:59:59 UTC\n"); + if ((secs + 1) % 86400 == 0) { + leap = 1; + time_tai--; + time_state = TIME_WAIT; + printk(KERN_NOTICE + "Clock: deleting leap second 23:59:59 UTC\n"); + } break; case TIME_OOP: time_tai++; time_state = TIME_WAIT; - /* fall through */ + break; + case TIME_WAIT: if (!(time_status & (STA_INS | STA_DEL))) time_state = TIME_OK; break; } - write_sequnlock(&xtime_lock); - - return res; -} - -/* - * this routine handles the overflow of the microsecond field - * - * The tricky bits of code to handle the accurate clock support - * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. - * They were originally developed for SUN and DEC kernels. - * All the kudos should go to Dave for this stuff. - */ -void second_overflow(void) -{ - s64 delta; /* Bump the maxerror field */ time_maxerror += MAXFREQ / NSEC_PER_USEC; @@ -253,23 +251,25 @@ void second_overflow(void) tick_length += delta; if (!time_adjust) - return; + goto out; if (time_adjust > MAX_TICKADJ) { time_adjust -= MAX_TICKADJ; tick_length += MAX_TICKADJ_SCALED; - return; + goto out; } if (time_adjust < -MAX_TICKADJ) { time_adjust += MAX_TICKADJ; tick_length -= MAX_TICKADJ_SCALED; - return; + goto out; } tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT; time_adjust = 0; +out: + return leap; } #ifdef CONFIG_GENERIC_CMOS_UPDATE @@ -331,27 +331,6 @@ static void notify_cmos_timer(void) static inline void notify_cmos_timer(void) { } #endif -/* - * Start the leap seconds timer: - */ -static inline void ntp_start_leap_timer(struct timespec *ts) -{ - long now = ts->tv_sec; - - if (time_status & STA_INS) { - time_state = TIME_INS; - now += 86400 - now % 86400; - hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS); - - return; - } - - if (time_status & STA_DEL) { - time_state = TIME_DEL; - now += 86400 - (now + 1) % 86400; - hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS); - } -} /* * Propagate a new txc->status value into the NTP state: @@ -374,22 +353,6 @@ static inline void process_adj_status(struct timex *txc, struct timespec *ts) time_status &= STA_RONLY; time_status |= txc->status & ~STA_RONLY; - switch (time_state) { - case TIME_OK: - ntp_start_leap_timer(ts); - break; - case TIME_INS: - case TIME_DEL: - time_state = TIME_OK; - ntp_start_leap_timer(ts); - case TIME_WAIT: - if (!(time_status & (STA_INS | STA_DEL))) - time_state = TIME_OK; - break; - case TIME_OOP: - hrtimer_restart(&leap_timer); - break; - } } /* * Called with the xtime lock held, so we can access and modify @@ -469,9 +432,6 @@ int do_adjtimex(struct timex *txc) (txc->tick < 900000/USER_HZ || txc->tick > 1100000/USER_HZ)) return -EINVAL; - - if (txc->modes & ADJ_STATUS && time_state != TIME_OK) - hrtimer_cancel(&leap_timer); } getnstimeofday(&ts); @@ -549,6 +509,4 @@ __setup("ntp_tick_adj=", ntp_tick_adj_setup); void __init ntp_init(void) { ntp_clear(); - hrtimer_init(&leap_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); - leap_timer.function = ntp_leap_second; } diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 268020d..df1e939 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -176,14 +176,6 @@ void update_xtime_cache(u64 nsec) timespec_add_ns(&xtime_cache, nsec); } -/* must hold xtime_lock */ -void timekeeping_leap_insert(int leapsecond) -{ - xtime.tv_sec += leapsecond; - wall_to_monotonic.tv_sec -= leapsecond; - update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult); -} - #ifdef CONFIG_GENERIC_TIME /** @@ -762,9 +754,11 @@ static cycle_t logarithmic_accumulation(cycle_t offset, int shift) timekeeper.xtime_nsec += timekeeper.xtime_interval << shift; while (timekeeper.xtime_nsec >= nsecps) { + int leap; timekeeper.xtime_nsec -= nsecps; xtime.tv_sec++; - second_overflow(); + leap = second_overflow(xtime.tv_sec); + xtime.tv_sec += leap; } /* Accumulate into raw time */ -- 1.7.12.rc2