From: mathieu.poirier@linaro.org
To: linux-kernel@vger.kernel.org, cbou@mail.ru, dwmw2@infradead.org
Cc: mathieu.poirier@linaro.org
Subject: [PATCH 46/57] power: chargealg: Realign with upstream version
Date: Tue, 25 Sep 2012 10:12:43 -0600 [thread overview]
Message-ID: <1348589574-25655-47-git-send-email-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <1348589574-25655-1-git-send-email-mathieu.poirier@linaro.org>
From: Loic Pallardy <loic.pallardy@stericsson.com>
Upstream version of AB charge algo has been reverted
during kernel 3.4 port.
This patch restore state by:
- renaming ab8500_chargal.c in abx500_chargal.c
- renaming function from ab8500 to abx500
- moving generic structure in "include/mfd/abx500.h"
Goal is to ease next code reversion and realignment
with mainline
Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
---
drivers/power/ab8500_charger.c | 166 +++++++++++-----------------------
include/linux/mfd/abx500.h | 10 ++-
include/linux/mfd/abx500/ab8500-bm.h | 5 +-
3 files changed, 65 insertions(+), 116 deletions(-)
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index d90fe9f..68a4128 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -79,6 +79,7 @@
#define AB8500_USB_LINK_STATUS 0x78
#define AB8505_USB_LINK_STATUS 0xF8
#define AB8500_STD_HOST_SUSP 0x18
+#define USB_LINK_STATUS_SHIFT 3
/* Watchdog timeout constant */
#define WD_TIMER 0x30 /* 4min */
@@ -743,8 +744,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
dev_err(di->dev, "VBUS has collapsed\n");
ret = -ENXIO;
break;
- }
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ } else {
dev_dbg(di->dev, "USB Type - Charging not allowed\n");
di->max_usb_in_curr.usb_type_max =
USB_CH_IP_CUR_LVL_0P05;
@@ -799,30 +799,22 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- if (is_ab8500(di->parent)) {
+ if (is_ab8500(di->parent))
ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
- } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
- ret = abx500_get_register_interruptible(di->dev,
- AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
- } else {
- dev_err(di->dev, "%s unsupported analog baseband\n", __func__);
- return -ENXIO;
- }
+ AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
/* get the USB type */
- if (is_ab8500(di->parent)) {
- val = (val & AB8500_USB_LINK_STATUS) >> 3;
- } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
- val = (val & AB8505_USB_LINK_STATUS) >> 3;
- } else {
- dev_err(di->dev, "%s unsupported analog baseband\n", __func__);
- return -ENXIO;
- }
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
ret = ab8500_charger_max_usb_curr(di,
(enum ab8500_charger_link_status) val);
@@ -858,17 +850,12 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
return ret;
}
- if (is_ab8500(di->parent)) {
+ if (is_ab8500(di->parent))
ret = abx500_get_register_interruptible(di->dev,
AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
- } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ else
ret = abx500_get_register_interruptible(di->dev,
AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
- } else {
- dev_err(di->dev,
- "%s unsupported analog baseband\n", __func__);
- return -ENXIO;
- }
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
@@ -882,15 +869,12 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
*/
/* get the USB type */
- if (is_ab8500(di->parent)) {
- val = (val & AB8500_USB_LINK_STATUS) >> 3;
- } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
- val = (val & AB8505_USB_LINK_STATUS) >> 3;
- } else {
- dev_err(di->dev,
- "%s unsupported analog baseband\n", __func__);
- return -ENXIO;
- }
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
if (val)
break;
}
@@ -985,51 +969,6 @@ static int ab8500_charger_voltage_map[] = {
4600 ,
};
-/*
- * This array maps the raw hex value to charger current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_current_map[] = {
- 100 ,
- 200 ,
- 300 ,
- 400 ,
- 500 ,
- 600 ,
- 700 ,
- 800 ,
- 900 ,
- 1000 ,
- 1100 ,
- 1200 ,
- 1300 ,
- 1400 ,
- 1500 ,
-};
-
-/*
- * This array maps the raw hex value to VBUS input current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_vbus_in_curr_map[] = {
- USB_CH_IP_CUR_LVL_0P05,
- USB_CH_IP_CUR_LVL_0P09,
- USB_CH_IP_CUR_LVL_0P19,
- USB_CH_IP_CUR_LVL_0P29,
- USB_CH_IP_CUR_LVL_0P38,
- USB_CH_IP_CUR_LVL_0P45,
- USB_CH_IP_CUR_LVL_0P5,
- USB_CH_IP_CUR_LVL_0P6,
- USB_CH_IP_CUR_LVL_0P7,
- USB_CH_IP_CUR_LVL_0P8,
- USB_CH_IP_CUR_LVL_0P9,
- USB_CH_IP_CUR_LVL_1P0,
- USB_CH_IP_CUR_LVL_1P1,
- USB_CH_IP_CUR_LVL_1P3,
- USB_CH_IP_CUR_LVL_1P4,
- USB_CH_IP_CUR_LVL_1P5,
-};
-
static int ab8500_voltage_to_regval(int voltage)
{
int i;
@@ -1051,41 +990,41 @@ static int ab8500_voltage_to_regval(int voltage)
return -1;
}
-static int ab8500_current_to_regval(int curr)
+static int ab8500_current_to_regval(struct ab8500_charger *di, int curr)
{
int i;
- if (curr < ab8500_charger_current_map[0])
+ if (curr < di->bat->chg_output_curr[0])
return 0;
- for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
- if (curr < ab8500_charger_current_map[i])
+ for (i = 0; i < di->bat->n_chg_out_curr; i++) {
+ if (curr < di->bat->chg_output_curr[i])
return i - 1;
}
/* If not last element, return error */
- i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
- if (curr == ab8500_charger_current_map[i])
+ i = di->bat->n_chg_out_curr - 1;
+ if (curr == di->bat->chg_output_curr[i])
return i;
else
return -1;
}
-static int ab8500_vbus_in_curr_to_regval(int curr)
+static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr)
{
int i;
- if (curr < ab8500_charger_vbus_in_curr_map[0])
+ if (curr < di->bat->chg_input_curr[0])
return 0;
- for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
- if (curr < ab8500_charger_vbus_in_curr_map[i])
+ for (i = 0; i < di->bat->n_chg_in_curr; i++) {
+ if (curr < di->bat->chg_input_curr[i])
return i - 1;
}
/* If not last element, return error */
- i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
- if (curr == ab8500_charger_vbus_in_curr_map[i])
+ i = di->bat->n_chg_in_curr - 1;
+ if (curr == di->bat->chg_input_curr[i])
return i;
else
return -1;
@@ -1181,7 +1120,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
case AB8500_MCH_IPT_CURLVL_REG:
shift_value = MAIN_CH_INPUT_CURR_SHIFT;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_current_to_regval(ich);
+ curr_index = ab8500_current_to_regval(di, ich);
step_udelay = STEP_UDELAY;
if (!di->ac.charger_connected)
no_stepping = true;
@@ -1189,7 +1128,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
case AB8500_USBCH_IPT_CRNTLVL_REG:
shift_value = VBUS_IN_CURR_LIM_SHIFT;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_vbus_in_curr_to_regval(ich);
+ curr_index = ab8500_vbus_in_curr_to_regval(di, ich);
step_udelay = STEP_UDELAY * 100;
ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
@@ -1203,8 +1142,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;
dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
- __func__,
- ab8500_charger_vbus_in_curr_map[auto_curr_index]);
+ __func__, di->bat->chg_input_curr[auto_curr_index]);
prev_curr_index = min(prev_curr_index, auto_curr_index);
@@ -1214,7 +1152,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
case AB8500_CH_OPT_CRNTLVL_REG:
shift_value = 0;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_current_to_regval(ich);
+ curr_index = ab8500_current_to_regval(di, ich);
if (curr_index == 0)
step_udelay = STEP_UDELAY;
else if ((curr_index - prev_curr_index) > 1)
@@ -1453,8 +1391,8 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
/* Check if the requested voltage or current is valid */
volt_index = ab8500_voltage_to_regval(vset);
- curr_index = ab8500_current_to_regval(iset);
- input_curr_index = ab8500_current_to_regval(
+ curr_index = ab8500_current_to_regval(di, iset);
+ input_curr_index = ab8500_current_to_regval(di,
di->bat->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
@@ -1624,7 +1562,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
/* Check if the requested voltage or current is valid */
volt_index = ab8500_voltage_to_regval(vset);
- curr_index = ab8500_current_to_regval(ich_out);
+ curr_index = ab8500_current_to_regval(di, ich_out);
if (volt_index < 0 || curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -2327,21 +2265,21 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
else
dev_dbg(di->dev, "Error reading USB link status\n");
- if (is_ab9540(di->parent) || is_ab8505(di->parent))
- link_status = AB8505_USB_LINK_STATUS;
- else
+ if (is_ab8500(di->parent))
link_status = AB8500_USB_LINK_STATUS;
+ else
+ link_status = AB8505_USB_LINK_STATUS;
if (detected_chargers & USB_PW_CONN) {
- if (((val & link_status) >> 3) == USB_STAT_NOT_VALID_LINK &&
+ if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
+ USB_STAT_NOT_VALID_LINK &&
di->invalid_charger_detect_state == 0) {
dev_dbg(di->dev,
"Invalid charger detected, state= 0\n");
/*Enable charger*/
abx500_mask_and_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_USBCH_CTRL1_REG,
- 0x01, 0x01);
+ AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
+ USB_CH_ENA, USB_CH_ENA);
/*Enable charger detection*/
abx500_mask_and_set_register_interruptible(di->dev,
AB8500_USB,
@@ -2366,7 +2304,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
AB8500_USB_LINE_STAT_REG,
&val);
dev_dbg(di->dev, "USB link status= 0x%02x\n",
- (val & link_status) >> 3);
+ (val & link_status) >> USB_LINK_STATUS_SHIFT);
di->invalid_charger_detect_state = 2;
}
} else {
@@ -2678,7 +2616,7 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
{
struct ab8500_charger *di = container_of(work,
struct ab8500_charger, vbus_drop_end_work.work);
- int ret;
+ int ret, curr;
u8 reg_value;
di->flags.vbus_drop_end = false;
@@ -2692,7 +2630,7 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
} else {
- int curr = ab8500_charger_vbus_in_curr_map[
+ curr = di->bat->chg_input_curr[
reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
if (di->max_usb_in_curr.calculated_max != curr) {
/* USB source is collapsing */
@@ -3434,8 +3372,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
- di->ac_chg.max_out_curr = ab8500_charger_current_map[
- ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->ac_chg.max_out_curr =
+ di->bat->chg_output_curr[di->bat->n_chg_out_curr - 1];
di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
di->ac_chg.enabled = di->pdata->ac_enabled;
di->ac_chg.external = false;
@@ -3461,8 +3399,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
- di->usb_chg.max_out_curr = ab8500_charger_current_map[
- ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->usb_chg.max_out_curr =
+ di->bat->chg_output_curr[di->bat->n_chg_out_curr - 1];
di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
di->usb_chg.enabled = di->pdata->usb_enabled;
di->usb_chg.external = false;
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index cb2b82a..a3bb93e 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -363,7 +363,11 @@ struct abx500_bm_charger_parameters {
* @interval_not_charging charge alg cycle period time when not charging (sec)
* @temp_hysteresis temperature hysteresis
* @gnd_lift_resistance Battery ground to phone ground resistance (mOhm)
- * @maxi: maximization parameters
+ * @n_chg_out_curr number of elements in array chg_output_curr
+ * @n_chg_in_curr number of elements in array chg_input_curr
+ * @chg_output_curr charger output current level map
+ * @chg_input_curr charger input current level map
+ * @maxi maximization parameters
* @cap_levels capacity in percent for the different capacity levels
* @bat_type table of supported battery types
* @chg_params charger parameters
@@ -394,6 +398,10 @@ struct abx500_bm_data {
int interval_not_charging;
int temp_hysteresis;
int gnd_lift_resistance;
+ int n_chg_out_curr;
+ int n_chg_in_curr;
+ int *chg_output_curr;
+ int *chg_input_curr;
const struct abx500_maxim_parameters *maxi;
const struct abx500_bm_capacity_levels *cap_levels;
const struct abx500_battery_type *bat_type;
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 5ae8a6f..721bd6d 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -33,7 +33,7 @@
#define AB8500_CH_STATUS2_REG 0x01
#define AB8500_CH_USBCH_STAT1_REG 0x02
#define AB8500_CH_USBCH_STAT2_REG 0x03
-#define AB8500_CH_FSM_STAT_REG 0x04
+#define AB8540_CH_USBCH_STAT3_REG 0x04
#define AB8500_CH_STAT_REG 0x05
/*
@@ -155,6 +155,7 @@
#define CH_OP_CUR_LVL_1P4 0x0D
#define CH_OP_CUR_LVL_1P5 0x0E
#define CH_OP_CUR_LVL_1P6 0x0F
+#define CH_OP_CUR_LVL_2P 0x3F
/* BTEMP High thermal limits */
#define BTEMP_HIGH_TH_57_0 0x00
@@ -244,6 +245,8 @@ enum bup_vch_sel {
#define BAT_CTRL_20U_ENA 0x02
#define BAT_CTRL_18U_ENA 0x01
#define BAT_CTRL_16U_ENA 0x02
+#define BAT_CTRL_60U_ENA 0x01
+#define BAT_CTRL_120U_ENA 0x02
#define BAT_CTRL_CMP_ENA 0x04
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
#define BAT_CTRL_PULL_UP_ENA 0x10
--
1.7.5.4
next prev parent reply other threads:[~2012-09-25 16:14 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-25 16:11 [PATCH 00/57] power: Upgrade to ux500 battery management driver mathieu.poirier
2012-09-25 16:11 ` [PATCH 01/57] power: ab8500_bm: Charger current step-up/down mathieu.poirier
2012-09-28 3:41 ` Anton Vorontsov
2012-09-25 16:11 ` [PATCH 02/57] power: ab8500_bm: Don't clear the CCMuxOffset bit mathieu.poirier
2012-09-28 3:42 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 03/57] power: ab8500_btemp: Detect battery type in workqueue mathieu.poirier
2012-09-25 16:12 ` [PATCH 04/57] power: ab8500: bm: movimg back to ab8500 platform data managment mathieu.poirier
2012-09-27 2:42 ` Anton Vorontsov
2012-09-27 2:53 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 05/57] power: ab8500_bm: Rename the power_loss function mathieu.poirier
2012-09-25 16:12 ` [PATCH 06/57] power: ab8500_bm: Skip first CCEOC irq for instant current mathieu.poirier
2012-09-25 16:12 ` [PATCH 07/57] power: ab8500_bm: Detect removed charger mathieu.poirier
2012-09-27 3:09 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 08/57] power: ab8500_fg: flush sync on suspend mathieu.poirier
2012-09-27 3:11 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 09/57] power: ab8500_fg: usleep_range instead of short msleep mathieu.poirier
2012-09-27 2:36 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 10/57] power: ab8500_charger: Handle gpadc errors mathieu.poirier
2012-09-25 16:12 ` [PATCH 11/57] power: Recharge condition not optimal for battery mathieu.poirier
2012-09-27 3:29 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 12/57] power: ab8500_fg: balance IRQ enable mathieu.poirier
2012-09-25 16:12 ` [PATCH 13/57] power: ab8500_bm: Ignore false btemp low interrupt mathieu.poirier
2012-09-27 3:32 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 14/57] power: Adds support for Car/Travel Adapters mathieu.poirier
2012-09-25 16:12 ` [PATCH 15/57] power: ab8500_fg: Round capacity output mathieu.poirier
2012-09-25 16:12 ` [PATCH 16/57] power: bm remove superfluous BTEMP thermal comp mathieu.poirier
2012-09-25 16:12 ` [PATCH 17/57] power: ab8500_bm: Added support for BATT_OVV mathieu.poirier
2012-09-27 3:36 ` Anton Vorontsov
2012-09-28 18:24 ` Mathieu Poirier
2012-09-28 18:26 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 18/57] power: Add sysfs interfaces for capacity mathieu.poirier
2012-09-27 7:08 ` Anton Vorontsov
2012-09-28 18:26 ` Mathieu Poirier
2012-09-28 19:11 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 19/57] power: remove unused defines mathieu.poirier
2012-09-25 16:12 ` [PATCH 20/57] power: Adds support for legacy USB chargers mathieu.poirier
2012-09-27 7:15 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 21/57] power: Overflow in current calculation mathieu.poirier
2012-09-25 16:12 ` [PATCH 22/57] power: AB workaround for invalid charger mathieu.poirier
2012-09-25 16:12 ` [PATCH 23/57] power: Add plaform data charger configurables mathieu.poirier
2012-09-25 16:12 ` [PATCH 24/57] power: ab8500_fg: Adjust for RF bursts voltage drops mathieu.poirier
2012-09-25 16:12 ` [PATCH 25/57] power: ab8500: adaptation to ab version mathieu.poirier
2012-09-25 16:12 ` [PATCH 26/57] power: charge: update watchdog for pm2xxx support mathieu.poirier
2012-09-25 16:12 ` [PATCH 27/57] power: sysfs interface update mathieu.poirier
2012-09-27 7:20 ` Anton Vorontsov
2012-09-28 18:26 ` Mathieu Poirier
2012-09-25 16:12 ` [PATCH 28/57] power: ab8500 - Accessing Autopower register fails mathieu.poirier
2012-09-25 16:12 ` [PATCH 29/57] power: ab8500_fg: Goto INIT_RECOVERY when charger removed mathieu.poirier
2012-09-25 16:12 ` [PATCH 30/57] power: ab8500: Flush & sync all works mathieu.poirier
2012-09-27 7:23 ` Anton Vorontsov
2012-09-28 18:28 ` Mathieu Poirier
2012-09-28 19:54 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 31/57] power: ab8500_fg: fix to use correct battery charge full design mathieu.poirier
2012-09-27 7:27 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 32/57] power: ab8500_charger: Do not touch VBUSOVV bits mathieu.poirier
2012-09-25 16:12 ` [PATCH 33/57] power: u8500_charger: Delay for USB enumeration mathieu.poirier
2012-09-27 7:42 ` Anton Vorontsov
2012-09-28 16:56 ` Mathieu Poirier
2012-09-28 17:09 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 34/57] power: ab8500_fg: add power cut feature for ab8505 mathieu.poirier
2012-09-28 0:01 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 35/57] power: ab8500_fg: Report unscaled capacity mathieu.poirier
2012-09-25 16:12 ` [PATCH 36/57] power: add backup battery charge voltages mathieu.poirier
2012-09-25 16:12 ` [PATCH 37/57] power: ab8500_bm: Quick re-attach charging behaviour mathieu.poirier
2012-09-28 0:13 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 38/57] power: l9540: Charge only mode fixes mathieu.poirier
2012-09-28 0:27 ` Anton Vorontsov
2012-09-28 18:32 ` Mathieu Poirier
2012-09-25 16:12 ` [PATCH 39/57] power: ab8500_charger: Prevent auto drop of VBUS mathieu.poirier
2012-09-28 0:52 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 40/57] power: ab8500: ADC for battery thermistor mathieu.poirier
2012-09-28 0:57 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 41/57] power: ab8500_btemp: Filter btemp readings mathieu.poirier
2012-09-25 16:12 ` [PATCH 42/57] power: charging: Allow capacity to raise from 1% mathieu.poirier
2012-09-25 16:12 ` [PATCH 43/57] power: charging: Add AB8505_USB_LINK_STATUS mathieu.poirier
2012-09-25 16:12 ` [PATCH 44/57] power: ab8500: remove unecesary define flag mathieu.poirier
2012-09-28 1:05 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 45/57] power: ab8500: defer btemp filtering while init mathieu.poirier
2012-09-28 1:08 ` Anton Vorontsov
2012-09-25 16:12 ` mathieu.poirier [this message]
2012-09-28 1:17 ` [PATCH 46/57] power: chargealg: Realign with upstream version Anton Vorontsov
2012-09-25 16:12 ` [PATCH 47/57] power: Harmonising platform data declaration/handling mathieu.poirier
2012-09-28 1:11 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 48/57] power: ab8500 : quick re-attach for ext charger mathieu.poirier
2012-09-28 1:19 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 49/57] power: Cancelling status charging notification mathieu.poirier
2012-09-28 2:16 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 50/57] power: ab8500-chargalg: update battery health on safety timer exp mathieu.poirier
2012-09-28 2:21 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 51/57] power: ab8500: Re-alignment with internal developement mathieu.poirier
2012-09-28 2:35 ` Anton Vorontsov
2012-09-28 2:45 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 52/57] power: abx500_chargalg: Use hrtimer mathieu.poirier
2012-09-28 2:47 ` Anton Vorontsov
2012-09-28 18:33 ` Mathieu Poirier
2012-09-28 19:41 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 53/57] power: ab8500_fg: Moving structure definitions to header file mathieu.poirier
2012-09-28 2:51 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 54/57] power: ab8500_charger: Use USBLink1Status Register mathieu.poirier
2012-09-28 2:56 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 55/57] power: ab8500_charger: Add UsbLineCtrl2 reference mathieu.poirier
2012-09-28 2:58 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 56/57] power: abx500_chargalg: Fix quick re-attach charger issue mathieu.poirier
2012-09-28 3:00 ` Anton Vorontsov
2012-09-25 16:12 ` [PATCH 57/57] power: ab8500_charger: Limit USB charger current mathieu.poirier
2012-09-27 3:38 ` [PATCH 00/57] power: Upgrade to ux500 battery management driver Anton Vorontsov
2012-09-27 22:08 ` Mathieu Poirier
2012-09-28 0:36 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348589574-25655-47-git-send-email-mathieu.poirier@linaro.org \
--to=mathieu.poirier@linaro.org \
--cc=cbou@mail.ru \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).