From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>, x86 <x86@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH part3 01/11] PCI: Separate out pci_assign_unassigned_bus_resources()
Date: Sun, 2 Sep 2012 14:52:11 -0700 [thread overview]
Message-ID: <1346622741-30799-2-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1346622741-30799-1-git-send-email-yinghai@kernel.org>
It is main portion of pci_rescan_bus().
Separate it out and need to use it for pci root bus hot add later.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 32 ++++++++++++++++++--------------
include/linux/pci.h | 1 +
2 files changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f0e959c..e5c45c8 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1511,25 +1511,12 @@ enable_all:
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
-#ifdef CONFIG_HOTPLUG
-/**
- * pci_rescan_bus - scan a PCI bus for devices.
- * @bus: PCI bus to scan
- *
- * Scan a PCI bus and child buses for new devices, adds them,
- * and enables them.
- *
- * Returns the max number of subordinate bus discovered.
- */
-unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
+void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
{
- unsigned int max;
struct pci_dev *dev;
LIST_HEAD(add_list); /* list of resources that
want additional resources */
- max = pci_scan_child_bus(bus);
-
down_read(&pci_bus_sem);
list_for_each_entry(dev, &bus->devices, bus_list)
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
@@ -1542,6 +1529,23 @@ unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
BUG_ON(!list_empty(&add_list));
pci_enable_bridges(bus);
+}
+#ifdef CONFIG_HOTPLUG
+/**
+ * pci_rescan_bus - scan a PCI bus for devices.
+ * @bus: PCI bus to scan
+ *
+ * Scan a PCI bus and child buses for new devices, adds them,
+ * and enables them.
+ *
+ * Returns the max number of subordinate bus discovered.
+ */
+unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
+{
+ unsigned int max;
+
+ max = pci_scan_child_bus(bus);
+ pci_assign_unassigned_bus_resources(bus);
pci_bus_add_devices(bus);
return max;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 29a4704..1bd7559 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -983,6 +983,7 @@ void pci_bus_size_bridges(struct pci_bus *bus);
int pci_claim_resource(struct pci_dev *, int);
void pci_assign_unassigned_resources(void);
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
+void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
void pdev_enable_device(struct pci_dev *);
int pci_enable_resources(struct pci_dev *, int mask);
void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
--
1.7.7
next prev parent reply other threads:[~2012-09-02 22:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-02 21:52 [PATCH part3 00/11] PCI, x86: pci root bus hotplug support - part3 Yinghai Lu
2012-09-02 21:52 ` Yinghai Lu [this message]
2012-09-02 21:52 ` [PATCH part3 02/11] PCI: Move back pci_rescan_bus() to probe.c Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 03/11] PCI: pci_bus_size_bridges() should not size own bridge Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 04/11] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 05/11] PCI, sysfs: Use device_type and attr_groups with pci dev Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 06/11] PCI, sysfs: Create rescan_bridge under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 07/11] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 08/11] PCI: Make pci_rescan_bus_bridge_resize() use pci_scan_bridge Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 09/11] PCI: Clean up rescan_bus_bridge_resize() Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 10/11] PCI: Rescan bus or bridge using callback method too Yinghai Lu
2012-09-02 21:52 ` [PATCH part3 11/11] PCI, sysfs: Clean up rescan/remove with scheule_callback Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346622741-30799-2-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).