From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH v5 0/9] mfd: max14577: Add support for MAX77836
Date: Wed, 16 Apr 2014 12:44:38 +0200 [thread overview]
Message-ID: <1397645078.6147.11.camel@AMDC1943> (raw)
In-Reply-To: <20140416102846.GL4754@lee--X1>
On śro, 2014-04-16 at 11:28 +0100, Lee Jones wrote:
> > This is first part of fifth version of patchset adding support for
> > MAX77836 device to the max14577 driver.
> >
> > I decided to split the patchset into smaller parts. I hope this would
> > help in getting necessary review/acks from maintainers.
> >
> > The first part introduces changes in max14577 driver and adds support
> > for MAX77836 in MFD, extcon and regulator drivers. Most of these
> > patches already have required acks from maintainers.
> > Full v4 patchset can be found here:
> > http://thread.gmane.org/gmane.linux.kernel/1654267
>
> So what's the plan for this driver now? What's missing? Do you have
> all the Acks you need? If so, I'm happy to apply this patch-set and
> supply a pull-request to the other maintainers.
Next patches (part 2):
1. charger: max14577: Add support for MAX77836 charger
2. power: max17040: Add ID for MAX77836 Fuel Gauge block
3. regulator/mfd: max14577: Export symbols for calculating charger
current
4. charger: max14577: Configure battery-dependent settings from DTS
5. Documentation: mfd: max14577: Add device tree bindings document
6. regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s
They are quite independent from each other so I think it would be the
best if you could prepare an immutable branch with first part of
patches.
Best regards,
Krzysztof
>
> > Changes since v4
> > ================
> > 1. Updated Kconfig entries mentioning MAX77836.
> > 2. Removed rename-like patches:
> > [PATCH v4 02/16] mfd: max14577: Rename and add MAX14577 symbols
> > [PATCH v4 03/16] mfd: max14577: Rename state container to maxim_core
> > 3. Added new patches (not yet reviewed):
> > [PATCH v5 2/9] mfd: max14577: Add muic prefix to regmap config
> > [PATCH v5 6/9] mfd: max14577: Add MAX14577 prefix to IRQ defines
> > 4. Rebased on 3.15-rc1.
> >
> > Changes since v3
> > ================
> > 1. Applied minor fixes (pointed by Lee Jones).
> > 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa).
> > 3. Patch 14/charger: Minor change in parsing EOC value from DTS.
> > 4. Rebased on next-20140224.
> >
> > Changes since v2
> > ================
> > 1. Added ACK-s.
> > 2. Applied minor checkpatch fixes (pointed by Lee Jones).
> > 3. Rebased on next-20140217.
> >
> > Changes since v1
> > ================
> > 1. Added ACK-s, reviews and tested-by tags.
> > 2. Removed applied patches (they were merged to the linux-next tree).
> > 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type)
> > and 8/15 (add max77836 support to max14577).
> > 4. Rebased on next tree.
> > 5. Added patch 13 and 14 (pointed by Jenny Tc):
> > - regulator/mfd: max14577: Export symbols for calculating charger current
> > - charger: max14577: Configure battery-dependent settings from DTS
> > 6. Updated bindings documentation with new charger bindings.
> > Previous thread:
> > - [PATCH 00/18] mfd: max14577: Add support for MAX77836
> > http://thread.gmane.org/gmane.linux.kernel/1636654/focus=1636674
> >
> >
> > Description
> > ===========
> > The MAX77836 is almost the same as MAX14577. Basically it is an extended
> > version of MAX14577. The chipsets have same MUIC component so the extcon,
> > charger and regulators require only little adjustments. More changes were
> > needed in the charger (because it uses lower charging current) and regulator
> > drivers (because mentioned different charing current and additional
> > regulators). The MAX77836 has also PMIC and Fuel Gauge (which is the same
> > as MAX17040/17048 Fuel Gauge).
> >
> > The MAX77836 uses three I2C slave addresses and has additional interrupts
> > (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> > just like MAX77686 and MAX77693.
> >
> >
> > Best regards,
> > Krzysztof Kozlowski
> >
> >
> > Chanwoo Choi (1):
> > extcon: max14577: Change extcon name instead of static name according
> > to device type
> >
> > Krzysztof Kozlowski (8):
> > mfd: max14577: Add muic prefix to regmap config
> > mfd: max14577: Add detection of device type
> > extcon: max14577: Add max14577 prefix to muic_irqs
> > extcon: max14577: Choose muic_irqs according to device type
> > mfd: max14577: Add MAX14577 prefix to IRQ defines
> > mfd: max77836: Add MAX77836 support to max14577 driver
> > extcon: max14577: Add support for MAX77836
> > regulator: max14577: Add support for MAX77836 regulators
> >
> > drivers/extcon/Kconfig | 4 +-
> > drivers/extcon/extcon-max14577.c | 174 +++++++++++++------
> > drivers/mfd/Kconfig | 6 +-
> > drivers/mfd/max14577.c | 315 ++++++++++++++++++++++++++++++-----
> > drivers/regulator/Kconfig | 7 +-
> > drivers/regulator/max14577.c | 277 ++++++++++++++++++++++++++----
> > include/linux/mfd/max14577-private.h | 222 ++++++++++++++++++------
> > include/linux/mfd/max14577.h | 19 ++-
> > 8 files changed, 836 insertions(+), 188 deletions(-)
> >
>
next prev parent reply other threads:[~2014-04-16 10:44 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 9:17 [PATCH v5 0/9] mfd: max14577: Add support for MAX77836 Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 1/9] extcon: max14577: Change extcon name instead of static name according to device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 2/9] mfd: max14577: Add muic prefix to regmap config Krzysztof Kozlowski
2014-04-15 6:36 ` Chanwoo Choi
2014-04-16 10:22 ` Lee Jones
2014-04-14 9:17 ` [PATCH v5 3/9] mfd: max14577: Add detection of device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 4/9] extcon: max14577: Add max14577 prefix to muic_irqs Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 5/9] extcon: max14577: Choose muic_irqs according to device type Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 6/9] mfd: max14577: Add MAX14577 prefix to IRQ defines Krzysztof Kozlowski
2014-04-15 6:37 ` Chanwoo Choi
2014-04-16 10:27 ` Lee Jones
2014-04-14 9:17 ` [PATCH v5 7/9] mfd: max77836: Add MAX77836 support to max14577 driver Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 8/9] extcon: max14577: Add support for MAX77836 Krzysztof Kozlowski
2014-04-14 9:17 ` [PATCH v5 9/9] regulator: max14577: Add support for MAX77836 regulators Krzysztof Kozlowski
2014-04-15 6:50 ` [PATCH v5 0/9] mfd: max14577: Add support for MAX77836 Chanwoo Choi
2014-04-16 10:28 ` Lee Jones
2014-04-16 10:44 ` Krzysztof Kozlowski [this message]
2014-04-16 10:51 ` Chanwoo Choi
2014-04-16 11:02 ` Krzysztof Kozlowski
2014-04-16 11:36 ` Chanwoo Choi
2014-04-16 12:17 ` Lee Jones
2014-04-16 14:21 ` Chanwoo Choi
2014-04-16 11:08 ` Lee Jones
2014-04-16 11:13 ` Krzysztof Kozlowski
2014-04-16 12:18 ` Lee Jones
2014-04-23 11:52 ` Krzysztof Kozlowski
2014-04-23 13:04 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397645078.6147.11.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).