From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965625Ab2JWVH2 (ORCPT ); Tue, 23 Oct 2012 17:07:28 -0400 Received: from smtp.outflux.net ([198.145.64.163]:35884 "EHLO smtp.outflux.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933677Ab2JWUFG (ORCPT ); Tue, 23 Oct 2012 16:05:06 -0400 From: Kees Cook To: linux-kernel@vger.kernel.org Cc: Kees Cook , Mike Frysinger Subject: [PATCH 009/193] arch/blackfin: remove CONFIG_EXPERIMENTAL Date: Tue, 23 Oct 2012 13:01:22 -0700 Message-Id: <1351022666-6960-10-git-send-email-keescook@chromium.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1351022666-6960-1-git-send-email-keescook@chromium.org> References: <1351022666-6960-1-git-send-email-keescook@chromium.org> X-HELO: www.outflux.net Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Mike Frysinger Signed-off-by: Kees Cook --- arch/blackfin/Kconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index b6f3ad5..ca33c8d 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -562,8 +562,7 @@ choice accurate - This option is therefore marked experimental. config BFIN_KERNEL_CLOCK_MEMINIT_CALC - bool "Calculate Timings (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Calculate Timings" config BFIN_KERNEL_CLOCK_MEMINIT_SPEC bool "Provide accurate Timings based on target SCLK" @@ -1120,7 +1119,7 @@ endchoice comment "Memory Protection Unit" config MPU - bool "Enable the memory protection unit (EXPERIMENTAL)" + bool "Enable the memory protection unit" default n help Use the processor's MPU to protect applications from accessing @@ -1442,7 +1441,6 @@ config BFIN_CPU_FREQ config CPU_VOLTAGE bool "CPU Voltage scaling" - depends on EXPERIMENTAL depends on CPU_FREQ default n help -- 1.7.9.5