From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Antoine Tenart <antoine.tenart@free-electrons.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 8/8] ARM: dts: berlin: convert BG2 to DT clock nodes
Date: Sun, 11 May 2014 22:24:41 +0200 [thread overview]
Message-ID: <1399839881-29895-9-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1399839881-29895-1-git-send-email-sebastian.hesselbarth@gmail.com>
This converts Berlin BG2 SoC dtsi to make use of the new DT clock
nodes for Berlin SoCs. While at it, also fix up twdclk which is
running at cpuclk/3 instead of sysclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/berlin2.dtsi | 200 +++++++++++++++++++++++++++++++++++------
1 file changed, 171 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 56a1af2f1052..5d84171a1e4b 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -12,6 +12,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -37,24 +38,18 @@
};
};
- clocks {
- smclk: sysmgr-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- cfgclk: cfg-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
- sysclk: system-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <400000000>;
- };
+ twdclk: twdclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&coreclk CLKID_CPU>;
+ clock-mult = <1>;
+ clock-div = <3>;
};
soc {
@@ -83,7 +78,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>;
+ clocks = <&twdclk>;
};
apb@e80000 {
@@ -98,7 +93,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -107,7 +102,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -116,7 +111,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -125,7 +120,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -134,7 +129,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -143,7 +138,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -152,7 +147,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -161,7 +156,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&cfgclk>;
+ clocks = <&coreclk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -176,6 +171,153 @@
};
};
+ syspll: pll@ea0014 {
+ compatible = "marvell,berlin2-pll";
+ #clock-cells = <0>;
+ reg = <0xea0014 0x14>;
+ clocks = <&refclk>;
+ };
+
+ mempll: pll@ea0028 {
+ compatible = "marvell,berlin2-pll";
+ #clock-cells = <0>;
+ reg = <0xea0028 0x14>;
+ clocks = <&refclk>;
+ };
+
+ cpupll: pll@ea003c {
+ compatible = "marvell,berlin2-pll";
+ #clock-cells = <0>;
+ reg = <0xea003c 0x14>;
+ clocks = <&refclk>;
+ };
+
+ avpll: pll@ea0040 {
+ compatible = "marvell,berlin2-avpll";
+ #clock-cells = <2>;
+ reg = <0xea0050 0x100>;
+ clocks = <&refclk>;
+ };
+
+ coreclk: clock@ea0150 {
+ compatible = "marvell,berlin2-core-clocks";
+ #clock-cells = <1>;
+ reg = <0xea0150 0x1c>;
+ clocks = <&refclk>, <&syspll>, <&mempll>, <&cpupll>,
+ <&avpll 0 1>, <&avpll 0 2>,
+ <&avpll 0 3>, <&avpll 0 4>,
+ <&avpll 0 5>, <&avpll 0 6>,
+ <&avpll 0 7>, <&avpll 0 8>,
+ <&avpll 1 1>, <&avpll 1 2>,
+ <&avpll 1 3>, <&avpll 1 4>,
+ <&avpll 1 5>, <&avpll 1 6>,
+ <&avpll 1 7>, <&avpll 1 8>;
+ clock-names = "refclk", "syspll", "mempll", "cpupll",
+ "avpll_a1", "avpll_a2", "avpll_a3", "avpll_a4",
+ "avpll_a5", "avpll_a6", "avpll_a7", "avpll_a8",
+ "avpll_b1", "avpll_b2", "avpll_b3", "avpll_b4",
+ "avpll_b5", "avpll_b6", "avpll_b7", "avpll_b8";
+ };
+
+ gfx3dcore_clk: clock@ea022c {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea0022c 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ gfx3dsys_clk: clock@ea0230 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00230 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ arc_clk: clock@ea0234 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00234 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ vip_clk: clock@ea0238 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00238 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ sdio0xin_clk: clock@ea023c {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea0023c 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ sdio1xin_clk: clock@ea0240 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00240 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ gfx3dextra_clk: clock@ea0244 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00244 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ gc360_clk: clock@ea024c {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea0024c 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
+ sdio_dllmst_clk: clock@ea0250 {
+ compatible = "marvell,berlin2-clk-div";
+ #clock-cells = <0>;
+ reg = <0xea00250 0x4>;
+ clocks = <&syspll>,
+ <&avpll 1 4>, <&avpll 1 5>,
+ <&avpll 1 6>, <&avpll 1 7>;
+ clock-names = "mux_bypass",
+ "mux0", "mux1", "mux2", "mux3";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -190,7 +332,7 @@
reg-shift = <2>;
reg-io-width = <1>;
interrupts = <8>;
- clocks = <&smclk>;
+ clocks = <&refclk>;
status = "disabled";
};
@@ -200,7 +342,7 @@
reg-shift = <2>;
reg-io-width = <1>;
interrupts = <9>;
- clocks = <&smclk>;
+ clocks = <&refclk>;
status = "disabled";
};
@@ -210,7 +352,7 @@
reg-shift = <2>;
reg-io-width = <1>;
interrupts = <10>;
- clocks = <&smclk>;
+ clocks = <&refclk>;
status = "disabled";
};
--
1.9.1
next prev parent reply other threads:[~2014-05-11 20:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-11 20:24 [PATCH 0/8] Marvell Berlin full clock support Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 1/8] clk: add helper for unique DT clock names Sebastian Hesselbarth
2014-05-13 19:49 ` Mike Turquette
2014-05-13 20:19 ` Sebastian Hesselbarth
[not found] ` <20140513205111.5943.12709@quantum>
2014-05-13 21:25 ` Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 2/8] clk: berlin: add clock binding docs for Marvell Berlin2 SoCs Sebastian Hesselbarth
2014-05-13 8:38 ` Sebastian Hesselbarth
2014-05-13 14:47 ` Alexandre Belloni
2014-05-14 22:32 ` Mike Turquette
2014-05-14 23:17 ` Sebastian Hesselbarth
[not found] ` <20140515044106.19795.57249@quantum>
2014-05-15 6:53 ` Sebastian Hesselbarth
2014-05-15 8:34 ` Alexandre Belloni
2014-05-11 20:24 ` [PATCH 3/8] clk: berlin: add driver for BG2x audio/video PLL Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 4/8] clk: berlin: add driver for BG2x simple PLLs Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 5/8] clk: berlin: add driver for BG2x complex divider cells Sebastian Hesselbarth
2014-05-13 8:40 ` Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 6/8] clk: berlin: add core clock driver for BG2/BG2CD Sebastian Hesselbarth
2014-05-14 11:43 ` Alexandre Belloni
2014-05-14 11:48 ` Sebastian Hesselbarth
2014-05-11 20:24 ` [PATCH 7/8] ARM: dts: berlin: convert BG2CD to DT clock nodes Sebastian Hesselbarth
2014-05-12 19:55 ` Sebastian Hesselbarth
2014-05-13 8:42 ` Sebastian Hesselbarth
2014-05-11 20:24 ` Sebastian Hesselbarth [this message]
2014-05-14 20:15 ` [PATCH v2 00/10] Marvell Berlin full clock support Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 01/10] dt-binding: clk: add clock binding docs for Marvell Berlin2 SoCs Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 02/10] clk: berlin: add binding include for BG2/BG2CD clock ids Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 03/10] clk: berlin: add driver for BG2x audio/video PLL Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 04/10] clk: berlin: add driver for BG2x simple PLLs Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 05/10] clk: berlin: add driver for BG2x complex divider cells Sebastian Hesselbarth
2014-05-15 7:56 ` Alexandre Belloni
2014-05-14 20:15 ` [PATCH v2 06/10] clk: berlin: add core clock driver for BG2/BG2CD Sebastian Hesselbarth
2014-05-15 8:09 ` Alexandre Belloni
2014-05-15 15:43 ` Sebastian Hesselbarth
2014-05-15 16:55 ` Alexandre Belloni
2014-05-14 20:15 ` [PATCH v2 07/10] clk: berlin: add core clock driver for BG2Q Sebastian Hesselbarth
2014-05-15 7:46 ` Alexandre Belloni
2014-05-14 20:15 ` [PATCH v2 08/10] ARM: dts: berlin: convert BG2CD to DT clock nodes Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 09/10] ARM: dts: berlin: convert BG2 " Sebastian Hesselbarth
2014-05-14 20:15 ` [PATCH v2 10/10] ARM: dts: berlin: convert BG2Q " Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399839881-29895-9-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=antoine.tenart@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).