From: Stephen Boyd <sboyd@codeaurora.org>
To: David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@fifo99.com>,
Bryan Huntsman <bryanh@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH/RESEND 03/12] usb: otg: msm: Convert to clk_prepare/unprepare
Date: Mon, 17 Jun 2013 10:43:10 -0700 [thread overview]
Message-ID: <1371490999-15501-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1371490999-15501-1-git-send-email-sboyd@codeaurora.org>
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/usb/phy/phy-msm-usb.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf4..d08f334 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -514,13 +514,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
motg->pdata->otg_control == OTG_PMIC_CONTROL)
writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src))
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -552,12 +552,12 @@ static int msm_otg_resume(struct msm_otg *motg)
return 0;
if (!IS_ERR(motg->pclk_src))
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
- clk_enable(motg->pclk);
- clk_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -1468,7 +1468,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
if (IS_ERR(motg->pclk_src))
goto put_clk;
clk_set_rate(motg->pclk_src, INT_MAX);
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
} else
motg->pclk_src = ERR_PTR(-ENOENT);
@@ -1511,8 +1511,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
goto free_regs;
}
- clk_enable(motg->clk);
- clk_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
@@ -1532,7 +1532,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
}
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
@@ -1579,8 +1579,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
free_irq:
free_irq(motg->irq, motg);
disable_clks:
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
ldo_exit:
msm_hsusb_ldo_init(motg, 0);
vddcx_exit:
@@ -1593,7 +1593,7 @@ put_core_clk:
clk_put(motg->pclk);
put_pclk_src:
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
put_clk:
@@ -1643,12 +1643,12 @@ static int msm_otg_remove(struct platform_device *pdev)
if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
dev_err(phy->dev, "Unable to suspend PHY\n");
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
msm_hsusb_ldo_init(motg, 0);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-06-17 17:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-17 17:43 [PATCH/RESEND 00/12] Convert MSM to common clock framework Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 01/12] msm_serial: Convert to clk_prepare/unprepare Stephen Boyd
2013-06-17 17:55 ` Greg Kroah-Hartman
2013-06-17 18:07 ` David Brown
2013-06-17 18:27 ` Greg Kroah-Hartman
2013-06-17 17:43 ` [PATCH/RESEND 02/12] msm_serial: Use devm_clk_get() and properly return errors Stephen Boyd
2013-06-17 17:55 ` Greg Kroah-Hartman
2013-06-17 17:43 ` Stephen Boyd [this message]
2013-06-17 17:43 ` [PATCH/RESEND 04/12] msm_sdcc: Convert to clk_prepare/unprepare Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 05/12] msm: iommu: " Stephen Boyd
2013-06-20 16:40 ` Stephen Boyd
2013-06-20 17:04 ` Joerg Roedel
2013-06-17 17:43 ` [PATCH/RESEND 06/12] msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() Stephen Boyd
2013-06-20 16:41 ` Stephen Boyd
2013-06-20 17:04 ` Joerg Roedel
2013-06-17 17:43 ` [PATCH/RESEND 07/12] ARM: msm: Remove custom clk_set_flags() API Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 08/12] ARM: msm: Remove custom clk_set_{max,min}_rate() API Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 09/12] ARM: msm: Remove clock-7x30.h include file Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 10/12] ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 11/12] ARM: msm: Make proc_comm clock control into a platform driver Stephen Boyd
2013-06-19 16:34 ` Stephen Boyd
2013-06-17 17:43 ` [PATCH/RESEND 12/12] ARM: msm: Migrate to common clock framework Stephen Boyd
2013-06-21 1:29 ` [PATCH/RESEND 00/12] Convert MSM " Stephen Boyd
2013-06-24 20:10 ` David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371490999-15501-4-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).