linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <rob.herring@calxeda.com>, <rob@landley.net>, <tony@atomide.com>,
	<balbi@ti.com>, <b-cousson@ti.com>, <rnayak@ti.com>,
	<linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-doc@vger.kernel.org>,
	<devicetree-discuss@lists.ozlabs.org>
Cc: <grant.likely@secretlab.ca>, <linux@arm.linux.org.uk>, <kishon@ti.com>
Subject: [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data
Date: Fri, 25 Jan 2013 15:56:55 +0530	[thread overview]
Message-ID: <1359109615-2410-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1359109615-2410-1-git-send-email-kishon@ti.com>

Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI), mode
which is mostly OTG, power that specifies the amount of power this can supply
when in host mode.
The information about usb otg node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt |    2 ++
 arch/arm/boot/dts/omap3-beagle-xm.dts              |    6 ++++++
 arch/arm/boot/dts/omap3-evm.dts                    |    6 ++++++
 arch/arm/boot/dts/omap3-overo.dtsi                 |    6 ++++++
 arch/arm/boot/dts/omap3.dtsi                       |   12 ++++++++++++
 arch/arm/boot/dts/omap4-panda.dts                  |    6 ++++++
 arch/arm/boot/dts/omap4-sdp.dts                    |    6 ++++++
 arch/arm/boot/dts/omap4.dtsi                       |   13 +++++++++++++
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 9 files changed, 58 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index b36df59..b892f58 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "50". This signifies the controller can supply upto
    100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
 
 Optional properties:
  - ctrl-module : phandle of the control module this glue uses to write to
@@ -32,6 +33,7 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
 	num_eps = <16>;
 	ram_bits = <12>;
 	ctrl-module = <&omap_control_usb>;
+	usb-phy = <&usb2_phy>;
 };
 
 Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..cb07583 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
 	 */
 	ti,pulldowns = <0x03a1c4>;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..afb9ba9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..4b3d157 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..176561b 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,17 @@
 			ti,timer-alwon;
 			ti,timer-secure;
 		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb-phy = <&usb2_phy>;
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..612c9bb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -206,3 +206,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..582d7ee 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -428,3 +428,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index c829d7e..ab817a2 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -542,5 +542,18 @@
 			reg-names = "control_dev_conf", "otghs_control";
 			ti,type = <1>;
 		};
+
+		usb_otg_hs: usb_otg_hs@4a0ab000 {
+			compatible = "ti,omap4-musb";
+			reg = <0x4a0ab000 0x7ff>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb-phy = <&usb2_phy>;
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+			ti,has-mailbox;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ed0bc95..398d2c3 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -67,7 +67,7 @@
 		#interrupt-cells = <1>;
 	};
 
-	twl4030-usb {
+	usb2_phy: twl4030-usb {
 		compatible = "ti,twl4030-usb";
 		interrupts = <10>, <4>;
 		usb1v5-supply = <&vusb1v5>;
-- 
1.7.9.5


  parent reply	other threads:[~2013-01-25 10:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-25 10:26 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 2/3] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2013-01-25 10:26 ` Kishon Vijay Abraham I [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-09-19  9:32 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2012-09-19  9:32 ` [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359109615-2410-4-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=rnayak@ti.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).