linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	pmladek@suse.cz, Frederic Weisbecker <fweisbec@gmail.com>,
	Steven Rostedt <rostedt@goodmis.org>, Jan Kara <jack@suse.cz>
Subject: [PATCH 3/8] printk: Enable interrupts before calling console_trylock_for_printk()
Date: Tue, 25 Mar 2014 18:54:56 +0100	[thread overview]
Message-ID: <1395770101-24534-4-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1395770101-24534-1-git-send-email-jack@suse.cz>

We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()).  However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().

We can loose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock()
especially since later in the patch series we will want to spin on
console_sem in console_trylock_for_printk().

Signed-off-by: Jan Kara <jack@suse.cz>
---
 kernel/printk/printk.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 7a8ffd89875c..56649edfae9c 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1314,10 +1314,9 @@ static int have_callable_console(void)
 /*
  * Can we actually use the console at this time on this cpu?
  *
- * Console drivers may assume that per-cpu resources have
- * been allocated. So unless they're explicitly marked as
- * being able to cope (CON_ANYTIME) don't call them until
- * this CPU is officially up.
+ * Console drivers may assume that per-cpu resources have been allocated. So
+ * unless they're explicitly marked as being able to cope (CON_ANYTIME) don't
+ * call them until this CPU is officially up.
  */
 static inline int can_use_console(unsigned int cpu)
 {
@@ -1330,8 +1329,10 @@ static inline int can_use_console(unsigned int cpu)
  * console_lock held, and 'console_locked' set) if it
  * is successful, false otherwise.
  */
-static int console_trylock_for_printk(unsigned int cpu)
+static int console_trylock_for_printk(void)
 {
+	unsigned int cpu = smp_processor_id();
+
 	if (!console_trylock())
 		return 0;
 	/*
@@ -1501,7 +1502,8 @@ asmlinkage int vprintk_emit(int facility, int level,
 		 */
 		if (!oops_in_progress && !lockdep_recursing(current)) {
 			recursion_bug = 1;
-			goto out_restore_irqs;
+			local_irq_restore(flags);
+			return 0;
 		}
 		zap_locks();
 	}
@@ -1597,17 +1599,22 @@ asmlinkage int vprintk_emit(int facility, int level,
 
 	logbuf_cpu = UINT_MAX;
 	raw_spin_unlock(&logbuf_lock);
+	lockdep_on();
+	local_irq_restore(flags);
+
+	/*
+	 * Disable preemption to avoid being preempted while holding
+	 * console_sem which would prevent anyone from printing to console
+	 */
+	preempt_disable();
 	/*
 	 * Try to acquire and then immediately release the console semaphore.
 	 * The release will print out buffers and wake up /dev/kmsg and syslog()
 	 * users.
 	 */
-	if (console_trylock_for_printk(this_cpu))
+	if (console_trylock_for_printk())
 		console_unlock();
-
-	lockdep_on();
-out_restore_irqs:
-	local_irq_restore(flags);
+	preempt_enable();
 
 	return printed_len;
 }
-- 
1.8.1.4


  parent reply	other threads:[~2014-03-25 17:55 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-25 17:54 [PATCH 0/8 v4] printk: Cleanups and softlockup avoidance Jan Kara
2014-03-25 17:54 ` [PATCH 1/8] printk: Remove outdated comment Jan Kara
2014-03-25 17:54 ` [PATCH 2/8] printk: Release lockbuf_lock before calling console_trylock_for_printk() Jan Kara
2014-04-23 20:56   ` Andrew Morton
2014-04-24 10:18     ` Jan Kara
2014-03-25 17:54 ` Jan Kara [this message]
2014-03-25 17:54 ` [PATCH 4/8] printk: Remove separate printk_sched buffers and use printk buf instead Jan Kara
2014-05-05 18:37   ` Steven Rostedt
2014-03-25 17:54 ` [PATCH 5/8] printk: Hand over printing to console if printing too long Jan Kara
2014-03-25 17:54 ` [PATCH 6/8] printk: Start printing handover kthreads on demand Jan Kara
2014-03-26 17:16   ` One Thousand Gnomes
2014-03-26 19:06     ` Jan Kara
2014-03-25 17:55 ` [PATCH 7/8] kernel: Avoid softlockups in stop_machine() during heavy printing Jan Kara
2014-03-25 17:55 ` [PATCH 8/8] printk: Add config option for disabling printk offloading Jan Kara
2014-03-26 17:23   ` One Thousand Gnomes
2014-03-26 19:28     ` Jan Kara
2014-04-18 18:54       ` Andrew Morton
2014-04-22 10:22         ` One Thousand Gnomes
2014-04-23 11:08           ` Jan Kara
2014-04-23 12:35             ` One Thousand Gnomes
2014-04-23 14:29               ` Jan Kara
2014-04-23 18:17             ` Andrew Morton
2014-04-23 21:16               ` One Thousand Gnomes
2014-04-23 21:41                 ` Jiri Kosina
2014-04-24 14:00                   ` One Thousand Gnomes
2014-05-15 21:28               ` Jan Kara
2014-04-23  9:30         ` Jan Kara
2014-04-08 14:27 ` [PATCH 0/8 v4] printk: Cleanups and softlockup avoidance Jan Kara
2014-04-08 19:02   ` Andrew Morton
  -- strict thread matches above, loose matches on Subject: below --
2014-03-14 16:21 [PATCH 0/8 v3] " Jan Kara
2014-03-14 16:21 ` [PATCH 3/8] printk: Enable interrupts before calling console_trylock_for_printk() Jan Kara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395770101-24534-4-git-send-email-jack@suse.cz \
    --to=jack@suse.cz \
    --cc=akpm@linux-foundation.org \
    --cc=fweisbec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmladek@suse.cz \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).