From: YAMANE Toshiaki <yamanetoshi@gmail.com>
To: Greg Kroah-Hartman <greg@kroah.com>
Cc: Ian Abbott <abbotti@mev.co.uk>,
Frank Mori Hess <fmhess@users.sourceforge.net>,
linux-kernel@vger.kernel.org,
YAMANE Toshiaki <yamanetoshi@gmail.com>
Subject: [PATCH v3] staging/comedi: Use pr_ or dev_ printks in drivers/gsc_hdpi.c
Date: Thu, 25 Oct 2012 20:12:26 +0900 [thread overview]
Message-ID: <1351163546-13261-1-git-send-email-yamanetoshi@gmail.com> (raw)
In-Reply-To: <20121025024357.GA24008@kroah.com>
fixed below checkpatch warning.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
some of them have been replaced by dev_dbg,
and added pr_fmt.
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
---
drivers/staging/comedi/drivers/gsc_hpdi.c | 31 +++++++++++++++--------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index abff660..a9d4372 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -45,6 +45,8 @@ support could be added to this driver.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/interrupt.h>
#include "../comedidev.h"
#include <linux/delay.h>
@@ -107,8 +109,7 @@ enum hpdi_registers {
int command_channel_valid(unsigned int channel)
{
if (channel == 0 || channel > 6) {
- printk(KERN_WARNING
- "gsc_hpdi: bug! invalid cable command channel\n");
+ pr_warn("bug! invalid cable command channel\n");
return 0;
}
return 1;
@@ -553,7 +554,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
int i;
int retval;
- printk(KERN_WARNING "comedi%d: gsc_hpdi\n", dev->minor);
+ dev_dbg(dev->class_dev, "gsc_hpdi\n");
if (alloc_private(dev, sizeof(struct hpdi_private)) < 0)
return -ENOMEM;
@@ -582,17 +583,17 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
} while (pcidev != NULL);
}
if (dev->board_ptr == NULL) {
- printk(KERN_WARNING "gsc_hpdi: no hpdi card found\n");
+ dev_warn(dev->class_dev, "no hpdi card found\n");
return -EIO;
}
- printk(KERN_WARNING
- "gsc_hpdi: found %s on bus %i, slot %i\n", board(dev)->name,
- pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+ dev_warn(dev->class_dev,
+ "found %s on bus %i, slot %i\n", board(dev)->name,
+ pcidev->bus->number, PCI_SLOT(pcidev->devfn));
if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
- printk(KERN_WARNING
- " failed enable PCI device and request regions\n");
+ dev_warn(dev->class_dev,
+ " failed enable PCI device and request regions\n");
return -EIO;
}
pci_set_master(pcidev);
@@ -613,7 +614,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
ioremap(priv(dev)->hpdi_phys_iobase,
pci_resource_len(pcidev, HPDI_BADDRINDEX));
if (!priv(dev)->plx9080_iobase || !priv(dev)->hpdi_iobase) {
- printk(KERN_WARNING " failed to remap io memory\n");
+ dev_warn(dev->class_dev, "failed to remap io memory\n");
return -ENOMEM;
}
@@ -625,13 +626,13 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* get irq */
if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
dev->driver->driver_name, dev)) {
- printk(KERN_WARNING
- " unable to allocate irq %u\n", pcidev->irq);
+ dev_warn(dev->class_dev,
+ "unable to allocate irq %u\n", pcidev->irq);
return -EINVAL;
}
dev->irq = pcidev->irq;
- printk(KERN_WARNING " irq %u\n", dev->irq);
+ dev_dbg(dev->class_dev, "irq %u\n", dev->irq);
/* allocate pci dma buffers */
for (i = 0; i < NUM_DMA_BUFFERS; i++) {
@@ -649,8 +650,8 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
&priv(dev)->
dma_desc_phys_addr);
if (priv(dev)->dma_desc_phys_addr & 0xf) {
- printk(KERN_WARNING
- " dma descriptors not quad-word aligned (bug)\n");
+ dev_warn(dev->class_dev,
+ "dma descriptors not quad-word aligned (bug)\n");
return -EIO;
}
--
1.7.9.5
next prev parent reply other threads:[~2012-10-25 11:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-10 12:20 [PATCH] staging/comedi: Use pr_ or dev_ printks in drivers/gsc_hdpi.c YAMANE Toshiaki
2012-10-22 19:52 ` Greg Kroah-Hartman
2012-10-25 2:23 ` [PATCH v2] " YAMANE Toshiaki
2012-10-25 2:43 ` Greg Kroah-Hartman
2012-10-25 2:46 ` Toshiaki Yamane
2012-10-25 11:12 ` YAMANE Toshiaki [this message]
2012-10-25 19:24 ` [PATCH v3] " Greg Kroah-Hartman
2012-10-26 0:21 ` [PATCH v4] staging/comedi: Use pr_ or dev_ printks in drivers/gsc_hpdi.c YAMANE Toshiaki
2012-10-25 10:50 ` [PATCH] staging/comedi: Use pr_ or dev_ printks in drivers/gsc_hdpi.c Toshiaki Yamane
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351163546-13261-1-git-send-email-yamanetoshi@gmail.com \
--to=yamanetoshi@gmail.com \
--cc=abbotti@mev.co.uk \
--cc=fmhess@users.sourceforge.net \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).