linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi@ti.com>
To: <sameo@linux.intel.com>
Cc: <lee.jones@linaro.org>, Tony Lindgren <tony@atomide.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux ARM Kernel Mailing List 
	<linux-arm-kernel@lists.infradead.org>,
	Felipe Balbi <balbi@ti.com>
Subject: [PATCH 03/13] mfd: menelaus: convert to threaded irq
Date: Wed, 27 Nov 2013 13:06:47 -0600	[thread overview]
Message-ID: <1385579217-20127-4-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1385579217-20127-1-git-send-email-balbi@ti.com>

we don't need that extra workqueue when we
have generic threaded irq handlers support.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/mfd/menelaus.c | 29 ++++-------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 8bd97ca..11d7d81 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -36,7 +36,6 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
-#include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
@@ -161,12 +160,9 @@
 #define MCT_PIN_ST_S1_CD_ST		(1 << 0)
 #define MCT_PIN_ST_S2_CD_ST		(1 << 1)
 
-static void menelaus_work(struct work_struct *_menelaus);
-
 struct menelaus_chip {
 	struct mutex		lock;
 	struct i2c_client	*client;
-	struct work_struct	work;
 #ifdef CONFIG_RTC_DRV_TWL92330
 	struct rtc_device	*rtc;
 	u8			rtc_control;
@@ -795,11 +791,9 @@ out:
 
 /*-----------------------------------------------------------------------*/
 
-/* Handles Menelaus interrupts. Does not run in interrupt context */
-static void menelaus_work(struct work_struct *_menelaus)
+static irqreturn_t menelaus_irq(int irq, void *_menelaus)
 {
-	struct menelaus_chip *menelaus =
-			container_of(_menelaus, struct menelaus_chip, work);
+	struct menelaus_chip *menelaus = _menelaus;
 	void (*handler)(struct menelaus_chip *menelaus);
 
 	while (1) {
@@ -826,18 +820,6 @@ static void menelaus_work(struct work_struct *_menelaus)
 			mutex_unlock(&menelaus->lock);
 		}
 	}
-	enable_irq(menelaus->client->irq);
-}
-
-/*
- * We cannot use I2C in interrupt context, so we just schedule work.
- */
-static irqreturn_t menelaus_irq(int irq, void *_menelaus)
-{
-	struct menelaus_chip *menelaus = _menelaus;
-
-	disable_irq_nosync(irq);
-	(void)schedule_work(&menelaus->work);
 
 	return IRQ_HANDLED;
 }
@@ -1225,8 +1207,8 @@ static int menelaus_probe(struct i2c_client *client,
 	menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
 
 	if (client->irq > 0) {
-		err = request_irq(client->irq, menelaus_irq, 0,
-				  DRIVER_NAME, menelaus);
+		err = request_threaded_irq(client->irq, NULL, menelaus_irq,
+				IRQF_ONESHOT, DRIVER_NAME, menelaus);
 		if (err) {
 			dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
 					client->irq, err);
@@ -1235,7 +1217,6 @@ static int menelaus_probe(struct i2c_client *client,
 	}
 
 	mutex_init(&menelaus->lock);
-	INIT_WORK(&menelaus->work, menelaus_work);
 
 	pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
 
@@ -1258,7 +1239,6 @@ static int menelaus_probe(struct i2c_client *client,
 	return 0;
 fail:
 	free_irq(client->irq, menelaus);
-	flush_work(&menelaus->work);
 	return err;
 }
 
@@ -1267,7 +1247,6 @@ static int menelaus_remove(struct i2c_client *client)
 	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
 
 	free_irq(client->irq, menelaus);
-	flush_work(&menelaus->work);
 	the_menelaus = NULL;
 	return 0;
 }
-- 
1.8.4.GIT


  parent reply	other threads:[~2013-11-27 19:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-27 19:06 [PATCH 00/13] mfd: menelaus: a few cleanups Felipe Balbi
2013-11-27 19:06 ` [PATCH 01/13] mfd: menelaus: drop __exit section annotation Felipe Balbi
2013-11-27 19:06 ` [PATCH 02/13] mfd: menelaus: switch over to module_i2c_driver Felipe Balbi
2013-11-27 19:06 ` Felipe Balbi [this message]
2013-11-27 19:06 ` [PATCH 04/13] mfd: menelaus: remove unnecessary loop Felipe Balbi
2013-11-27 19:06 ` [PATCH 05/13] mfd: menelaus: use for_each_set_bit() Felipe Balbi
2013-11-27 19:06 ` [PATCH 06/13] mfd: menelaus: pass menelaus pointer as argument to enable/disable irq Felipe Balbi
2013-11-27 19:06 ` [PATCH 07/13] mfd: menelaus: limit the usage of the_menelaus Felipe Balbi
2013-11-27 19:06 ` [PATCH 08/13] mfd: menelaus: pass menelaus_chip pointer to add/remove irq functions Felipe Balbi
2013-11-27 19:06 ` [PATCH 09/13] mfd: menelaus: pass menelaus_chip pointer to get/set voltage Felipe Balbi
2013-11-27 19:06 ` [PATCH 10/13] mfd: menelaus: pass menelaus_chip argument to menelaus <-> time helpers Felipe Balbi
2013-11-27 19:06 ` [PATCH 11/13] mfd: menelaus: start to use irqdomain Felipe Balbi
2013-11-27 19:06 ` [PATCH 12/13] mfd: menelaus: switch all children to threaded_irq Felipe Balbi
2013-11-27 19:06 ` [PATCH 13/13] mfd: menelaus: remove unnecessary definition Felipe Balbi
2013-11-27 20:02 ` [PATCH 00/13] mfd: menelaus: a few cleanups Aaro Koskinen
2013-11-27 20:11   ` Felipe Balbi
2013-11-27 20:46     ` Aaro Koskinen
2013-11-28  3:00       ` Felipe Balbi
2013-11-28  9:32         ` Lee Jones
2013-11-28 21:34         ` Aaro Koskinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385579217-20127-4-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).