From: "Justin P. Mattock" <justinmattock@gmail.com>
To: forest@alittletooquiet.net
Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
"Justin P. Mattock" <justinmattock@gmail.com>
Subject: [PATCH 3/3]NEXT:staging "vt6656" Typo rename Embeded to Embedded.
Date: Sun, 26 Aug 2012 08:16:45 -0700 [thread overview]
Message-ID: <1345994205-19044-3-git-send-email-justinmattock@gmail.com> (raw)
In-Reply-To: <1345994205-19044-1-git-send-email-justinmattock@gmail.com>
From: "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
---
The below patch renames Embeded to Embedded.
drivers/staging/vt6656/rf.c | 52 +++++++++++++++++++++----------------------
drivers/staging/vt6656/rf.h | 2 +-
2 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/vt6656/rf.c b/drivers/staging/vt6656/rf.c
index 6205e65..593cdc7 100644
--- a/drivers/staging/vt6656/rf.c
+++ b/drivers/staging/vt6656/rf.c
@@ -26,7 +26,7 @@
* Date: Feb. 19, 2004
*
* Functions:
- * IFRFbWriteEmbeded - Embedded write RF register via MAC
+ * IFRFbWriteEmbedded - Embedded write RF register via MAC
*
* Revision History:
*
@@ -722,7 +722,7 @@ const BYTE RFaby11aChannelIndex[200] = {
* Return Value: TRUE if succeeded; FALSE if failed.
*
*/
-BOOL IFRFbWriteEmbeded (PSDevice pDevice, DWORD dwData)
+BOOL IFRFbWriteEmbedded (PSDevice pDevice, DWORD dwData)
{
BYTE pbyData[4];
@@ -828,23 +828,23 @@ BOOL bResult = TRUE;
case RF_AL2230 :
if (pDevice->byCurPwr >= AL2230_PWR_IDX_LEN)
return FALSE;
- bResult &= IFRFbWriteEmbeded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
if (uRATE <= RATE_11M)
- bResult &= IFRFbWriteEmbeded(pDevice, 0x0001B400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x0001B400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
else
- bResult &= IFRFbWriteEmbeded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
break;
case RF_AL2230S :
if (pDevice->byCurPwr >= AL2230_PWR_IDX_LEN)
return FALSE;
- bResult &= IFRFbWriteEmbeded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
if (uRATE <= RATE_11M) {
- bResult &= IFRFbWriteEmbeded(pDevice, 0x040C1400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
- bResult &= IFRFbWriteEmbeded(pDevice, 0x00299B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x040C1400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x00299B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
}else {
- bResult &= IFRFbWriteEmbeded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
- bResult &= IFRFbWriteEmbeded(pDevice, 0x00099B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x00099B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
}
break;
@@ -854,10 +854,10 @@ BOOL bResult = TRUE;
DWORD dwMax7230Pwr;
if (uRATE <= RATE_11M) { //RobertYu:20060426, for better 11b mask
- bResult &= IFRFbWriteEmbeded(pDevice, 0x111BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x111BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
}
else {
- bResult &= IFRFbWriteEmbeded(pDevice, 0x221BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x221BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
}
if (pDevice->byCurPwr > AL7230_PWR_IDX_LEN) return FALSE;
@@ -866,7 +866,7 @@ BOOL bResult = TRUE;
dwMax7230Pwr = 0x080C0B00 | ( (pDevice->byCurPwr) << 12 ) |
(BY_AL7230_REG_LEN << 3 ) | IFREGCTL_REGW;
- bResult &= IFRFbWriteEmbeded(pDevice, dwMax7230Pwr);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwMax7230Pwr);
break;
}
break;
@@ -879,7 +879,7 @@ BOOL bResult = TRUE;
return FALSE;
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x17 << 8 ) /* Reg7 */ |
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226Pwr);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
break;
}
@@ -894,27 +894,27 @@ BOOL bResult = TRUE;
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0xE07 << 8 ) /* Reg7 */ | //RobertYu:20060420, TWIF 1.10
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226Pwr);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
- bResult &= IFRFbWriteEmbeded(pDevice, 0x03C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x03C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW);
if (pDevice->sMgmtObj.eScanState != WMAC_NO_SCANNING) {
// scanning, the channel number is pDevice->uScanChannel
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"@@@@ RFbRawSetPower> 11B mode uCurrChannel[%d]\n", pDevice->sMgmtObj.uScanChannel);
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226D0LoCurrentTable[pDevice->sMgmtObj.uScanChannel-1]); //RobertYu:20060420, sometimes didn't change channel just set power with different rate
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226D0LoCurrentTable[pDevice->sMgmtObj.uScanChannel-1]); //RobertYu:20060420, sometimes didn't change channel just set power with different rate
} else {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"@@@@ RFbRawSetPower> 11B mode uCurrChannel[%d]\n", pDevice->sMgmtObj.uCurrChannel);
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226D0LoCurrentTable[pDevice->sMgmtObj.uCurrChannel-1]); //RobertYu:20060420, sometimes didn't change channel just set power with different rate
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226D0LoCurrentTable[pDevice->sMgmtObj.uCurrChannel-1]); //RobertYu:20060420, sometimes didn't change channel just set power with different rate
}
- bResult &= IFRFbWriteEmbeded(pDevice, 0x015C0800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060420, ok now, new switching power (mini-pci can have bigger power consumption)
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x015C0800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060420, ok now, new switching power (mini-pci can have bigger power consumption)
} else {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"@@@@ RFbRawSetPower> 11G mode\n");
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x7 << 8 ) /* Reg7 */ | //RobertYu:20060420, TWIF 1.10
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226Pwr);
- bResult &= IFRFbWriteEmbeded(pDevice, 0x00C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060327
- bResult &= IFRFbWriteEmbeded(pDevice, 0x016BC600+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
- bResult &= IFRFbWriteEmbeded(pDevice, 0x00900800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x00C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060327
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x016BC600+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x00900800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
}
break;
}
@@ -929,7 +929,7 @@ BOOL bResult = TRUE;
dwVT3342Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x27 << 8 ) /* Reg7 */ |
(BY_VT3342_REG_LEN << 3 ) | IFREGCTL_REGW;
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3342Pwr);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3342Pwr);
break;
}
@@ -1141,9 +1141,9 @@ BOOL s_bVT3226D0_11bLoCurrentAdjust(
bResult = TRUE;
if( b11bMode )
- bResult &= IFRFbWriteEmbeded(pDevice, dwVT3226D0LoCurrentTable[byChannel-1]);
+ bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226D0LoCurrentTable[byChannel-1]);
else
- bResult &= IFRFbWriteEmbeded(pDevice, 0x016BC600+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060412
+ bResult &= IFRFbWriteEmbedded(pDevice, 0x016BC600+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060412
return bResult;
}
diff --git a/drivers/staging/vt6656/rf.h b/drivers/staging/vt6656/rf.h
index f5ba8fd..72eb27a 100644
--- a/drivers/staging/vt6656/rf.h
+++ b/drivers/staging/vt6656/rf.h
@@ -63,7 +63,7 @@
extern const BYTE RFaby11aChannelIndex[200];
/*--------------------- Export Functions --------------------------*/
-BOOL IFRFbWriteEmbeded(PSDevice pDevice, DWORD dwData);
+BOOL IFRFbWriteEmbedded(PSDevice pDevice, DWORD dwData);
BOOL RFbSetPower(PSDevice pDevice, unsigned int uRATE, unsigned int uCH);
BOOL RFbRawSetPower(
--
1.7.9.5
prev parent reply other threads:[~2012-08-26 15:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-26 15:16 [PATCH 1/3]NEXT:staging "vt6656" Fix typos in comments, and in a printk message Justin P. Mattock
2012-08-26 15:16 ` [PATCH 2/3]NEXT:staging "vt6656" Typo rename Caculate to Calculate Justin P. Mattock
2012-08-26 15:16 ` Justin P. Mattock [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345994205-19044-3-git-send-email-justinmattock@gmail.com \
--to=justinmattock@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=forest@alittletooquiet.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).