linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alan Ott <alan@signal11.us>
To: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>,
	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Tony Cheneau <tony.cheneau@amnesiak.org>
Cc: linux-zigbee-devel@lists.sourceforge.net, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Alan Ott <alan@signal11.us>
Subject: [PATCH v3 2/2] 6lowpan: handle NETDEV_UNREGISTER event
Date: Sat,  1 Sep 2012 11:57:07 -0400	[thread overview]
Message-ID: <1346515027-5237-3-git-send-email-alan@signal11.us> (raw)
In-Reply-To: <1346294341-26808-1-git-send-email-alan@signal11.us>

Before, it was impossible to remove a wpan device which had lowpan
attached to it.

Signed-off-by: Alan Ott <alan@signal11.us>
---
 net/ieee802154/6lowpan.c |   44 +++++++++++++++++++++++++++++++++++++-------
 1 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c
index b28ec79..d529111 100644
--- a/net/ieee802154/6lowpan.c
+++ b/net/ieee802154/6lowpan.c
@@ -1063,12 +1063,6 @@ out:
 	return (err < 0 ? NETDEV_TX_BUSY : NETDEV_TX_OK);
 }
 
-static void lowpan_dev_free(struct net_device *dev)
-{
-	dev_put(lowpan_dev_info(dev)->real_dev);
-	free_netdev(dev);
-}
-
 static struct wpan_phy *lowpan_get_phy(const struct net_device *dev)
 {
 	struct net_device *real_dev = lowpan_dev_info(dev)->real_dev;
@@ -1118,7 +1112,7 @@ static void lowpan_setup(struct net_device *dev)
 	dev->netdev_ops		= &lowpan_netdev_ops;
 	dev->header_ops		= &lowpan_header_ops;
 	dev->ml_priv		= &lowpan_mlme;
-	dev->destructor		= lowpan_dev_free;
+	dev->destructor		= free_netdev;
 }
 
 static int lowpan_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -1244,6 +1238,34 @@ static inline void __init lowpan_netlink_fini(void)
 	rtnl_link_unregister(&lowpan_link_ops);
 }
 
+static int lowpan_device_event(struct notifier_block *unused,
+				unsigned long event,
+				void *ptr)
+{
+	struct net_device *dev = ptr;
+	LIST_HEAD(del_list);
+	struct lowpan_dev_record *entry, *tmp;
+
+	if (dev->type != ARPHRD_IEEE802154)
+		goto out;
+
+	if (event == NETDEV_UNREGISTER) {
+		list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) {
+			if (lowpan_dev_info(entry->ldev)->real_dev == dev)
+				lowpan_dellink(entry->ldev, &del_list);
+		}
+
+		unregister_netdevice_many(&del_list);
+	};
+
+out:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block lowpan_dev_notifier = {
+	.notifier_call = lowpan_device_event,
+};
+
 static struct packet_type lowpan_packet_type = {
 	.type = __constant_htons(ETH_P_IEEE802154),
 	.func = lowpan_rcv,
@@ -1258,6 +1280,12 @@ static int __init lowpan_init_module(void)
 		goto out;
 
 	dev_add_pack(&lowpan_packet_type);
+
+	err = register_netdevice_notifier(&lowpan_dev_notifier);
+	if (err < 0) {
+		dev_remove_pack(&lowpan_packet_type);
+		lowpan_netlink_fini();
+	}
 out:
 	return err;
 }
@@ -1270,6 +1298,8 @@ static void __exit lowpan_cleanup_module(void)
 
 	dev_remove_pack(&lowpan_packet_type);
 
+	unregister_netdevice_notifier(&lowpan_dev_notifier);
+
 	/* Now 6lowpan packet_type is removed, so no new fragments are
 	 * expected on RX, therefore that's the time to clean incomplete
 	 * fragments.
-- 
1.7.0.4


      parent reply	other threads:[~2012-09-01 15:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-30  2:38 [PATCH v2 0/2] 6lowpan fixes Alan Ott
2012-08-30  2:39 ` [PATCH v2 1/2] 6lowpan: Make a copy of skb's delivered to 6lowpan Alan Ott
2012-08-31  7:01   ` Eric Dumazet
2012-08-31 13:56     ` Alan Ott
2012-08-30  2:39 ` [PATCH v2 2/2] 6lowpan: handle NETDEV_UNREGISTER event Alan Ott
2012-09-01 15:57 ` [PATCH v3 0/2] 6lowpan fixes Alan Ott
2012-09-02  2:48   ` David Miller
2012-09-01 15:57 ` [PATCH v3 1/2] 6lowpan: Make a copy of skb's delivered to 6lowpan Alan Ott
2012-09-01 15:57 ` Alan Ott [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346515027-5237-3-git-send-email-alan@signal11.us \
    --to=alan@signal11.us \
    --cc=alex.bluesman.smirnov@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dbaryshkov@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-zigbee-devel@lists.sourceforge.net \
    --cc=netdev@vger.kernel.org \
    --cc=tony.cheneau@amnesiak.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).