From: Courtney Cavin <courtney.cavin@sonymobile.com>
To: Samuel Ortiz <sameo@linux.intel.com>, Lee Jones <lee.jones@linaro.org>
Cc: Josh Cartwright <joshc@codeaurora.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>
Subject: [PATCH 1/2] mfd: pm8x41: add support for Qualcomm 8x41 PMICs
Date: Tue, 22 Apr 2014 17:31:49 -0700 [thread overview]
Message-ID: <1398213110-28135-1-git-send-email-courtney.cavin@sonymobile.com> (raw)
From: Josh Cartwright <joshc@codeaurora.org>
The Qualcomm 8941 and 8841 PMICs are components used with the Snapdragon
800 series SoC family. This driver exists largely as a glue mfd component,
it exists to be an owner of an SPMI regmap for children devices
described in device tree.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
---
drivers/mfd/Kconfig | 13 +++++++++++
drivers/mfd/Makefile | 1 +
drivers/mfd/pm8x41.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 77 insertions(+)
create mode 100644 drivers/mfd/pm8x41.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3383412..f5ff799 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -502,6 +502,19 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_PM8X41
+ bool "Qualcomm PM8x41 PMIC"
+ depends on ARCH_QCOM
+ select REGMAP_SPMI
+ help
+ This enables basic support for the Qualcomm 8941 and 8841 PMICs.
+ These PMICs are currently used with the Snapdragon 800 series of
+ SoCs. Note, that this will only be useful paired with descriptions
+ of the independent functions as children nodes in the device tree.
+
+ Say M here if you want to include support for the PM8x41 series as a
+ module. The module will be called "pm8x41".
+
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2851275..f0df41d 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -151,6 +151,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_PM8X41) += pm8x41.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/pm8x41.c b/drivers/mfd/pm8x41.c
new file mode 100644
index 0000000..c85e0d6
--- /dev/null
+++ b/drivers/mfd/pm8x41.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spmi.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
+
+static const struct regmap_config pm8x41_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0xFFFF,
+};
+
+static int pm8x41_remove_child(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static void pm8x41_remove(struct spmi_device *sdev)
+{
+ device_for_each_child(&sdev->dev, NULL, pm8x41_remove_child);
+}
+
+static int pm8x41_probe(struct spmi_device *sdev)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spmi_ext(sdev, &pm8x41_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_dbg(&sdev->dev, "regmap creation failed.\n");
+ return PTR_ERR(regmap);
+ }
+
+ return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);
+}
+
+static const struct of_device_id pm8x41_id_table[] = {
+ { .compatible = "qcom,pm8841", },
+ { .compatible = "qcom,pm8941", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pm8x41_id_table);
+
+static struct spmi_driver pm8x41_driver = {
+ .probe = pm8x41_probe,
+ .remove = pm8x41_remove,
+ .driver = {
+ .name = "pm8x41",
+ .of_match_table = pm8x41_id_table,
+ },
+};
+module_spmi_driver(pm8x41_driver);
--
1.8.1.5
next reply other threads:[~2014-04-23 0:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 0:31 Courtney Cavin [this message]
2014-04-23 0:31 ` [PATCH 2/2] mfd: pm8x41: document device tree bindings Courtney Cavin
2014-04-23 10:50 ` [PATCH 1/2] mfd: pm8x41: add support for Qualcomm 8x41 PMICs Lee Jones
2014-04-23 17:38 ` Courtney Cavin
2014-04-23 13:19 ` Ivan T. Ivanov
2014-04-23 18:16 ` Courtney Cavin
2014-04-23 20:34 ` Ivan T. Ivanov
2014-04-23 22:12 ` Courtney Cavin
2014-04-24 2:45 ` Rob Herring
2014-04-26 0:28 ` Frank Rowand
2014-04-26 0:40 ` Courtney Cavin
2014-04-26 0:53 ` Frank Rowand
2014-04-28 7:11 ` Ivan T. Ivanov
2014-05-07 18:35 ` Rob Herring
2014-04-23 21:46 ` Josh Cartwright
2014-04-23 23:36 ` Courtney Cavin
2014-04-24 18:18 ` Josh Cartwright
2014-05-09 12:45 ` Ivan T. Ivanov
2014-05-09 20:30 ` Courtney Cavin
2014-05-10 8:06 ` Ivan T. Ivanov
2014-04-26 1:38 ` David Collins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398213110-28135-1-git-send-email-courtney.cavin@sonymobile.com \
--to=courtney.cavin@sonymobile.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=joshc@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).