From: Sebastian Hahn <snsehahn@cip.cs.fau.de>
To: gregkh@linuxfoundation.org
Cc: Jennifer.Naumann@informatik.stud.uni-erlangen.de,
dan.carpenter@oracle.com, standby24x7@gmail.com,
Julia.Lawall@lip6.fr, jkosina@suse.cz, joe@perches.com,
yongjun_wei@trendmicro.com.cn, adam.buchbinder@gmail.com,
amwang@redhat.com, justinmattock@gmail.com, wfp5p@virginia.edu,
jim.cromie@gmail.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
linux-kernel@i4.informatik.uni-erlangen.de,
Sebastian Hahn <snsehahn@cip.cs.fau.de>
Subject: [PATCH 5/6] staging/rtl8192u: use same indent for switch and case
Date: Wed, 5 Dec 2012 21:40:22 +0100 [thread overview]
Message-ID: <1354740023-30849-6-git-send-email-snsehahn@cip.cs.fau.de> (raw)
In-Reply-To: <1354740023-30849-1-git-send-email-snsehahn@cip.cs.fau.de>
Fix the checkpatch error "switch and case should be at the same indent"
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
---
.../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 272 ++++++++--------
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 32 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c | 2 +-
drivers/staging/rtl8192u/r8192U_core.c | 338 ++++++++++----------
drivers/staging/rtl8192u/r8192U_wx.c | 12 +-
drivers/staging/rtl8192u/r819xU_firmware.c | 96 +++---
drivers/staging/rtl8192u/r819xU_phy.c | 78 ++---
7 files changed, 415 insertions(+), 415 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index e83c310..7062f9d 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -1948,166 +1948,166 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
- case IEEE80211_STYPE_ASSOC_RESP:
- case IEEE80211_STYPE_REASSOC_RESP:
-
- IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
- WLAN_FC_GET_STYPE(header->frame_ctl));
- if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
- ieee->iw_mode == IW_MODE_INFRA){
- struct ieee80211_network network_resp;
- struct ieee80211_network *network = &network_resp;
-
- if (0 == (errcode=assoc_parse(ieee,skb, &aid))){
- ieee->state=IEEE80211_LINKED;
- ieee->assoc_id = aid;
- ieee->softmac_stats.rx_ass_ok++;
- /* station support qos */
- /* Let the register setting defaultly with Legacy station */
- if(ieee->qos_support) {
- assoc_resp = (struct ieee80211_assoc_response_frame*)skb->data;
- memset(network, 0, sizeof(*network));
- if (ieee80211_parse_info_param(ieee,assoc_resp->info_element,\
- rx_stats->len - sizeof(*assoc_resp),\
- network,rx_stats)){
- return 1;
- }
- else
- { //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
- memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
- memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
- }
- if (ieee->handle_assoc_response != NULL)
- ieee->handle_assoc_response(ieee->dev, (struct ieee80211_assoc_response_frame*)header, network);
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
+
+ IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+ ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
+ ieee->iw_mode == IW_MODE_INFRA){
+ struct ieee80211_network network_resp;
+ struct ieee80211_network *network = &network_resp;
+
+ if (0 == (errcode=assoc_parse(ieee,skb, &aid))){
+ ieee->state=IEEE80211_LINKED;
+ ieee->assoc_id = aid;
+ ieee->softmac_stats.rx_ass_ok++;
+ /* station support qos */
+ /* Let the register setting defaultly with Legacy station */
+ if(ieee->qos_support) {
+ assoc_resp = (struct ieee80211_assoc_response_frame*)skb->data;
+ memset(network, 0, sizeof(*network));
+ if (ieee80211_parse_info_param(ieee,assoc_resp->info_element,\
+ rx_stats->len - sizeof(*assoc_resp),\
+ network,rx_stats)){
+ return 1;
}
- ieee80211_associate_complete(ieee);
- } else {
- /* aid could not been allocated */
- ieee->softmac_stats.rx_ass_err++;
- printk(
- "Association response status code 0x%x\n",
- errcode);
- IEEE80211_DEBUG_MGMT(
- "Association response status code 0x%x\n",
- errcode);
- if(ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
- queue_work(ieee->wq, &ieee->associate_procedure_wq);
- } else {
- ieee80211_associate_abort(ieee);
+ else
+ { //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
+ memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
+ memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
}
+ if (ieee->handle_assoc_response != NULL)
+ ieee->handle_assoc_response(ieee->dev, (struct ieee80211_assoc_response_frame*)header, network);
+ }
+ ieee80211_associate_complete(ieee);
+ } else {
+ /* aid could not been allocated */
+ ieee->softmac_stats.rx_ass_err++;
+ printk(
+ "Association response status code 0x%x\n",
+ errcode);
+ IEEE80211_DEBUG_MGMT(
+ "Association response status code 0x%x\n",
+ errcode);
+ if(ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
+ queue_work(ieee->wq, &ieee->associate_procedure_wq);
+ } else {
+ ieee80211_associate_abort(ieee);
}
}
- break;
+ }
+ break;
- case IEEE80211_STYPE_ASSOC_REQ:
- case IEEE80211_STYPE_REASSOC_REQ:
+ case IEEE80211_STYPE_ASSOC_REQ:
+ case IEEE80211_STYPE_REASSOC_REQ:
- if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->iw_mode == IW_MODE_MASTER)
+ if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+ ieee->iw_mode == IW_MODE_MASTER)
- ieee80211_rx_assoc_rq(ieee, skb);
- break;
+ ieee80211_rx_assoc_rq(ieee, skb);
+ break;
- case IEEE80211_STYPE_AUTH:
+ case IEEE80211_STYPE_AUTH:
- if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE){
- if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING &&
- ieee->iw_mode == IW_MODE_INFRA){
+ if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE){
+ if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING &&
+ ieee->iw_mode == IW_MODE_INFRA){
- IEEE80211_DEBUG_MGMT("Received authentication response");
+ IEEE80211_DEBUG_MGMT("Received authentication response");
- if (0 == (errcode=auth_parse(skb, &challenge, &chlen))){
- if(ieee->open_wep || !challenge){
- ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATED;
- ieee->softmac_stats.rx_auth_rs_ok++;
- if(!(ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE))
+ if (0 == (errcode=auth_parse(skb, &challenge, &chlen))){
+ if(ieee->open_wep || !challenge){
+ ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATED;
+ ieee->softmac_stats.rx_auth_rs_ok++;
+ if(!(ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE))
+ {
+ if (!ieee->GetNmodeSupportBySecCfg(ieee->dev))
{
- if (!ieee->GetNmodeSupportBySecCfg(ieee->dev))
+ // WEP or TKIP encryption
+ if(IsHTHalfNmodeAPs(ieee))
{
- // WEP or TKIP encryption
- if(IsHTHalfNmodeAPs(ieee))
- {
- bSupportNmode = true;
- bHalfSupportNmode = true;
- }
- else
- {
- bSupportNmode = false;
- bHalfSupportNmode = false;
- }
- printk("==========>to link with AP using SEC(%d, %d)", bSupportNmode, bHalfSupportNmode);
+ bSupportNmode = true;
+ bHalfSupportNmode = true;
}
+ else
+ {
+ bSupportNmode = false;
+ bHalfSupportNmode = false;
+ }
+ printk("==========>to link with AP using SEC(%d, %d)", bSupportNmode, bHalfSupportNmode);
}
- /* Dummy wirless mode setting to avoid encryption issue */
- if(bSupportNmode) {
- //N mode setting
- ieee->SetWirelessMode(ieee->dev, \
- ieee->current_network.mode);
- }else{
- //b/g mode setting
- /*TODO*/
- ieee->SetWirelessMode(ieee->dev, IEEE_G);
- }
-
- if (ieee->current_network.mode == IEEE_N_24G && bHalfSupportNmode == true)
- {
- printk("===============>entern half N mode\n");
- ieee->bHalfWirelessN24GMode = true;
- }
- else
- ieee->bHalfWirelessN24GMode = false;
-
- ieee80211_associate_step2(ieee);
+ }
+ /* Dummy wirless mode setting to avoid encryption issue */
+ if(bSupportNmode) {
+ //N mode setting
+ ieee->SetWirelessMode(ieee->dev, \
+ ieee->current_network.mode);
}else{
- ieee80211_auth_challenge(ieee, challenge, chlen);
+ //b/g mode setting
+ /*TODO*/
+ ieee->SetWirelessMode(ieee->dev, IEEE_G);
+ }
+
+ if (ieee->current_network.mode == IEEE_N_24G && bHalfSupportNmode == true)
+ {
+ printk("===============>entern half N mode\n");
+ ieee->bHalfWirelessN24GMode = true;
}
+ else
+ ieee->bHalfWirelessN24GMode = false;
+
+ ieee80211_associate_step2(ieee);
}else{
- ieee->softmac_stats.rx_auth_rs_err++;
- IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
- ieee80211_associate_abort(ieee);
+ ieee80211_auth_challenge(ieee, challenge, chlen);
}
-
- }else if (ieee->iw_mode == IW_MODE_MASTER){
- ieee80211_rx_auth_rq(ieee, skb);
+ }else{
+ ieee->softmac_stats.rx_auth_rs_err++;
+ IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
+ ieee80211_associate_abort(ieee);
}
+
+ }else if (ieee->iw_mode == IW_MODE_MASTER){
+ ieee80211_rx_auth_rq(ieee, skb);
}
- break;
+ }
+ break;
- case IEEE80211_STYPE_PROBE_REQ:
+ case IEEE80211_STYPE_PROBE_REQ:
- if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
- ((ieee->iw_mode == IW_MODE_ADHOC ||
- ieee->iw_mode == IW_MODE_MASTER) &&
- ieee->state == IEEE80211_LINKED)){
- ieee80211_rx_probe_rq(ieee, skb);
- }
- break;
+ if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
+ ((ieee->iw_mode == IW_MODE_ADHOC ||
+ ieee->iw_mode == IW_MODE_MASTER) &&
+ ieee->state == IEEE80211_LINKED)){
+ ieee80211_rx_probe_rq(ieee, skb);
+ }
+ break;
- case IEEE80211_STYPE_DISASSOC:
- case IEEE80211_STYPE_DEAUTH:
- /* FIXME for now repeat all the association procedure
- * both for disassociation and deauthentication
- */
- if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
- ieee->state == IEEE80211_LINKED &&
- ieee->iw_mode == IW_MODE_INFRA){
-
- ieee->state = IEEE80211_ASSOCIATING;
- ieee->softmac_stats.reassoc++;
-
- notify_wx_assoc_event(ieee);
- //HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
- RemovePeerTS(ieee, header->addr2);
- queue_work(ieee->wq, &ieee->associate_procedure_wq);
- }
- break;
- case IEEE80211_STYPE_MANAGE_ACT:
- ieee80211_process_action(ieee,skb);
- break;
- default:
- return -1;
- break;
+ case IEEE80211_STYPE_DISASSOC:
+ case IEEE80211_STYPE_DEAUTH:
+ /* FIXME for now repeat all the association procedure
+ * both for disassociation and deauthentication
+ */
+ if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
+ ieee->state == IEEE80211_LINKED &&
+ ieee->iw_mode == IW_MODE_INFRA){
+
+ ieee->state = IEEE80211_ASSOCIATING;
+ ieee->softmac_stats.reassoc++;
+
+ notify_wx_assoc_event(ieee);
+ //HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+ RemovePeerTS(ieee, header->addr2);
+ queue_work(ieee->wq, &ieee->associate_procedure_wq);
+ }
+ break;
+ case IEEE80211_STYPE_MANAGE_ACT:
+ ieee80211_process_action(ieee,skb);
+ break;
+ default:
+ return -1;
+ break;
}
//dev_kfree_skb_any(skb);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index 7214361..c39e680 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -283,22 +283,22 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
ip = ip_hdr(skb);
switch (ip->tos & 0xfc) {
- case 0x20:
- return 2;
- case 0x40:
- return 1;
- case 0x60:
- return 3;
- case 0x80:
- return 4;
- case 0xa0:
- return 5;
- case 0xc0:
- return 6;
- case 0xe0:
- return 7;
- default:
- return 0;
+ case 0x20:
+ return 2;
+ case 0x40:
+ return 1;
+ case 0x60:
+ return 3;
+ case 0x80:
+ return 4;
+ case 0xa0:
+ return 5;
+ case 0xc0:
+ return 6;
+ case 0xe0:
+ return 7;
+ default:
+ return 0;
}
}
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index f0ba7f4..e1fe54a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -761,7 +761,7 @@ int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
case IW_MLME_DISASSOC:
ieee80211_disassociate(ieee);
break;
- default:
+ default:
return -EOPNOTSUPP;
}
return 0;
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 93fffea..f59bd92 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1875,43 +1875,43 @@ u8 MapHwQueueToFirmwareQueue(u8 QueueID)
u8 QueueSelect = 0x0; //defualt set to
switch(QueueID) {
- case BE_QUEUE:
- QueueSelect = QSLT_BE; //or QSelect = pTcb->priority;
- break;
+ case BE_QUEUE:
+ QueueSelect = QSLT_BE; //or QSelect = pTcb->priority;
+ break;
- case BK_QUEUE:
- QueueSelect = QSLT_BK; //or QSelect = pTcb->priority;
- break;
+ case BK_QUEUE:
+ QueueSelect = QSLT_BK; //or QSelect = pTcb->priority;
+ break;
- case VO_QUEUE:
- QueueSelect = QSLT_VO; //or QSelect = pTcb->priority;
- break;
+ case VO_QUEUE:
+ QueueSelect = QSLT_VO; //or QSelect = pTcb->priority;
+ break;
- case VI_QUEUE:
- QueueSelect = QSLT_VI; //or QSelect = pTcb->priority;
- break;
- case MGNT_QUEUE:
- QueueSelect = QSLT_MGNT;
- break;
+ case VI_QUEUE:
+ QueueSelect = QSLT_VI; //or QSelect = pTcb->priority;
+ break;
+ case MGNT_QUEUE:
+ QueueSelect = QSLT_MGNT;
+ break;
- case BEACON_QUEUE:
- QueueSelect = QSLT_BEACON;
- break;
+ case BEACON_QUEUE:
+ QueueSelect = QSLT_BEACON;
+ break;
- // TODO: 2006.10.30 mark other queue selection until we verify it is OK
- // TODO: Remove Assertions
+ // TODO: 2006.10.30 mark other queue selection until we verify it is OK
+ // TODO: Remove Assertions
//#if (RTL819X_FPGA_VER & RTL819X_FPGA_GUANGAN_070502)
- case TXCMD_QUEUE:
- QueueSelect = QSLT_CMD;
- break;
+ case TXCMD_QUEUE:
+ QueueSelect = QSLT_CMD;
+ break;
//#endif
- case HIGH_QUEUE:
- QueueSelect = QSLT_HIGH;
- break;
+ case HIGH_QUEUE:
+ QueueSelect = QSLT_HIGH;
+ break;
- default:
- RT_TRACE(COMP_ERR, "TransmitTCB(): Impossible Queue Selection: %d \n", QueueID);
- break;
+ default:
+ RT_TRACE(COMP_ERR, "TransmitTCB(): Impossible Queue Selection: %d \n", QueueID);
+ break;
}
return QueueSelect;
}
@@ -1921,39 +1921,39 @@ u8 MRateToHwRate8190Pci(u8 rate)
u8 ret = DESC90_RATE1M;
switch(rate) {
- case MGN_1M: ret = DESC90_RATE1M; break;
- case MGN_2M: ret = DESC90_RATE2M; break;
- case MGN_5_5M: ret = DESC90_RATE5_5M; break;
- case MGN_11M: ret = DESC90_RATE11M; break;
- case MGN_6M: ret = DESC90_RATE6M; break;
- case MGN_9M: ret = DESC90_RATE9M; break;
- case MGN_12M: ret = DESC90_RATE12M; break;
- case MGN_18M: ret = DESC90_RATE18M; break;
- case MGN_24M: ret = DESC90_RATE24M; break;
- case MGN_36M: ret = DESC90_RATE36M; break;
- case MGN_48M: ret = DESC90_RATE48M; break;
- case MGN_54M: ret = DESC90_RATE54M; break;
-
- // HT rate since here
- case MGN_MCS0: ret = DESC90_RATEMCS0; break;
- case MGN_MCS1: ret = DESC90_RATEMCS1; break;
- case MGN_MCS2: ret = DESC90_RATEMCS2; break;
- case MGN_MCS3: ret = DESC90_RATEMCS3; break;
- case MGN_MCS4: ret = DESC90_RATEMCS4; break;
- case MGN_MCS5: ret = DESC90_RATEMCS5; break;
- case MGN_MCS6: ret = DESC90_RATEMCS6; break;
- case MGN_MCS7: ret = DESC90_RATEMCS7; break;
- case MGN_MCS8: ret = DESC90_RATEMCS8; break;
- case MGN_MCS9: ret = DESC90_RATEMCS9; break;
- case MGN_MCS10: ret = DESC90_RATEMCS10; break;
- case MGN_MCS11: ret = DESC90_RATEMCS11; break;
- case MGN_MCS12: ret = DESC90_RATEMCS12; break;
- case MGN_MCS13: ret = DESC90_RATEMCS13; break;
- case MGN_MCS14: ret = DESC90_RATEMCS14; break;
- case MGN_MCS15: ret = DESC90_RATEMCS15; break;
- case (0x80|0x20): ret = DESC90_RATEMCS32; break;
-
- default: break;
+ case MGN_1M: ret = DESC90_RATE1M; break;
+ case MGN_2M: ret = DESC90_RATE2M; break;
+ case MGN_5_5M: ret = DESC90_RATE5_5M; break;
+ case MGN_11M: ret = DESC90_RATE11M; break;
+ case MGN_6M: ret = DESC90_RATE6M; break;
+ case MGN_9M: ret = DESC90_RATE9M; break;
+ case MGN_12M: ret = DESC90_RATE12M; break;
+ case MGN_18M: ret = DESC90_RATE18M; break;
+ case MGN_24M: ret = DESC90_RATE24M; break;
+ case MGN_36M: ret = DESC90_RATE36M; break;
+ case MGN_48M: ret = DESC90_RATE48M; break;
+ case MGN_54M: ret = DESC90_RATE54M; break;
+
+ // HT rate since here
+ case MGN_MCS0: ret = DESC90_RATEMCS0; break;
+ case MGN_MCS1: ret = DESC90_RATEMCS1; break;
+ case MGN_MCS2: ret = DESC90_RATEMCS2; break;
+ case MGN_MCS3: ret = DESC90_RATEMCS3; break;
+ case MGN_MCS4: ret = DESC90_RATEMCS4; break;
+ case MGN_MCS5: ret = DESC90_RATEMCS5; break;
+ case MGN_MCS6: ret = DESC90_RATEMCS6; break;
+ case MGN_MCS7: ret = DESC90_RATEMCS7; break;
+ case MGN_MCS8: ret = DESC90_RATEMCS8; break;
+ case MGN_MCS9: ret = DESC90_RATEMCS9; break;
+ case MGN_MCS10: ret = DESC90_RATEMCS10; break;
+ case MGN_MCS11: ret = DESC90_RATEMCS11; break;
+ case MGN_MCS12: ret = DESC90_RATEMCS12; break;
+ case MGN_MCS13: ret = DESC90_RATEMCS13; break;
+ case MGN_MCS14: ret = DESC90_RATEMCS14; break;
+ case MGN_MCS15: ret = DESC90_RATEMCS15; break;
+ case (0x80|0x20): ret = DESC90_RATEMCS32; break;
+
+ default: break;
}
return ret;
}
@@ -4364,66 +4364,66 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
switch (cmd) {
- case RTL_IOCTL_WPA_SUPPLICANT:
+ case RTL_IOCTL_WPA_SUPPLICANT:
//parse here for HW security
- if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION)
+ if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION)
+ {
+ if (ipw->u.crypt.set_tx)
{
- if (ipw->u.crypt.set_tx)
+ if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+ ieee->pairwise_key_type = KEY_TYPE_CCMP;
+ else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+ ieee->pairwise_key_type = KEY_TYPE_TKIP;
+ else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
{
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
- ieee->pairwise_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
- {
- if (ipw->u.crypt.key_len == 13)
- ieee->pairwise_key_type = KEY_TYPE_WEP104;
- else if (ipw->u.crypt.key_len == 5)
- ieee->pairwise_key_type = KEY_TYPE_WEP40;
- }
- else
- ieee->pairwise_key_type = KEY_TYPE_NA;
-
- if (ieee->pairwise_key_type)
- {
- memcpy((u8*)key, ipw->u.crypt.key, 16);
- EnableHWSecurityConfig8192(dev);
- //we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
- //added by WB.
- setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
- if (ieee->auth_mode != 2)
- setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
- }
+ if (ipw->u.crypt.key_len == 13)
+ ieee->pairwise_key_type = KEY_TYPE_WEP104;
+ else if (ipw->u.crypt.key_len == 5)
+ ieee->pairwise_key_type = KEY_TYPE_WEP40;
}
- else //if (ipw->u.crypt.idx) //group key use idx > 0
+ else
+ ieee->pairwise_key_type = KEY_TYPE_NA;
+
+ if (ieee->pairwise_key_type)
{
memcpy((u8*)key, ipw->u.crypt.key, 16);
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
- ieee->group_key_type= KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
- ieee->group_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
- {
- if (ipw->u.crypt.key_len == 13)
- ieee->group_key_type = KEY_TYPE_WEP104;
- else if (ipw->u.crypt.key_len == 5)
- ieee->group_key_type = KEY_TYPE_WEP40;
- }
- else
- ieee->group_key_type = KEY_TYPE_NA;
+ EnableHWSecurityConfig8192(dev);
+ //we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
+ //added by WB.
+ setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+ if (ieee->auth_mode != 2)
+ setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8*)ieee->ap_mac_addr, 0, key);
+ }
+ }
+ else //if (ipw->u.crypt.idx) //group key use idx > 0
+ {
+ memcpy((u8*)key, ipw->u.crypt.key, 16);
+ if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
+ ieee->group_key_type= KEY_TYPE_CCMP;
+ else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
+ ieee->group_key_type = KEY_TYPE_TKIP;
+ else if (strcmp(ipw->u.crypt.alg, "WEP") == 0)
+ {
+ if (ipw->u.crypt.key_len == 13)
+ ieee->group_key_type = KEY_TYPE_WEP104;
+ else if (ipw->u.crypt.key_len == 5)
+ ieee->group_key_type = KEY_TYPE_WEP40;
+ }
+ else
+ ieee->group_key_type = KEY_TYPE_NA;
- if (ieee->group_key_type)
- {
- setKey( dev,
- ipw->u.crypt.idx,
- ipw->u.crypt.idx, //KeyIndex
- ieee->group_key_type, //KeyType
- broadcast_addr, //MacAddr
- 0, //DefaultKey
- key); //KeyContent
- }
+ if (ieee->group_key_type)
+ {
+ setKey( dev,
+ ipw->u.crypt.idx,
+ ipw->u.crypt.idx, //KeyIndex
+ ieee->group_key_type, //KeyType
+ broadcast_addr, //MacAddr
+ 0, //DefaultKey
+ key); //KeyContent
}
}
+ }
#ifdef JOHN_HWSEC_DEBUG
//john's test 0711
printk("@@ wrq->u pointer = ");
@@ -4436,7 +4436,7 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
ret = ieee80211_wpa_supplicant_ioctl(priv->ieee80211, &wrq->u.data);
break;
- default:
+ default:
ret = -EOPNOTSUPP;
break;
}
@@ -4453,49 +4453,49 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
if(!bIsHT) {
switch(rate) {
- case DESC90_RATE1M: ret_rate = MGN_1M; break;
- case DESC90_RATE2M: ret_rate = MGN_2M; break;
- case DESC90_RATE5_5M: ret_rate = MGN_5_5M; break;
- case DESC90_RATE11M: ret_rate = MGN_11M; break;
- case DESC90_RATE6M: ret_rate = MGN_6M; break;
- case DESC90_RATE9M: ret_rate = MGN_9M; break;
- case DESC90_RATE12M: ret_rate = MGN_12M; break;
- case DESC90_RATE18M: ret_rate = MGN_18M; break;
- case DESC90_RATE24M: ret_rate = MGN_24M; break;
- case DESC90_RATE36M: ret_rate = MGN_36M; break;
- case DESC90_RATE48M: ret_rate = MGN_48M; break;
- case DESC90_RATE54M: ret_rate = MGN_54M; break;
-
- default:
- ret_rate = 0xff;
- RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
- break;
+ case DESC90_RATE1M: ret_rate = MGN_1M; break;
+ case DESC90_RATE2M: ret_rate = MGN_2M; break;
+ case DESC90_RATE5_5M: ret_rate = MGN_5_5M; break;
+ case DESC90_RATE11M: ret_rate = MGN_11M; break;
+ case DESC90_RATE6M: ret_rate = MGN_6M; break;
+ case DESC90_RATE9M: ret_rate = MGN_9M; break;
+ case DESC90_RATE12M: ret_rate = MGN_12M; break;
+ case DESC90_RATE18M: ret_rate = MGN_18M; break;
+ case DESC90_RATE24M: ret_rate = MGN_24M; break;
+ case DESC90_RATE36M: ret_rate = MGN_36M; break;
+ case DESC90_RATE48M: ret_rate = MGN_48M; break;
+ case DESC90_RATE54M: ret_rate = MGN_54M; break;
+
+ default:
+ ret_rate = 0xff;
+ RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
+ break;
}
} else {
switch(rate) {
- case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break;
- case DESC90_RATEMCS1: ret_rate = MGN_MCS1; break;
- case DESC90_RATEMCS2: ret_rate = MGN_MCS2; break;
- case DESC90_RATEMCS3: ret_rate = MGN_MCS3; break;
- case DESC90_RATEMCS4: ret_rate = MGN_MCS4; break;
- case DESC90_RATEMCS5: ret_rate = MGN_MCS5; break;
- case DESC90_RATEMCS6: ret_rate = MGN_MCS6; break;
- case DESC90_RATEMCS7: ret_rate = MGN_MCS7; break;
- case DESC90_RATEMCS8: ret_rate = MGN_MCS8; break;
- case DESC90_RATEMCS9: ret_rate = MGN_MCS9; break;
- case DESC90_RATEMCS10: ret_rate = MGN_MCS10; break;
- case DESC90_RATEMCS11: ret_rate = MGN_MCS11; break;
- case DESC90_RATEMCS12: ret_rate = MGN_MCS12; break;
- case DESC90_RATEMCS13: ret_rate = MGN_MCS13; break;
- case DESC90_RATEMCS14: ret_rate = MGN_MCS14; break;
- case DESC90_RATEMCS15: ret_rate = MGN_MCS15; break;
- case DESC90_RATEMCS32: ret_rate = (0x80|0x20); break;
-
- default:
- ret_rate = 0xff;
- RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT);
- break;
+ case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break;
+ case DESC90_RATEMCS1: ret_rate = MGN_MCS1; break;
+ case DESC90_RATEMCS2: ret_rate = MGN_MCS2; break;
+ case DESC90_RATEMCS3: ret_rate = MGN_MCS3; break;
+ case DESC90_RATEMCS4: ret_rate = MGN_MCS4; break;
+ case DESC90_RATEMCS5: ret_rate = MGN_MCS5; break;
+ case DESC90_RATEMCS6: ret_rate = MGN_MCS6; break;
+ case DESC90_RATEMCS7: ret_rate = MGN_MCS7; break;
+ case DESC90_RATEMCS8: ret_rate = MGN_MCS8; break;
+ case DESC90_RATEMCS9: ret_rate = MGN_MCS9; break;
+ case DESC90_RATEMCS10: ret_rate = MGN_MCS10; break;
+ case DESC90_RATEMCS11: ret_rate = MGN_MCS11; break;
+ case DESC90_RATEMCS12: ret_rate = MGN_MCS12; break;
+ case DESC90_RATEMCS13: ret_rate = MGN_MCS13; break;
+ case DESC90_RATEMCS14: ret_rate = MGN_MCS14; break;
+ case DESC90_RATEMCS15: ret_rate = MGN_MCS15; break;
+ case DESC90_RATEMCS32: ret_rate = (0x80|0x20); break;
+
+ default:
+ ret_rate = 0xff;
+ RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n",rate, bIsHT);
+ break;
}
}
@@ -5696,25 +5696,25 @@ void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
info = (struct rtl8192_rx_info *)skb->cb;
switch (info->out_pipe) {
/* Nomal packet pipe */
- case 3:
- //RT_TRACE(COMP_RECV, "normal in-pipe index(%d)\n",info->out_pipe);
- priv->IrpPendingCount--;
- rtl8192_rx_nomal(skb);
- break;
+ case 3:
+ //RT_TRACE(COMP_RECV, "normal in-pipe index(%d)\n",info->out_pipe);
+ priv->IrpPendingCount--;
+ rtl8192_rx_nomal(skb);
+ break;
- /* Command packet pipe */
- case 9:
- RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",\
- info->out_pipe);
+ /* Command packet pipe */
+ case 9:
+ RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",\
+ info->out_pipe);
- rtl8192_rx_cmd(skb);
- break;
+ rtl8192_rx_cmd(skb);
+ break;
- default: /* should never get here! */
- RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",\
- info->out_pipe);
- dev_kfree_skb(skb);
- break;
+ default: /* should never get here! */
+ RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",\
+ info->out_pipe);
+ dev_kfree_skb(skb);
+ break;
}
}
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index c1ab5cf..c904aa8 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -710,12 +710,12 @@ static int r8192_wx_set_enc(struct net_device *dev,
#define CONF_WEP104 0x14
switch(wrqu->encoding.flags & IW_ENCODE_INDEX){
- case 0: key_idx = ieee->tx_keyidx; break;
- case 1: key_idx = 0; break;
- case 2: key_idx = 1; break;
- case 3: key_idx = 2; break;
- case 4: key_idx = 3; break;
- default: break;
+ case 0: key_idx = ieee->tx_keyidx; break;
+ case 1: key_idx = 0; break;
+ case 2: key_idx = 1; break;
+ case 3: key_idx = 2; break;
+ case 4: key_idx = 3; break;
+ default: break;
}
if(wrqu->encoding.length==0x5){
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 46b8043..573e9cd 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -334,56 +334,56 @@ bool init_firmware(struct net_device *dev)
}
switch(init_step) {
- case FW_INIT_STEP0_BOOT:
- /* Download boot
- * initialize command descriptor.
- * will set polling bit when firmware code is also configured
- */
- pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
+ case FW_INIT_STEP0_BOOT:
+ /* Download boot
+ * initialize command descriptor.
+ * will set polling bit when firmware code is also configured
+ */
+ pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
#ifdef RTL8190P
- // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
- rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
- if(rt_status != true)
- {
- RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
- goto download_firmware_fail;
- }
+ // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
+ rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
+ if(rt_status != true)
+ {
+ RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
+ goto download_firmware_fail;
+ }
#endif
- //mdelay(1000);
- /*
- * To initialize IMEM, CPU move code from 0x80000080,
- * hence, we send 0x80 byte packet
- */
- break;
-
- case FW_INIT_STEP1_MAIN:
- /* Download firmware code. Wait until Boot Ready and Turn on CPU */
- pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
-
- /* Check Put Code OK and Turn On CPU */
- rt_status = CPUcheck_maincodeok_turnonCPU(dev);
- if(rt_status != TRUE) {
- RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
- goto download_firmware_fail;
- }
-
- pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
- break;
-
- case FW_INIT_STEP2_DATA:
- /* download initial data code */
- pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
- mdelay(1);
-
- rt_status = CPUcheck_firmware_ready(dev);
- if(rt_status != TRUE) {
- RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
- goto download_firmware_fail;
- }
-
- /* wait until data code is initialized ready.*/
- pfirmware->firmware_status = FW_STATUS_5_READY;
- break;
+ //mdelay(1000);
+ /*
+ * To initialize IMEM, CPU move code from 0x80000080,
+ * hence, we send 0x80 byte packet
+ */
+ break;
+
+ case FW_INIT_STEP1_MAIN:
+ /* Download firmware code. Wait until Boot Ready and Turn on CPU */
+ pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
+
+ /* Check Put Code OK and Turn On CPU */
+ rt_status = CPUcheck_maincodeok_turnonCPU(dev);
+ if(rt_status != TRUE) {
+ RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
+ goto download_firmware_fail;
+ }
+
+ pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
+ break;
+
+ case FW_INIT_STEP2_DATA:
+ /* download initial data code */
+ pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
+ mdelay(1);
+
+ rt_status = CPUcheck_firmware_ready(dev);
+ if(rt_status != TRUE) {
+ RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
+ goto download_firmware_fail;
+ }
+
+ /* wait until data code is initialized ready.*/
+ pfirmware->firmware_status = FW_STATUS_5_READY;
+ break;
}
}
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 2ff851f..17fac41 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -957,56 +957,56 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
u8 ret = 0;
switch(eRFPath){
- case RF90_PATH_A:
- for(i = 0;i<RadioA_ArrayLength; i=i+2){
-
- if(rtl819XRadioA_Array[i] == 0xfe){
- mdelay(100);
- continue;
- }
- rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]);
- mdelay(1);
+ case RF90_PATH_A:
+ for(i = 0;i<RadioA_ArrayLength; i=i+2){
+ if(rtl819XRadioA_Array[i] == 0xfe){
+ mdelay(100);
+ continue;
}
- break;
- case RF90_PATH_B:
- for(i = 0;i<RadioB_ArrayLength; i=i+2){
+ rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]);
+ mdelay(1);
- if(rtl819XRadioB_Array[i] == 0xfe){
- mdelay(100);
- continue;
- }
- rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]);
- mdelay(1);
+ }
+ break;
+ case RF90_PATH_B:
+ for(i = 0;i<RadioB_ArrayLength; i=i+2){
+ if(rtl819XRadioB_Array[i] == 0xfe){
+ mdelay(100);
+ continue;
}
- break;
- case RF90_PATH_C:
- for(i = 0;i<RadioC_ArrayLength; i=i+2){
+ rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]);
+ mdelay(1);
- if(rtl819XRadioC_Array[i] == 0xfe){
- mdelay(100);
- continue;
- }
- rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]);
- mdelay(1);
+ }
+ break;
+ case RF90_PATH_C:
+ for(i = 0;i<RadioC_ArrayLength; i=i+2){
+ if(rtl819XRadioC_Array[i] == 0xfe){
+ mdelay(100);
+ continue;
}
- break;
- case RF90_PATH_D:
- for(i = 0;i<RadioD_ArrayLength; i=i+2){
+ rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]);
+ mdelay(1);
- if(rtl819XRadioD_Array[i] == 0xfe){
- mdelay(100);
- continue;
- }
- rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]);
- mdelay(1);
+ }
+ break;
+ case RF90_PATH_D:
+ for(i = 0;i<RadioD_ArrayLength; i=i+2){
+ if(rtl819XRadioD_Array[i] == 0xfe){
+ mdelay(100);
+ continue;
}
- break;
- default:
- break;
+ rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]);
+ mdelay(1);
+
+ }
+ break;
+ default:
+ break;
}
return ret;
--
1.7.10.4
next prev parent reply other threads:[~2012-12-05 20:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-05 20:40 [PATCH 0/6] staging:rtl8192u: begin cleanup of some checkpatch errors Sebastian Hahn
2012-12-05 20:40 ` [PATCH 1/6] staging/rtl8192u: cleanfile run Sebastian Hahn
2012-12-05 20:40 ` [PATCH 2/6] staging/rtl8192u: put { on same line as struct Sebastian Hahn
2012-12-05 20:40 ` [PATCH 3/6] staging/rtl8192u: indent with tabs, not spaces Sebastian Hahn
2012-12-06 7:01 ` Dan Carpenter
2012-12-06 11:23 ` [PATCH 3/6 v2] " Sebastian Hahn
2012-12-06 12:55 ` devendra.aaru
2012-12-05 20:40 ` [PATCH 4/6] staging/rtl8192u: don't init globals to 0 or NULL Sebastian Hahn
2012-12-05 20:40 ` Sebastian Hahn [this message]
2012-12-05 20:40 ` [PATCH 6/6] staging/rtl8192u: do not init statics to 0 Sebastian Hahn
2012-12-14 17:00 ` [PATCH 0/6] staging:rtl8192u: begin cleanup of some checkpatch errors Jennifer Naumann
2012-12-14 16:58 ` Dan Carpenter
2012-12-14 23:31 ` Jennifer Naumann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354740023-30849-6-git-send-email-snsehahn@cip.cs.fau.de \
--to=snsehahn@cip.cs.fau.de \
--cc=Jennifer.Naumann@informatik.stud.uni-erlangen.de \
--cc=Julia.Lawall@lip6.fr \
--cc=adam.buchbinder@gmail.com \
--cc=amwang@redhat.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jim.cromie@gmail.com \
--cc=jkosina@suse.cz \
--cc=joe@perches.com \
--cc=justinmattock@gmail.com \
--cc=linux-kernel@i4.informatik.uni-erlangen.de \
--cc=linux-kernel@vger.kernel.org \
--cc=standby24x7@gmail.com \
--cc=wfp5p@virginia.edu \
--cc=yongjun_wei@trendmicro.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).