[PATCH 1/2] regulator: of: Added a property to indicate bypass mode support

[Kishon Vijay Abraham I <kishon@ti.com>]

Added a property to indicate if the regulator supports bypass mode.
Also modified of_get_regulation_constraints() to check for that
property and set appropriate constraints.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/regulator/regulator.txt |    1 +
 drivers/regulator/of_regulator.c                          |    3 +++
 2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index ecfc6cc..48a3b8e 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -9,6 +9,7 @@ Optional properties:
 - regulator-max-microamp: largest current consumers may set
 - regulator-always-on: boolean, regulator should never be disabled
 - regulator-boot-on: bootloader/firmware enabled regulator
+- regulator-allow-bypass: allow the regulator to go into bypass mode
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
 
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 66ca769..f3c8f8f 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -61,6 +61,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 	else /* status change should be possible if not always on. */
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
 
+	if (of_property_read_bool(np, "regulator-allow-bypass"))
+		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
+
 	ramp_delay = of_get_property(np, "regulator-ramp-delay", NULL);
 	if (ramp_delay)
 		constraints->ramp_delay = be32_to_cpu(*ramp_delay);
-- 
1.7.10.4