From: laura.vasilescu@rosedu.org
To: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org, e1000-devel@lists.sourceforge.net,
greg@kroah.com, carolyn.wyborny@intel.com,
anjali.singhai@intel.com, jeffrey.t.kirsher@intel.com,
Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
Subject: [PATCH][trivial] drivers/net: Fix checkpatch errors in intel/e1000_82575.c
Date: Thu, 2 May 2013 16:06:38 +0300 [thread overview]
Message-ID: <1367499998-7494-1-git-send-email-laura.vasilescu@rosedu.org> (raw)
From: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 33 ++++++++++++--------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index ff6a17c..3afbab6 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -74,8 +74,8 @@ static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
-static const u16 e1000_82580_rxpbs_table[] =
- { 36, 72, 144, 1, 2, 4, 8, 16,
+static const u16 e1000_82580_rxpbs_table[] = {
+ 36, 72, 144, 1, 2, 4, 8, 16,
35, 70, 140 };
#define E1000_82580_RXPBS_TABLE_SIZE \
(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
@@ -404,7 +404,7 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
- struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
s32 ret_val;
u32 ctrl_ext = 0;
@@ -1002,8 +1002,8 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
- while (igb_get_hw_semaphore(hw) != 0);
- /* Empty */
+ while (igb_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
swfw_sync = rd32(E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
@@ -1066,7 +1066,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
if (hw->phy.media_type != e1000_media_type_copper) {
ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
- &duplex);
+ &duplex);
/* Use this flag to determine if link needs to be checked or
* not. If we have link clear the flag so that we do not
* continue to check for link.
@@ -1150,20 +1150,18 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
mac->serdes_has_link = true;
/* Detect and store PCS speed */
- if (pcs & E1000_PCS_LSTS_SPEED_1000) {
+ if (pcs & E1000_PCS_LSTS_SPEED_1000)
*speed = SPEED_1000;
- } else if (pcs & E1000_PCS_LSTS_SPEED_100) {
+ else if (pcs & E1000_PCS_LSTS_SPEED_100)
*speed = SPEED_100;
- } else {
+ else
*speed = SPEED_10;
- }
/* Detect and store PCS duplex */
- if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
+ if (pcs & E1000_PCS_LSTS_DUPLEX_FULL)
*duplex = FULL_DUPLEX;
- } else {
+ else
*duplex = HALF_DUPLEX;
- }
}
return 0;
@@ -1222,9 +1220,8 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw)
/* set the completion timeout for interface */
ret_val = igb_set_pcie_completion_timeout(hw);
- if (ret_val) {
+ if (ret_val)
hw_dbg("PCI-E Set completion timeout has failed.\n");
- }
hw_dbg("Masking off all interrupts\n");
wr32(E1000_IMC, 0xffffffff);
@@ -1468,7 +1465,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
* link either autoneg or be forced to 1000/Full
*/
ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
- E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+ E1000_CTRL_FD | E1000_CTRL_FRCDPX;
/* set speed of 1000/Full if speed/duplex is forced */
reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
@@ -1784,14 +1781,14 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
* 16ms to 55ms
*/
ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
- &pcie_devctl2);
+ &pcie_devctl2);
if (ret_val)
goto out;
pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
- &pcie_devctl2);
+ &pcie_devctl2);
out:
/* disable completion timeout resend */
gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
--
1.7.10.4
next reply other threads:[~2013-05-02 13:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-02 13:06 laura.vasilescu [this message]
2013-05-02 22:25 ` [PATCH][trivial] drivers/net: Fix checkpatch errors in intel/e1000_82575.c Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367499998-7494-1-git-send-email-laura.vasilescu@rosedu.org \
--to=laura.vasilescu@rosedu.org \
--cc=anjali.singhai@intel.com \
--cc=carolyn.wyborny@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=greg@kroah.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).