From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755867AbaEHVRH (ORCPT ); Thu, 8 May 2014 17:17:07 -0400 Received: from mail-wi0-f171.google.com ([209.85.212.171]:50012 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755735AbaEHVRC (ORCPT ); Thu, 8 May 2014 17:17:02 -0400 From: Linus Walleij To: Samuel Ortiz , Lee Jones , linux-kernel@vger.kernel.org Cc: Linus Walleij Subject: [RESEND PATCH 3/6] mfd: stmpe: probe properly from the device tree Date: Thu, 8 May 2014 23:16:36 +0200 Message-Id: <1399583799-23517-3-git-send-email-linus.walleij@linaro.org> X-Mailer: git-send-email 1.9.0 In-Reply-To: <1399583799-23517-1-git-send-email-linus.walleij@linaro.org> References: <1399583799-23517-1-git-send-email-linus.walleij@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The current STMPE I2C probing code does not really match the compatible strings - it matches node names happening to give the right device name. Instead, let's introduce some real compatible matching, more complex, more accurate. Make the driver depend on OF since all platforms using it are DT-only. Signed-off-by: Linus Walleij --- ChangeLog v2->v3: - Fix a stupid error where I left a dangling return statement in the probe path. - Fix up subject prope->probe ChangeLog v1->v2: - Make driver depend on OF and remove some ifdeffery that way. - Squash OF match table to single lines. - Merge of-specific probe function into probe(). - Print a small nag if DT is using the node name trick to make the driver probe. --- drivers/mfd/Kconfig | 1 + drivers/mfd/stmpe-i2c.c | 30 +++++++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 33834120d057..29be025d5835 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -675,6 +675,7 @@ config MFD_DB8500_PRCMU config MFD_STMPE bool "STMicroelectronics STMPE" depends on (I2C=y || SPI_MASTER=y) + depends on OF select MFD_CORE help Support for the STMPE family of I/O Expanders from diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index 0da02e11d58e..a45f9c0a330a 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "stmpe.h" static int i2c_reg_read(struct stmpe *stmpe, u8 reg) @@ -52,15 +53,41 @@ static struct stmpe_client_info i2c_ci = { .write_block = i2c_block_write, }; +static const struct of_device_id stmpe_of_match[] = { + { .compatible = "st,stmpe610", .data = (void *)STMPE610, }, + { .compatible = "st,stmpe801", .data = (void *)STMPE801, }, + { .compatible = "st,stmpe811", .data = (void *)STMPE811, }, + { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, }, + { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, }, + { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, }, + { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, }, + {}, +}; +MODULE_DEVICE_TABLE(of, stmpe_of_match); + static int stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + int partnum; + const struct of_device_id *of_id; + i2c_ci.data = (void *)id; i2c_ci.irq = i2c->irq; i2c_ci.client = i2c; i2c_ci.dev = &i2c->dev; - return stmpe_probe(&i2c_ci, id->driver_data); + of_id = of_match_device(stmpe_of_match, &i2c->dev); + if (!of_id) { + /* + * This happens when the I2C ID matches the node name + * but no real compatible string has been given. + */ + dev_info(&i2c->dev, "matching on node name, compatible is preferred\n"); + partnum = id->driver_data; + } else + partnum = (int)of_id->data; + + return stmpe_probe(&i2c_ci, partnum); } static int stmpe_i2c_remove(struct i2c_client *i2c) @@ -89,6 +116,7 @@ static struct i2c_driver stmpe_i2c_driver = { #ifdef CONFIG_PM .pm = &stmpe_dev_pm_ops, #endif + .of_match_table = stmpe_of_match, }, .probe = stmpe_i2c_probe, .remove = stmpe_i2c_remove, -- 1.9.0