From: "Samuel Iglesias Gonsálvez" <siglesias@igalia.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
industrypack-devel@lists.sourceforge.net,
"Jens Taprogge" <jens.taprogge@taprogge.org>,
"Samuel Iglesias Gonsálvez" <siglesias@igalia.com>
Subject: [PATCH 11/16] Staging: ipack: Move device ids from ipoctal.c to ipack_ids.h.
Date: Tue, 4 Sep 2012 17:01:16 +0200 [thread overview]
Message-ID: <1346770881-4723-12-git-send-email-siglesias@igalia.com> (raw)
In-Reply-To: <1346770881-4723-1-git-send-email-siglesias@igalia.com>
From: Jens Taprogge <jens.taprogge@taprogge.org>
Rename them in the process.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
---
drivers/staging/ipack/devices/ipoctal.c | 26 +++++++++++---------------
drivers/staging/ipack/ipack_ids.h | 5 +++++
2 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
index c1d0c00..ed08864 100644
--- a/drivers/staging/ipack/devices/ipoctal.c
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -25,11 +25,6 @@
#include "ipoctal.h"
#include "scc2698.h"
-#define IP_OCTAL_MANUFACTURER_ID 0xF0
-#define IP_OCTAL_232_ID 0x22
-#define IP_OCTAL_422_ID 0x2A
-#define IP_OCTAL_485_ID 0x48
-
#define IP_OCTAL_ID_SPACE_VECTOR 0x41
#define IP_OCTAL_NB_BLOCKS 4
@@ -231,7 +226,7 @@ static int ipoctal_irq_handler(void *arg)
/* In case of RS-485, change from TX to RX when finishing TX.
* Half-duplex.
*/
- if ((ipoctal->board_id == IP_OCTAL_485_ID) &&
+ if ((ipoctal->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
(sr & SR_TX_EMPTY) &&
(ipoctal->nb_bytes[channel] == 0)) {
ipoctal_write_io_reg(ipoctal,
@@ -304,7 +299,7 @@ static int ipoctal_irq_handler(void *arg)
if ((ipoctal->nb_bytes[channel] == 0) &&
(waitqueue_active(&ipoctal->queue[channel]))) {
- if (ipoctal->board_id != IP_OCTAL_485_ID) {
+ if (ipoctal->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
ipoctal->write = 1;
wake_up_interruptible(&ipoctal->queue[channel]);
}
@@ -322,15 +317,16 @@ static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
unsigned char manufacturerID;
unsigned char board_id;
+
manufacturerID = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MANUFACTURER_ID);
- if (manufacturerID != IP_OCTAL_MANUFACTURER_ID)
+ if (manufacturerID != IPACK1_VENDOR_ID_SBS)
return -ENODEV;
board_id = ioread8(dev->id_space.address + IPACK_IDPROM_OFFSET_MODEL);
switch (board_id) {
- case IP_OCTAL_232_ID:
- case IP_OCTAL_422_ID:
- case IP_OCTAL_485_ID:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_232:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_422:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_485:
*id = board_id;
break;
default:
@@ -543,7 +539,7 @@ static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel,
ipoctal_copy_write_buffer(ipoctal, channel, buf, count);
/* As the IP-OCTAL 485 only supports half duplex, do it manually */
- if (ipoctal->board_id == IP_OCTAL_485_ID) {
+ if (ipoctal->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
ipoctal_write_io_reg(ipoctal,
&ipoctal->chan_regs[channel].w.cr,
CR_DISABLE_RX);
@@ -654,7 +650,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
/* Set the flow control */
switch (ipoctal->board_id) {
- case IP_OCTAL_232_ID:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_232:
if (cflag & CRTSCTS) {
mr1 |= MR1_RxRTS_CONTROL_ON;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
@@ -663,11 +659,11 @@ static void ipoctal_set_termios(struct tty_struct *tty,
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
}
break;
- case IP_OCTAL_422_ID:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_422:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
break;
- case IP_OCTAL_485_ID:
+ case IPACK1_DEVICE_ID_SBS_OCTAL_485:
mr1 |= MR1_RxRTS_CONTROL_OFF;
mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
break;
diff --git a/drivers/staging/ipack/ipack_ids.h b/drivers/staging/ipack/ipack_ids.h
index ba85ec5..8153fee 100644
--- a/drivers/staging/ipack/ipack_ids.h
+++ b/drivers/staging/ipack/ipack_ids.h
@@ -25,3 +25,8 @@
#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D
#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E
#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F
+
+#define IPACK1_VENDOR_ID_SBS 0xF0
+#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22
+#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A
+#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48
--
1.7.10.4
next prev parent reply other threads:[~2012-09-04 15:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-04 15:01 [PATCH 00/16] ipack: autoload IP module drivers Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 01/16] Staging: ipack/bridges/tpci200: Reorganize tpci200_probe in preparation for functional changes Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 02/16] Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 03/16] Staging: ipack/devices/ipoctal: Convert ipoctal to directly use ioread/write functions Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 04/16] Staging: ipack/bridges/tpci200: Remove the read/write functions from ipack_bus_ops Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 05/16] Staging: ipack: remove read/write operations " Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 06/16] Staging: ipack/devices/ipoctal: ipoctal cleanups Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 07/16] Staging: ipack/devices/ipoctal: Tidy up ipoctal some more Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 08/16] Staging: ipack: implement ipack device table Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 09/16] Staging: ipack: Read the ID space during device registration Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 10/16] Staging: ipack: Parse vendor and device id Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` Samuel Iglesias Gonsálvez [this message]
2012-09-04 15:01 ` [PATCH 12/16] Staging: ipack: Make ipack_driver_ops const Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 13/16] Staging: ipack/devices/ipoctal: Expose DEVICE_TABLE for ipoctal Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 14/16] Staging: ipack: Implement device matching on the bus level Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 15/16] Staging: ipack: Expose modalias through sysfs Samuel Iglesias Gonsálvez
2012-09-04 15:01 ` [PATCH 16/16] Staging: ipack: Provide ID Prom " Samuel Iglesias Gonsálvez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346770881-4723-12-git-send-email-siglesias@igalia.com \
--to=siglesias@igalia.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=industrypack-devel@lists.sourceforge.net \
--cc=jens.taprogge@taprogge.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).