From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753306Ab2LPRrI (ORCPT ); Sun, 16 Dec 2012 12:47:08 -0500 Received: from mga02.intel.com ([134.134.136.20]:2911 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752773Ab2LPRpw (ORCPT ); Sun, 16 Dec 2012 12:45:52 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.84,294,1355126400"; d="scan'208";a="234790717" From: "Fenghua Yu" To: "H Peter Anvin" , "Ingo Molnar" , "Thomas Gleixner" , "Asit K Mallick" , "Tigran Aivazian" , "Andreas Herrmann" , "Borislav Petkov" , "Yinghai Lu" , "linux-kernel" , "x86" Cc: "Fenghua Yu" Subject: [PATCH v3 06/10] x86/microcode_intel_early.c: Early update ucode on Intel's CPU Date: Sun, 16 Dec 2012 02:43:25 -0800 Message-Id: <1355654609-16800-7-git-send-email-fenghua.yu@intel.com> X-Mailer: git-send-email 1.7.2 In-Reply-To: <1355654609-16800-1-git-send-email-fenghua.yu@intel.com> References: <1355654609-16800-1-git-send-email-fenghua.yu@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Fenghua Yu Implementation of early update ucode on Intel's CPU. load_ucode_intel_bsp() scans ucode in initrd image file which is a cpio format ucode followed by ordinary initrd image file. The binary ucode file is stored in kernel/x86/microcode/GenuineIntel.bin in the cpio data. All ucode patches with the same model as BSP are saved in memory. A matching ucode patch is updated on BSP. load_ucode_intel_ap() reads saved ucoded patches and updates ucode on AP. Signed-off-by: Fenghua Yu --- arch/x86/kernel/microcode_intel_early.c | 775 ++++++++++++++++++++++++++++++++ 1 file changed, 775 insertions(+) create mode 100644 arch/x86/kernel/microcode_intel_early.c diff --git a/arch/x86/kernel/microcode_intel_early.c b/arch/x86/kernel/microcode_intel_early.c new file mode 100644 index 0000000..6a8e04b --- /dev/null +++ b/arch/x86/kernel/microcode_intel_early.c @@ -0,0 +1,775 @@ +/* + * Intel CPU microcode early update for Linux + * + * Copyright (C) 2012 Fenghua Yu + * H Peter Anvin" + * + * This allows to early upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 9.11 of Volume 3, IA-32 Intel Architecture + * Software Developer's Manual. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +unsigned long mc_saved_in_initrd[MAX_UCODE_COUNT]; +struct mc_saved_data { + unsigned int mc_saved_count; + struct microcode_intel **mc_saved; +} mc_saved_data; + +static enum ucode_state __cpuinit +generic_load_microcode_early(struct microcode_intel **mc_saved_p, + unsigned int mc_saved_count, + struct ucode_cpu_info *uci) +{ + struct microcode_intel *ucode_ptr, *new_mc = NULL; + int new_rev = uci->cpu_sig.rev; + enum ucode_state state = UCODE_OK; + unsigned int mc_size; + struct microcode_header_intel *mc_header; + unsigned int csig = uci->cpu_sig.sig; + unsigned int cpf = uci->cpu_sig.pf; + int i; + + for (i = 0; i < mc_saved_count; i++) { + ucode_ptr = mc_saved_p[i]; + + mc_header = (struct microcode_header_intel *)ucode_ptr; + mc_size = get_totalsize(mc_header); + if (get_matching_microcode(csig, cpf, ucode_ptr, new_rev)) { + new_rev = mc_header->rev; + new_mc = ucode_ptr; + } + } + + if (!new_mc) { + state = UCODE_NFOUND; + goto out; + } + + uci->mc = (struct microcode_intel *)new_mc; +out: + return state; +} + +static void __cpuinit +microcode_pointer(struct microcode_intel **mc_saved, + unsigned long *mc_saved_in_initrd, + unsigned long initrd_start, int mc_saved_count) +{ + int i; + + for (i = 0; i < mc_saved_count; i++) + mc_saved[i] = (struct microcode_intel *) + (mc_saved_in_initrd[i] + initrd_start); +} + +#ifdef CONFIG_X86_32 +static void __cpuinit +microcode_phys(struct microcode_intel **mc_saved_tmp, + struct mc_saved_data *mc_saved_data) +{ + int i; + struct microcode_intel ***mc_saved; + + mc_saved = (struct microcode_intel ***) + __pa_symbol(&mc_saved_data->mc_saved); + for (i = 0; i < mc_saved_data->mc_saved_count; i++) { + struct microcode_intel *p; + + p = *(struct microcode_intel **) + __pa(mc_saved_data->mc_saved + i); + mc_saved_tmp[i] = (struct microcode_intel *)__pa(p); + } +} +#endif + +static enum ucode_state __cpuinit +load_microcode(struct mc_saved_data *mc_saved_data, + unsigned long *mc_saved_in_initrd, + unsigned long initrd_start, + struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT]; + unsigned int count = mc_saved_data->mc_saved_count; + + if (!mc_saved_data->mc_saved) { + microcode_pointer(mc_saved_tmp, mc_saved_in_initrd, + initrd_start, count); + + return generic_load_microcode_early(mc_saved_tmp, count, uci); + } else { +#ifdef CONFIG_X86_32 + microcode_phys(mc_saved_tmp, mc_saved_data); + return generic_load_microcode_early(mc_saved_tmp, count, uci); +#else + return generic_load_microcode_early(mc_saved_data->mc_saved, + count, uci); +#endif + } +} + +static u8 get_x86_family(unsigned long sig) +{ + u8 x86; + + x86 = (sig >> 8) & 0xf; + + if (x86 == 0xf) + x86 += (sig >> 20) & 0xff; + + return x86; +} + +static u8 get_x86_model(unsigned long sig) +{ + u8 x86, x86_model; + + x86 = get_x86_family(sig); + x86_model = (sig >> 4) & 0xf; + + if (x86 == 0x6 || x86 == 0xf) + x86_model += ((sig >> 16) & 0xf) << 4; + + return x86_model; +} + +/* + * Given CPU signature and a microcode patch, this function finds if the + * microcode patch has matching family and model with the CPU. + */ +static enum ucode_state +matching_model_microcode(struct microcode_header_intel *mc_header, + unsigned long sig) +{ + u8 x86, x86_model; + u8 x86_ucode, x86_model_ucode; + struct extended_sigtable *ext_header; + unsigned long total_size = get_totalsize(mc_header); + unsigned long data_size = get_datasize(mc_header); + int ext_sigcount, i; + struct extended_signature *ext_sig; + + x86 = get_x86_family(sig); + x86_model = get_x86_model(sig); + + x86_ucode = get_x86_family(mc_header->sig); + x86_model_ucode = get_x86_model(mc_header->sig); + + if (x86 == x86_ucode && x86_model == x86_model_ucode) + return UCODE_OK; + + /* Look for ext. headers: */ + if (total_size <= data_size + MC_HEADER_SIZE) + return UCODE_NFOUND; + + ext_header = (struct extended_sigtable *) + mc_header + data_size + MC_HEADER_SIZE; + ext_sigcount = ext_header->count; + ext_sig = (void *)ext_header + EXT_HEADER_SIZE; + + for (i = 0; i < ext_sigcount; i++) { + x86_ucode = get_x86_family(ext_sig->sig); + x86_model_ucode = get_x86_model(ext_sig->sig); + + if (x86 == x86_ucode && x86_model == x86_model_ucode) + return UCODE_OK; + + ext_sig++; + } + + return UCODE_NFOUND; +} + +static int +save_microcode(struct mc_saved_data *mc_saved_data, + struct microcode_intel **mc_saved_src, + unsigned int mc_saved_count) +{ + int i, j; + struct microcode_intel **mc_saved_p; + int ret; + + if (!mc_saved_count) + return -EINVAL; + + /* + * Copy new microcode data. + */ + mc_saved_p = kmalloc(mc_saved_count*sizeof(struct microcode_intel *), + GFP_KERNEL); + if (!mc_saved_p) + return -ENOMEM; + + for (i = 0; i < mc_saved_count; i++) { + struct microcode_intel *mc = mc_saved_src[i]; + struct microcode_header_intel *mc_header = &mc->hdr; + unsigned long mc_size = get_totalsize(mc_header); + mc_saved_p[i] = kmalloc(mc_size, GFP_KERNEL); + if (!mc_saved_p[i]) { + ret = -ENOMEM; + goto err; + } + if (!mc_saved_src[i]) { + ret = -EINVAL; + goto err; + } + memcpy(mc_saved_p[i], mc, mc_size); + } + + /* + * Point to newly saved microcode. + */ + mc_saved_data->mc_saved = mc_saved_p; + mc_saved_data->mc_saved_count = mc_saved_count; + + return 0; + +err: + for (j = 0; j <= i; j++) + kfree(mc_saved_p[j]); + kfree(mc_saved_p); + + return ret; +} + +/* + * A microcode patch in ucode_ptr is saved into mc_saved + * - if it has matching signature and newer revision compared to an existing + * patch mc_saved. + * - or if it is a newly discovered microcode patch. + * + * The microcode patch should have matching model with CPU. + */ +static void _save_mc(struct microcode_intel **mc_saved, u8 *ucode_ptr, + unsigned int *mc_saved_count_p) +{ + int i; + int found = 0; + unsigned int mc_saved_count = *mc_saved_count_p; + struct microcode_header_intel *mc_header; + + mc_header = (struct microcode_header_intel *)ucode_ptr; + for (i = 0; i < mc_saved_count; i++) { + unsigned int sig, pf; + unsigned int new_rev; + struct microcode_header_intel *mc_saved_header = + (struct microcode_header_intel *)mc_saved[i]; + sig = mc_saved_header->sig; + pf = mc_saved_header->pf; + new_rev = mc_header->rev; + + if (get_matching_sig(sig, pf, ucode_ptr, new_rev)) { + found = 1; + if (update_match_revision(mc_header, new_rev)) { + /* + * Found an older ucode saved before. + * Replace the older one with this newer + * one. + */ + mc_saved[i] = + (struct microcode_intel *)ucode_ptr; + break; + } + } + } + if (i >= mc_saved_count && !found) + /* + * This ucode is first time discovered in ucode file. + * Save it to memory. + */ + mc_saved[mc_saved_count++] = + (struct microcode_intel *)ucode_ptr; + + *mc_saved_count_p = mc_saved_count; +} + +/* + * Get microcode matching with BSP's model. Only CPUs with the same model as + * BSP can stay in the platform. + */ +static enum ucode_state __init +get_matching_model_microcode(int cpu, unsigned long start, + void *data, size_t size, + struct mc_saved_data *mc_saved_data, + unsigned long *mc_saved_in_initrd, + struct ucode_cpu_info *uci) +{ + u8 *ucode_ptr = data; + unsigned int leftover = size; + enum ucode_state state = UCODE_OK; + unsigned int mc_size; + struct microcode_header_intel *mc_header; + struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT]; + unsigned int mc_saved_count = mc_saved_data->mc_saved_count; + int i; + + while (leftover) { + mc_header = (struct microcode_header_intel *)ucode_ptr; + + mc_size = get_totalsize(mc_header); + if (!mc_size || mc_size > leftover || + microcode_sanity_check(ucode_ptr, 0) < 0) + break; + + leftover -= mc_size; + + /* + * Since APs with same family and model as the BSP may boot in + * the platform, we need to find and save microcode patches + * with the same family and model as the BSP. + */ + if (matching_model_microcode(mc_header, uci->cpu_sig.sig) != + UCODE_OK) { + ucode_ptr += mc_size; + continue; + } + + _save_mc(mc_saved_tmp, ucode_ptr, &mc_saved_count); + + ucode_ptr += mc_size; + } + + if (leftover) { + state = UCODE_ERROR; + goto out; + } + + if (mc_saved_count == 0) { + state = UCODE_NFOUND; + goto out; + } + + for (i = 0; i < mc_saved_count; i++) + mc_saved_in_initrd[i] = (unsigned long)mc_saved_tmp[i] - start; + + mc_saved_data->mc_saved_count = mc_saved_count; +out: + return state; +} + +#define native_rdmsr(msr, val1, val2) \ +do { \ + u64 __val = native_read_msr((msr)); \ + (void)((val1) = (u32)__val); \ + (void)((val2) = (u32)(__val >> 32)); \ +} while (0) + +#define native_wrmsr(msr, low, high) \ + native_write_msr(msr, low, high); + +static int __cpuinit collect_cpu_info_early(struct ucode_cpu_info *uci) +{ + unsigned int val[2]; + u8 x86, x86_model; + struct cpu_signature csig; + unsigned int eax, ebx, ecx, edx; + + csig.sig = 0; + csig.pf = 0; + csig.rev = 0; + + memset(uci, 0, sizeof(*uci)); + + eax = 0x00000001; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + csig.sig = eax; + + x86 = get_x86_family(csig.sig); + x86_model = get_x86_model(csig.sig); + + if ((x86_model >= 5) || (x86 > 6)) { + /* get processor flags from MSR 0x17 */ + native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + csig.pf = 1 << ((val[1] >> 18) & 7); + } + native_wrmsr(MSR_IA32_UCODE_REV, 0, 0); + + /* As documented in the SDM: Do a CPUID 1 here */ + sync_core(); + + /* get the current revision from MSR 0x8B */ + native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + + csig.rev = val[1]; + + uci->cpu_sig = csig; + uci->valid = 1; + + return 0; +} + +#ifdef DEBUG +static void __ref show_saved_mc(void) +{ + int i, j; + unsigned int sig, pf, rev, total_size, data_size, date; + struct ucode_cpu_info uci; + + if (mc_saved_data.mc_saved_count == 0) { + pr_debug("no micorcode data saved.\n"); + return; + } + pr_debug("Total microcode saved: %d\n", mc_saved_data.mc_saved_count); + + collect_cpu_info_early(&uci); + + sig = uci.cpu_sig.sig; + pf = uci.cpu_sig.pf; + rev = uci.cpu_sig.rev; + pr_debug("CPU%d: sig=0x%x, pf=0x%x, rev=0x%x\n", + smp_processor_id(), sig, pf, rev); + + for (i = 0; i < mc_saved_data.mc_saved_count; i++) { + struct microcode_header_intel *mc_saved_header; + struct extended_sigtable *ext_header; + int ext_sigcount; + struct extended_signature *ext_sig; + + mc_saved_header = (struct microcode_header_intel *) + mc_saved_data.mc_saved[i]; + sig = mc_saved_header->sig; + pf = mc_saved_header->pf; + rev = mc_saved_header->rev; + total_size = get_totalsize(mc_saved_header); + data_size = get_datasize(mc_saved_header); + date = mc_saved_header->date; + + pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, toal size=0x%x, date = %04x-%02x-%02x\n", + i, sig, pf, rev, total_size, + date & 0xffff, + date >> 24, + (date >> 16) & 0xff); + + /* Look for ext. headers: */ + if (total_size <= data_size + MC_HEADER_SIZE) + continue; + + ext_header = (struct extended_sigtable *) + mc_saved_header + data_size + MC_HEADER_SIZE; + ext_sigcount = ext_header->count; + ext_sig = (void *)ext_header + EXT_HEADER_SIZE; + + for (j = 0; j < ext_sigcount; j++) { + sig = ext_sig->sig; + pf = ext_sig->pf; + + pr_debug("\tExtended[%d]: sig=0x%x, pf=0x%x\n", + j, sig, pf); + + ext_sig++; + } + + } +} +#else +static inline void show_saved_mc(void) +{ +} +#endif + +#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU) +/* + * Save this mc into mc_saved_data. So it will be loaded early when a CPU is + * hot added or resumes. + * + * Please make sure this mc should be a valid microcode patch before calling + * this function. + */ +int save_mc_for_early(u8 *mc) +{ + struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT]; + unsigned int mc_saved_count_init; + unsigned int mc_saved_count; + struct microcode_intel **mc_saved; + int ret = 0; + int i; + + /* + * Hold hotplug lock so mc_saved_data is not accessed by a CPU in + * hotplug. + */ + cpu_hotplug_driver_lock(); + + mc_saved_count_init = mc_saved_data.mc_saved_count; + mc_saved_count = mc_saved_data.mc_saved_count; + mc_saved = mc_saved_data.mc_saved; + + if (mc_saved && mc_saved_count) + memcpy(mc_saved_tmp, mc_saved, + mc_saved_count * sizeof(struct mirocode_intel *)); + /* + * Save the microcode patch mc in mc_save_tmp structure if it's a newer + * version. + */ + + _save_mc(mc_saved_tmp, mc, &mc_saved_count); + + /* + * Save the mc_save_tmp in global mc_saved_data. + */ + ret = save_microcode(&mc_saved_data, mc_saved_tmp, mc_saved_count); + if (ret) { + pr_err("Can not save microcode patch.\n"); + goto out; + } + + show_saved_mc(); + + /* + * Free old saved microcod data. + */ + if (mc_saved) { + for (i = 0; i < mc_saved_count_init; i++) + kfree(mc_saved[i]); + kfree(mc_saved); + } + +out: + cpu_hotplug_driver_unlock(); + + return ret; +} +EXPORT_SYMBOL_GPL(save_mc_for_early); +#endif + +static __initdata char ucode_name[] = "kernel/x86/microcode/GenuineIntel.bin"; +static __init enum ucode_state +scan_microcode(unsigned long start, unsigned long end, + struct mc_saved_data *mc_saved_data, + unsigned long *mc_saved_in_initrd, + struct ucode_cpu_info *uci) +{ + unsigned int size = end - start + 1; + struct cpio_data cd; + long offset = 0; + char *p = (char *)__pa_symbol(&ucode_name); + + cd.data = NULL; + cd.size = 0; + + cd = find_cpio_data(p, (void *)start, size, &offset); + if (!cd.data) + return UCODE_ERROR; + + + return get_matching_model_microcode(0, start, cd.data, cd.size, + mc_saved_data, mc_saved_in_initrd, + uci); +} + +/* + * Print ucode update info. + */ +static void __cpuinit +print_ucode_info(struct ucode_cpu_info *uci, unsigned int date) +{ + int cpu = smp_processor_id(); + + pr_info("CPU%d microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n", + cpu, + uci->cpu_sig.rev, + date & 0xffff, + date >> 24, + (date >> 16) & 0xff); +} + +#ifdef CONFIG_X86_32 + +static int delay_ucode_info; +static int current_mc_date; + +/* + * Print early updated ucode info after printk works. This is delayed info dump. + */ +void __cpuinit show_ucode_info_early(void) +{ + struct ucode_cpu_info uci; + + if (delay_ucode_info) { + collect_cpu_info_early(&uci); + print_ucode_info(&uci, current_mc_date); + delay_ucode_info = 0; + } +} + +/* + * At this point, we can not call printk() yet. Keep microcode patch number in + * mc_saved_data.mc_saved and delay printing microcode info in + * show_ucode_info_early() until printk() works. + */ +static void __cpuinit print_ucode(struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc_intel; + int *delay_ucode_info_p; + int *current_mc_date_p; + + mc_intel = uci->mc; + if (mc_intel == NULL) + return; + + delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info); + current_mc_date_p = (int *)__pa_symbol(¤t_mc_date); + + *delay_ucode_info_p = 1; + *current_mc_date_p = mc_intel->hdr.date; +} +#else +static inline void __cpuinit print_ucode(struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc_intel; + + mc_intel = uci->mc; + if (mc_intel == NULL) + return; + + print_ucode_info(uci, mc_intel->hdr.date); +} +#endif + +static int apply_microcode_early(struct mc_saved_data *mc_saved_data, + struct ucode_cpu_info *uci) +{ + struct microcode_intel *mc_intel; + unsigned int val[2]; + + mc_intel = uci->mc; + if (mc_intel == NULL) + return 0; + + /* write microcode via MSR 0x79 */ + native_wrmsr(MSR_IA32_UCODE_WRITE, + (unsigned long) mc_intel->bits, + (unsigned long) mc_intel->bits >> 16 >> 16); + native_wrmsr(MSR_IA32_UCODE_REV, 0, 0); + + /* As documented in the SDM: Do a CPUID 1 here */ + sync_core(); + + /* get the current revision from MSR 0x8B */ + native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + if (val[1] != mc_intel->hdr.rev) + return -1; + + uci->cpu_sig.rev = val[1]; + + print_ucode(uci); + + return 0; +} + +/* + * This function converts microcode patch offsets previously stored in + * mc_saved_in_initrd to pointers and stores the pointers in mc_saved_data. + */ +int __init save_microcode_in_initrd(void) +{ + unsigned int count = mc_saved_data.mc_saved_count; + struct microcode_intel *mc_saved[MAX_UCODE_COUNT]; + int ret = 0; + + if (count == 0) + return ret; + + microcode_pointer(mc_saved, mc_saved_in_initrd, initrd_start, count); + ret = save_microcode(&mc_saved_data, mc_saved, count); + if (ret) + pr_err("Can not save microcod patches from initrd"); + + show_saved_mc(); + + return ret; +} + +static void __init +_load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data, + unsigned long *mc_saved_in_initrd, + unsigned long initrd_start_early, + unsigned long initrd_end_early, + struct ucode_cpu_info *uci) +{ + collect_cpu_info_early(uci); + scan_microcode(initrd_start_early, initrd_end_early, mc_saved_data, + mc_saved_in_initrd, uci); + load_microcode(mc_saved_data, mc_saved_in_initrd, + initrd_start_early, uci); + apply_microcode_early(mc_saved_data, uci); +} + +void __init +load_ucode_intel_bsp(char *real_mode_data) +{ + u64 ramdisk_image, ramdisk_size, ramdisk_end; + unsigned long initrd_start_early, initrd_end_early; + struct boot_params *boot_params; + struct ucode_cpu_info uci; + + boot_params = (struct boot_params *)real_mode_data; + ramdisk_image = boot_params->hdr.ramdisk_image; + ramdisk_size = boot_params->hdr.ramdisk_size; + +#ifdef CONFIG_X86_64 + ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); + initrd_start_early = ramdisk_image + PAGE_OFFSET; + initrd_end_early = initrd_start_early + ramdisk_size; + _load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd, + initrd_start_early, initrd_end_early, &uci); +#else + ramdisk_end = ramdisk_image + ramdisk_size; + initrd_start_early = ramdisk_image; + initrd_end_early = initrd_start_early + ramdisk_size; + _load_ucode_intel_bsp( + (struct mc_saved_data *)__pa_symbol(&mc_saved_data), + (unsigned long *)__pa_symbol(&mc_saved_in_initrd), + initrd_start_early, initrd_end_early, &uci); +#endif +} + +void __cpuinit load_ucode_intel_ap(void) +{ + struct mc_saved_data *mc_saved_data_p; + struct ucode_cpu_info uci; + unsigned long *mc_saved_in_initrd_p; + unsigned long initrd_start_addr; + +#ifdef CONFIG_X86_64 + mc_saved_data_p = &mc_saved_data; + mc_saved_in_initrd_p = mc_saved_in_initrd; + initrd_start_addr = initrd_start; +#else + unsigned long *initrd_start_p; + + mc_saved_in_initrd_p = + (unsigned long *)__pa_symbol(mc_saved_in_initrd); + mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data); + initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start); + initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p); +#endif + /* + * If there is no valid ucode previously saved in memory, no need to + * update ucode on this AP. + */ + if (mc_saved_data_p->mc_saved_count == 0) + return; + + collect_cpu_info_early(&uci); + load_microcode(mc_saved_data_p, mc_saved_in_initrd_p, + initrd_start_addr, &uci); + apply_microcode_early(mc_saved_data_p, &uci); +} -- 1.8.0.1