From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753538Ab3EPQPF (ORCPT ); Thu, 16 May 2013 12:15:05 -0400 Received: from relay2.sgi.com ([192.48.179.30]:58803 "EHLO relay.sgi.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750969Ab3EPQO6 (ORCPT ); Thu, 16 May 2013 12:14:58 -0400 From: Robin Holt To: Andrew Morton Cc: "Srivatsa S. Bhat" , Robin Holt , "H. Peter Anvin" , Russ Anderson , Russell King , Guan Xuetao , Linux Kernel Mailing List , the arch/x86 maintainers , Arm Mailing List , Subject: [PATCH -v11 resend 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug Date: Thu, 16 May 2013 11:14:40 -0500 Message-Id: <1368720890-57711-2-git-send-email-holt@sgi.com> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1368720890-57711-1-git-send-email-holt@sgi.com> References: <1368720890-57711-1-git-send-email-holt@sgi.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: "Srivatsa S. Bhat" There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Robin Holt To: Andrew Morton Cc: H. Peter Anvin Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Linux Kernel Mailing List Cc: the arch/x86 maintainers Cc: Arm Mailing List Cc: --- include/linux/cpu.h | 4 ++++ kernel/cpu.c | 55 ++++++++++++++++++++++------------------------------- 2 files changed, 27 insertions(+), 32 deletions(-) diff --git a/include/linux/cpu.h b/include/linux/cpu.h index c6f6e08..9f3c7e8 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys; extern void get_online_cpus(void); extern void put_online_cpus(void); +extern void cpu_hotplug_disable(void); +extern void cpu_hotplug_enable(void); #define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri) #define register_hotcpu_notifier(nb) register_cpu_notifier(nb) #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb) @@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void) #define get_online_cpus() do { } while (0) #define put_online_cpus() do { } while (0) +#define cpu_hotplug_disable() do { } while (0) +#define cpu_hotplug_enable() do { } while (0) #define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0) /* These aren't inline functions due to a GCC bug. */ #define register_hotcpu_notifier(nb) ({ (void)(nb); 0; }) diff --git a/kernel/cpu.c b/kernel/cpu.c index b5e4ab2..198a388 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -133,6 +133,27 @@ static void cpu_hotplug_done(void) mutex_unlock(&cpu_hotplug.lock); } +/* + * Wait for currently running CPU hotplug operations to complete (if any) and + * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects + * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the + * hotplug path before performing hotplug operations. So acquiring that lock + * guarantees mutual exclusion from any currently running hotplug operations. + */ +void cpu_hotplug_disable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 1; + cpu_maps_update_done(); +} + +void cpu_hotplug_enable(void) +{ + cpu_maps_update_begin(); + cpu_hotplug_disabled = 0; + cpu_maps_update_done(); +} + #else /* #if CONFIG_HOTPLUG_CPU */ static void cpu_hotplug_begin(void) {} static void cpu_hotplug_done(void) {} @@ -541,36 +562,6 @@ static int __init alloc_frozen_cpus(void) core_initcall(alloc_frozen_cpus); /* - * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU - * hotplug when tasks are about to be frozen. Also, don't allow the freezer - * to continue until any currently running CPU hotplug operation gets - * completed. - * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the - * 'cpu_add_remove_lock'. And this same lock is also taken by the regular - * CPU hotplug path and released only after it is complete. Thus, we - * (and hence the freezer) will block here until any currently running CPU - * hotplug operation gets completed. - */ -void cpu_hotplug_disable_before_freeze(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 1; - cpu_maps_update_done(); -} - - -/* - * When tasks have been thawed, re-enable regular CPU hotplug (which had been - * disabled while beginning to freeze tasks). - */ -void cpu_hotplug_enable_after_thaw(void) -{ - cpu_maps_update_begin(); - cpu_hotplug_disabled = 0; - cpu_maps_update_done(); -} - -/* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen * or not, as reported by the notification, remains unchanged *throughout the @@ -589,12 +580,12 @@ cpu_hotplug_pm_callback(struct notifier_block *nb, case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: - cpu_hotplug_disable_before_freeze(); + cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: - cpu_hotplug_enable_after_thaw(); + cpu_hotplug_enable(); break; default: -- 1.8.2.1