linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75
@ 2018-11-12  0:35 Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 01/11] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
                   ` (10 more replies)
  0 siblings, 11 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

Hello,

this patch set somewhat modernizes the Marvel MMP2 CCIC driver. Notably,
it ports it from the platform data (which seems unused as the board
support code never made it) to devicetree.

At the core of the rework is the move to asynchronous sensor discovery
and clock management with the standard clock framework. There are also
some straightforward fixes for bitrotten parts.

There's probably still room for improvement, but as it is, it seems to
work well on OLPC XO-1.75 and doesn't break OLPC XO-1 (I've tested on
both platforms).

Changes since v1:
- "marvell-ccic: drop ctlr_reset()" patch was replaced with a
  straightforward revert of the commit that added ctlr_reset() along with an
  explanation in commit message.
- Added collected Acks
- Other changes are noted in individial patches

Thanks,
Lubo




^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 01/11] media: ov7670: hook s_power onto v4l2 core
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 02/11] media: ov7670: control clock along with power Lubomir Rintel
                   ` (9 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The commit 71862f63f351 ("media: ov7670: Add the ov7670_s_power function")
added a s_power function. For some reason it didn't register it with v4l2,
only uses it internally. Fix this now.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/media/i2c/ov7670.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index bc68a3a5b4ec..d87f2362bf40 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -1651,6 +1651,7 @@ static int ov7670_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 static const struct v4l2_subdev_core_ops ov7670_core_ops = {
 	.reset = ov7670_reset,
 	.init = ov7670_init,
+	.s_power = ov7670_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = ov7670_g_register,
 	.s_register = ov7670_s_register,
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 02/11] media: ov7670: control clock along with power
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 01/11] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-14 14:35   ` Hans Verkuil
  2018-11-12  0:35 ` [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera Lubomir Rintel
                   ` (8 subsequent siblings)
  10 siblings, 1 reply; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

This provides more power saving when the sensor is off.

While at that, do the delay on power/clock enable even if the sensor driver
itself doesn't control the GPIOs. This is required for the OLPC XO-1
platform, that lacks the proper power/reset properties in its DT, but
needs the delay after the sensor is clocked up.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/media/i2c/ov7670.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index d87f2362bf40..a3e72c62382c 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -241,6 +241,7 @@ struct ov7670_info {
 	struct v4l2_mbus_framefmt format;
 	struct ov7670_format_struct *fmt;  /* Current format */
 	struct clk *clk;
+	int on;
 	struct gpio_desc *resetb_gpio;
 	struct gpio_desc *pwdn_gpio;
 	unsigned int mbus_config;	/* Media bus configuration flags */
@@ -1610,15 +1611,26 @@ static int ov7670_s_power(struct v4l2_subdev *sd, int on)
 {
 	struct ov7670_info *info = to_state(sd);
 
+	if (info->on == on)
+		return 0;
+
+	if (on)
+		clk_prepare_enable(info->clk);
+	else
+		clk_disable_unprepare(info->clk);
+
 	if (info->pwdn_gpio)
 		gpiod_set_value(info->pwdn_gpio, !on);
 	if (on && info->resetb_gpio) {
 		gpiod_set_value(info->resetb_gpio, 1);
 		usleep_range(500, 1000);
 		gpiod_set_value(info->resetb_gpio, 0);
-		usleep_range(3000, 5000);
 	}
 
+	if (on && (info->pwdn_gpio || info->resetb_gpio || info->clk))
+		usleep_range(3000, 5000);
+
+	info->on = on;
 	return 0;
 }
 
@@ -1817,24 +1829,20 @@ static int ov7670_probe(struct i2c_client *client,
 		else
 			return ret;
 	}
-	if (info->clk) {
-		ret = clk_prepare_enable(info->clk);
-		if (ret)
-			return ret;
+	ret = ov7670_init_gpio(client, info);
+	if (ret)
+		return ret;
+
+	ov7670_s_power(sd, 1);
 
+	if (info->clk) {
 		info->clock_speed = clk_get_rate(info->clk) / 1000000;
 		if (info->clock_speed < 10 || info->clock_speed > 48) {
 			ret = -EINVAL;
-			goto clk_disable;
+			goto power_off;
 		}
 	}
 
-	ret = ov7670_init_gpio(client, info);
-	if (ret)
-		goto clk_disable;
-
-	ov7670_s_power(sd, 1);
-
 	/* Make sure it's an ov7670 */
 	ret = ov7670_detect(sd);
 	if (ret) {
@@ -1913,6 +1921,7 @@ static int ov7670_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto entity_cleanup;
 
+	ov7670_s_power(sd, 0);
 	return 0;
 
 entity_cleanup:
@@ -1921,12 +1930,9 @@ static int ov7670_probe(struct i2c_client *client,
 	v4l2_ctrl_handler_free(&info->hdl);
 power_off:
 	ov7670_s_power(sd, 0);
-clk_disable:
-	clk_disable_unprepare(info->clk);
 	return ret;
 }
 
-
 static int ov7670_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
@@ -1934,7 +1940,6 @@ static int ov7670_remove(struct i2c_client *client)
 
 	v4l2_async_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&info->hdl);
-	clk_disable_unprepare(info->clk);
 	media_entity_cleanup(&info->sd.entity);
 	ov7670_s_power(sd, 0);
 	return 0;
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 01/11] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 02/11] media: ov7670: control clock along with power Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-17 15:39   ` Rob Herring
  2018-11-12  0:35 ` [PATCH v2 04/11] [media] marvell-ccic: fix DMA s/g desc number calculation Lubomir Rintel
                   ` (7 subsequent siblings)
  10 siblings, 1 reply; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

Add Marvell MMP2 camera host interface.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 .../bindings/media/marvell,mmp2-ccic.txt      | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt

diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
new file mode 100644
index 000000000000..a9c536e58dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
@@ -0,0 +1,30 @@
+Marvell MMP2 camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,mmp2-ccic"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - any required generic properties defined in video-interfaces.txt
+
+Optional properties:
+ - clocks: input clock (see clock-bindings.txt)
+ - clock-output-names: should contain the name of the clock driving the
+                       sensor master clock MCLK
+
+Example:
+
+	camera0: camera@d420a000 {
+		compatible = "marvell,mmp2-ccic";
+		reg = <0xd420a000 0x800>;
+		interrupts = <42>;
+		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+		clock-names = "CCICAXICLK";
+		#clock-cells = <0>;
+		clock-output-names = "mclk";
+
+		port {
+			camera0_0: endpoint {
+				remote-endpoint = <&ov7670_0>;
+			};
+		};
+	};
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 04/11] [media] marvell-ccic: fix DMA s/g desc number calculation
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (2 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 05/11] [media] marvell-ccic: don't generate EOF on parallel bus Lubomir Rintel
                   ` (6 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The commit d790b7eda953 ("[media] vb2-dma-sg: move dma_(un)map_sg here")
left dma_desc_nent unset. It previously contained the number of DMA
descriptors as returned from dma_map_sg().

We can now (since the commit referred to above) obtain the same value from
the sg_table and drop dma_desc_nent altogether.

Tested on OLPC XO-1.75 machine. Doesn't affect the OLPC XO-1's Cafe
driver, since that one doesn't do DMA.

Fixes: d790b7eda953df474f470169ebdf111c02fa7a2d
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index f1b301810260..d97f39bde9bd 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -200,7 +200,6 @@ struct mcam_vb_buffer {
 	struct list_head queue;
 	struct mcam_dma_desc *dma_desc;	/* Descriptor virtual address */
 	dma_addr_t dma_desc_pa;		/* Descriptor physical address */
-	int dma_desc_nent;		/* Number of mapped descriptors */
 };
 
 static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_v4l2_buffer *vb)
@@ -608,9 +607,11 @@ static void mcam_dma_contig_done(struct mcam_camera *cam, int frame)
 static void mcam_sg_next_buffer(struct mcam_camera *cam)
 {
 	struct mcam_vb_buffer *buf;
+	struct sg_table *sg_table;
 
 	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
 	list_del_init(&buf->queue);
+	sg_table = vb2_dma_sg_plane_desc(&buf->vb_buf.vb2_buf, 0);
 	/*
 	 * Very Bad Not Good Things happen if you don't clear
 	 * C1_DESC_ENA before making any descriptor changes.
@@ -618,7 +619,7 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam)
 	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA);
 	mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa);
 	mcam_reg_write(cam, REG_DESC_LEN_Y,
-			buf->dma_desc_nent*sizeof(struct mcam_dma_desc));
+			sg_table->nents*sizeof(struct mcam_dma_desc));
 	mcam_reg_write(cam, REG_DESC_LEN_U, 0);
 	mcam_reg_write(cam, REG_DESC_LEN_V, 0);
 	mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 05/11] [media] marvell-ccic: don't generate EOF on parallel bus
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (3 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 04/11] [media] marvell-ccic: fix DMA s/g desc number calculation Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 06/11] Revert "[media] marvell-ccic: reset ccic phy when stop streaming for stability" Lubomir Rintel
                   ` (5 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The commit 05fed81625bf ("[media] marvell-ccic: add MIPI support for
marvell-ccic driver") that claimed to add CSI2 turned on C0_EOF_VSYNC for
parallel bus without a very good explanation.

That broke camera on OLPC XO-1.75 which precisely uses a sensor on a
parallel bus. Revert that chunk.

Tested on an OLPC XO-1.75.

Fixes: 05fed81625bf755cc67c5864cdfd18b69ea828d1
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index d97f39bde9bd..d24e5b7a3bc5 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -792,12 +792,6 @@ static void mcam_ctlr_image(struct mcam_camera *cam)
 	 * Make sure it knows we want to use hsync/vsync.
 	 */
 	mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK);
-	/*
-	 * This field controls the generation of EOF(DVP only)
-	 */
-	if (cam->bus_type != V4L2_MBUS_CSI2_DPHY)
-		mcam_reg_set_bit(cam, REG_CTRL0,
-				C0_EOF_VSYNC | C0_VEDGE_CTRL);
 }
 
 
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 06/11] Revert "[media] marvell-ccic: reset ccic phy when stop streaming for stability"
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (4 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 05/11] [media] marvell-ccic: don't generate EOF on parallel bus Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 07/11] [media] marvell-ccic: drop unused stuff Lubomir Rintel
                   ` (4 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

This accesses the clock registers directly and thus is going to stay in the
way of making the driver devicetree friendly.

No boards seems to actually use this. If it's somehow actually needed it
needs to be done differently.

This reverts commit 7c269f454e7a51b151d94f99344120efa1cd0acb.
---
 .../media/platform/marvell-ccic/mcam-core.c   |  6 -----
 .../media/platform/marvell-ccic/mcam-core.h   |  2 --
 .../media/platform/marvell-ccic/mmp-driver.c  | 25 -------------------
 3 files changed, 33 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index d24e5b7a3bc5..1b879035948c 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1154,12 +1154,6 @@ static void mcam_vb_stop_streaming(struct vb2_queue *vq)
 	if (cam->state != S_STREAMING)
 		return;
 	mcam_ctlr_stop_dma(cam);
-	/*
-	 * Reset the CCIC PHY after stopping streaming,
-	 * otherwise, the CCIC may be unstable.
-	 */
-	if (cam->ctlr_reset)
-		cam->ctlr_reset(cam);
 	/*
 	 * VB2 reclaims the buffers, so we need to forget
 	 * about them.
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index ad8955f9f0a1..a3a097a45e78 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -116,7 +116,6 @@ struct mcam_camera {
 	int mclk_src;	/* which clock source the mclk derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 
-	int ccic_id;
 	enum v4l2_mbus_type bus_type;
 	/* MIPI support */
 	/* The dphy config value, allocated in board file
@@ -137,7 +136,6 @@ struct mcam_camera {
 	int (*plat_power_up) (struct mcam_camera *cam);
 	void (*plat_power_down) (struct mcam_camera *cam);
 	void (*calc_dphy) (struct mcam_camera *cam);
-	void (*ctlr_reset) (struct mcam_camera *cam);
 
 	/*
 	 * Everything below here is private to the mcam core and
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 70a2833db0d1..dbfc597b955d 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -105,7 +105,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
 #define CPU_SUBSYS_PMU_BASE	0xd4282800
 #define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
 #define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
-#define REG_CCIC2_CRCR		0xf4	/* CCIC2 clk reset ctrl reg	*/
 
 static void mcam_clk_enable(struct mcam_camera *mcam)
 {
@@ -183,28 +182,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
 	mcam_clk_disable(mcam);
 }
 
-static void mcam_ctlr_reset(struct mcam_camera *mcam)
-{
-	unsigned long val;
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-
-	if (mcam->ccic_id) {
-		/*
-		 * Using CCIC2
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
-	} else {
-		/*
-		 * Using CCIC1
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
-	}
-}
-
 /*
  * calc the dphy register values
  * There are three dphy registers being used.
@@ -352,11 +329,9 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam = &cam->mcam;
 	mcam->plat_power_up = mmpcam_power_up;
 	mcam->plat_power_down = mmpcam_power_down;
-	mcam->ctlr_reset = mcam_ctlr_reset;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->ccic_id = pdev->id;
 	mcam->mclk_min = pdata->mclk_min;
 	mcam->mclk_src = pdata->mclk_src;
 	mcam->mclk_div = pdata->mclk_div;
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 07/11] [media] marvell-ccic: drop unused stuff
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (5 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 06/11] Revert "[media] marvell-ccic: reset ccic phy when stop streaming for stability" Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 08/11] [media] marvell-ccic/mmp: enable clock before accessing registers Lubomir Rintel
                   ` (3 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

Remove structure members and headers that are not actually used. Saves
us from some noise in subsequent cleanup commits.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/media/platform/marvell-ccic/mcam-core.c  | 1 -
 drivers/media/platform/marvell-ccic/mcam-core.h  | 2 --
 drivers/media/platform/marvell-ccic/mmp-driver.c | 2 --
 include/linux/platform_data/media/mmp-camera.h   | 1 -
 4 files changed, 6 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 1b879035948c..0113b8d37d03 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1776,7 +1776,6 @@ int mccic_register(struct mcam_camera *cam)
 	 */
 	sensor_cfg.clock_speed = cam->clock_speed;
 	sensor_cfg.use_smbus = cam->use_smbus;
-	cam->sensor_addr = ov7670_info.addr;
 	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
 			cam->i2c_adapter, &ov7670_info, NULL);
 	if (cam->sensor == NULL) {
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index a3a097a45e78..b828b1bb59d3 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -112,7 +112,6 @@ struct mcam_camera {
 	short int use_smbus;	/* SMBUS or straight I2c? */
 	enum mcam_buffer_mode buffer_mode;
 
-	int mclk_min;	/* The minimal value of mclk */
 	int mclk_src;	/* which clock source the mclk derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 
@@ -152,7 +151,6 @@ struct mcam_camera {
 	 */
 	struct video_device vdev;
 	struct v4l2_subdev *sensor;
-	unsigned short sensor_addr;
 
 	/* Videobuf2 stuff */
 	struct vb2_queue vb_queue;
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index dbfc597b955d..f2e43b23af18 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/i2c-gpio.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -332,7 +331,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->mclk_min = pdata->mclk_min;
 	mcam->mclk_src = pdata->mclk_src;
 	mcam->mclk_div = pdata->mclk_div;
 	mcam->bus_type = pdata->bus_type;
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index d2d3a443eedf..4c3a80a45883 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -16,7 +16,6 @@ struct mmp_camera_platform_data {
 	int sensor_power_gpio;
 	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
-	int mclk_min;	/* The minimal value of MCLK */
 	int mclk_src;	/* which clock source the MCLK derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
 	/*
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 08/11] [media] marvell-ccic/mmp: enable clock before accessing registers
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (6 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 07/11] [media] marvell-ccic: drop unused stuff Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 09/11] [media] marvell-ccic/mmp: add devicetree support Lubomir Rintel
                   ` (2 subsequent siblings)
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The access to REG_CLKCTRL or REG_CTRL1 without the clock enabled hangs
the machine. Enable the clock first.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 drivers/media/platform/marvell-ccic/mmp-driver.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index f2e43b23af18..05cba74c0d13 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -144,6 +144,7 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
  * Turn on power and clocks to the controller.
  */
 	mmpcam_power_up_ctlr(cam);
+	mcam_clk_enable(mcam);
 /*
  * Provide power to the sensor.
  */
@@ -157,8 +158,6 @@ static int mmpcam_power_up(struct mcam_camera *mcam)
 	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
 	mdelay(5);
 
-	mcam_clk_enable(mcam);
-
 	return 0;
 }
 
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 09/11] [media] marvell-ccic/mmp: add devicetree support
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (7 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 08/11] [media] marvell-ccic/mmp: enable clock before accessing registers Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor Lubomir Rintel
  2018-11-12  0:35 ` [PATCH v2 11/11] [media] marvell-ccic: provide a clock for " Lubomir Rintel
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The platform data is actually not used anywhere (along with the CSI
support) and should be safe to remove.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

---
Changes since v1:
- s/This are/These are/ in a comment

 .../media/platform/marvell-ccic/mmp-driver.c  | 36 ++++++++++++++-----
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 05cba74c0d13..0f65dbd1de66 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -19,6 +19,8 @@
 #include <media/v4l2-device.h>
 #include <linux/platform_data/media/mmp-camera.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
@@ -196,6 +198,9 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam)
 	struct device *dev = &cam->pdev->dev;
 	unsigned long tx_clk_esc;
 
+	if (!pdata)
+		return;
+
 	/*
 	 * If CSI2_DPHY3 is calculated dynamically,
 	 * pdata->lane_clk should be already set
@@ -314,10 +319,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	struct mmp_camera_platform_data *pdata;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata)
-		return -ENODEV;
-
 	cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL);
 	if (cam == NULL)
 		return -ENOMEM;
@@ -330,17 +331,29 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-	mcam->mclk_src = pdata->mclk_src;
-	mcam->mclk_div = pdata->mclk_div;
-	mcam->bus_type = pdata->bus_type;
-	mcam->dphy = pdata->dphy;
+	pdata = pdev->dev.platform_data;
+	if (pdata) {
+		mcam->mclk_src = pdata->mclk_src;
+		mcam->mclk_div = pdata->mclk_div;
+		mcam->bus_type = pdata->bus_type;
+		mcam->dphy = pdata->dphy;
+		mcam->lane = pdata->lane;
+	} else {
+		/*
+		 * These are values that used to be hardcoded in mcam-core and
+		 * work well on a OLPC XO 1.75 with a parallel bus sensor.
+		 * If it turns out other setups make sense, the values should
+		 * be obtained from the device tree.
+		 */
+		mcam->mclk_src = 3;
+		mcam->mclk_div = 2;
+	}
 	if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) {
 		cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
 		if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
 			return PTR_ERR(cam->mipi_clk);
 	}
 	mcam->mipi_enabled = false;
-	mcam->lane = pdata->lane;
 	mcam->chip_id = MCAM_ARMADA610;
 	mcam->buffer_mode = B_DMA_sg;
 	strscpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info));
@@ -475,6 +488,10 @@ static int mmpcam_resume(struct platform_device *pdev)
 
 #endif
 
+static const struct of_device_id mmpcam_of_match[] = {
+	{ .compatible = "marvell,mmp2-ccic", },
+	{},
+};
 
 static struct platform_driver mmpcam_driver = {
 	.probe		= mmpcam_probe,
@@ -485,6 +502,7 @@ static struct platform_driver mmpcam_driver = {
 #endif
 	.driver = {
 		.name	= "mmp-camera",
+		.of_match_table = of_match_ptr(mmpcam_of_match),
 	}
 };
 
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (8 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 09/11] [media] marvell-ccic/mmp: add devicetree support Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  2018-11-12 22:06   ` kbuild test robot
  2018-11-12  0:35 ` [PATCH v2 11/11] [media] marvell-ccic: provide a clock for " Lubomir Rintel
  10 siblings, 1 reply; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

An instance of a sensor on DT-based MMP2 platform is always going to be
created asynchronously.

Let's move the manual device creation away from the core to the Cafe
driver (used on OLPC XO-1, not present in DT) and set up appropriate
async matches: I2C on Cafe, FWNODE on MMP (OLPC XO-1.75).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 .../media/platform/marvell-ccic/cafe-driver.c |  49 ++++--
 .../media/platform/marvell-ccic/mcam-core.c   | 157 ++++++++++++------
 .../media/platform/marvell-ccic/mcam-core.h   |   5 +-
 .../media/platform/marvell-ccic/mmp-driver.c  |  27 +--
 .../linux/platform_data/media/mmp-camera.h    |   1 -
 5 files changed, 162 insertions(+), 77 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
index 2986cb4b88d0..0164afc405d1 100644
--- a/drivers/media/platform/marvell-ccic/cafe-driver.c
+++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
@@ -8,6 +8,7 @@
  *
  * Copyright 2006-11 One Laptop Per Child Association, Inc.
  * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  *
  * Written by Jonathan Corbet, corbet@lwn.net.
  *
@@ -27,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/i2c/ov7670.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
@@ -52,6 +54,7 @@ struct cafe_camera {
 	int registered;			/* Fully initialized? */
 	struct mcam_camera mcam;
 	struct pci_dev *pdev;
+	struct i2c_adapter *i2c_adapter;
 	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
 };
 
@@ -351,15 +354,15 @@ static int cafe_smbus_setup(struct cafe_camera *cam)
 		return ret;
 	}
 
-	cam->mcam.i2c_adapter = adap;
+	cam->i2c_adapter = adap;
 	cafe_smbus_enable_irq(cam);
 	return 0;
 }
 
 static void cafe_smbus_shutdown(struct cafe_camera *cam)
 {
-	i2c_del_adapter(cam->mcam.i2c_adapter);
-	kfree(cam->mcam.i2c_adapter);
+	i2c_del_adapter(cam->i2c_adapter);
+	kfree(cam->i2c_adapter);
 }
 
 
@@ -452,6 +455,29 @@ static irqreturn_t cafe_irq(int irq, void *data)
 	return IRQ_RETVAL(handled);
 }
 
+/* -------------------------------------------------------------------------- */
+
+static struct ov7670_config sensor_cfg = {
+	/*
+	 * Exclude QCIF mode, because it only captures a tiny portion
+	 * of the sensor FOV
+	 */
+	.min_width = 320,
+	.min_height = 240,
+
+	/*
+	 * Set the clock speed for the XO 1; I don't believe this
+	 * driver has ever run anywhere else.
+	 */
+	.clock_speed = 45,
+	.use_smbus = 1,
+};
+
+struct i2c_board_info ov7670_info = {
+	.type = "ov7670",
+	.addr = 0x42 >> 1,
+	.platform_data = &sensor_cfg,
+};
 
 /* -------------------------------------------------------------------------- */
 /*
@@ -481,12 +507,6 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	mcam->plat_power_down = cafe_ctlr_power_down;
 	mcam->dev = &pdev->dev;
 	snprintf(mcam->bus_info, sizeof(mcam->bus_info), "PCI:%s", pci_name(pdev));
-	/*
-	 * Set the clock speed for the XO 1; I don't believe this
-	 * driver has ever run anywhere else.
-	 */
-	mcam->clock_speed = 45;
-	mcam->use_smbus = 1;
 	/*
 	 * Vmalloc mode for buffers is traditional with this driver.
 	 * We *might* be able to run DMA_contig, especially on a system
@@ -527,12 +547,21 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		goto out_pdown;
 
+	mcam->asd.match_type = V4L2_ASYNC_MATCH_I2C;
+	mcam->asd.match.i2c.adapter_id = i2c_adapter_id(cam->i2c_adapter);
+	mcam->asd.match.i2c.address = ov7670_info.addr;
+
 	ret = mccic_register(mcam);
-	if (ret == 0) {
+	if (ret)
+		goto out_smbus_shutdown;
+
+	if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
 		cam->registered = 1;
 		return 0;
 	}
 
+	cafe_shutdown(cam);
+out_smbus_shutdown:
 	cafe_smbus_shutdown(cam);
 out_pdown:
 	cafe_ctlr_power_down(mcam);
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 0113b8d37d03..87812b7287f0 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -4,6 +4,7 @@
  * so it needs platform-specific support outside of the core.
  *
  * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -26,7 +27,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-event.h>
-#include <media/i2c/ov7670.h>
 #include <media/videobuf2-vmalloc.h>
 #include <media/videobuf2-dma-contig.h>
 #include <media/videobuf2-dma-sg.h>
@@ -93,6 +93,9 @@ MODULE_PARM_DESC(buffer_mode,
 #define sensor_call(cam, o, f, args...) \
 	v4l2_subdev_call(cam->sensor, o, f, ##args)
 
+#define notifier_to_mcam(notifier) \
+	container_of(notifier, struct mcam_camera, notifier)
+
 static struct mcam_format_struct {
 	__u8 *desc;
 	__u32 pixelformat;
@@ -1715,23 +1718,94 @@ EXPORT_SYMBOL_GPL(mccic_irq);
 /*
  * Registration and such.
  */
-static struct ov7670_config sensor_cfg = {
+
+static int mccic_notify_bound(struct v4l2_async_notifier *notifier,
+	struct v4l2_subdev *subdev, struct v4l2_async_subdev *asd)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->sensor) {
+		cam_err(cam, "sensor already bound\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	v4l2_set_subdev_hostdata(subdev, cam);
+	cam->sensor = subdev;
+
+	ret = mcam_cam_init(cam);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	ret = mcam_setup_vb2(cam);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	cam->vdev = mcam_v4l_template;
+	cam->vdev.v4l2_dev = &cam->v4l2_dev;
+	cam->vdev.lock = &cam->s_mutex;
+	cam->vdev.queue = &cam->vb_queue;
+	video_set_drvdata(&cam->vdev, cam);
+	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret) {
+		cam->sensor = NULL;
+		goto out;
+	}
+
+	cam_dbg(cam, "sensor %s bound\n", subdev->name);
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static void mccic_notify_unbind(struct v4l2_async_notifier *notifier,
+	struct v4l2_subdev *subdev, struct v4l2_async_subdev *asd)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->sensor != subdev) {
+		cam_err(cam, "sensor %s not bound\n", subdev->name);
+		goto out;
+	}
+
+	video_unregister_device(&cam->vdev);
+	cam->sensor = NULL;
+	cam_dbg(cam, "sensor %s unbound\n", subdev->name);
+
+out:
+	mutex_unlock(&cam->s_mutex);
+}
+
+static int mccic_notify_complete(struct v4l2_async_notifier *notifier)
+{
+	struct mcam_camera *cam = notifier_to_mcam(notifier);
+	int ret;
+
 	/*
-	 * Exclude QCIF mode, because it only captures a tiny portion
-	 * of the sensor FOV
+	 * Get the v4l2 setup done.
 	 */
-	.min_width = 320,
-	.min_height = 240,
-};
+	ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
+	if (!ret)
+		cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
+
+	return ret;
+}
 
+static const struct v4l2_async_notifier_operations mccic_notify_ops = {
+	.bound = mccic_notify_bound,
+	.unbind = mccic_notify_unbind,
+	.complete = mccic_notify_complete,
+};
 
 int mccic_register(struct mcam_camera *cam)
 {
-	struct i2c_board_info ov7670_info = {
-		.type = "ov7670",
-		.addr = 0x42 >> 1,
-		.platform_data = &sensor_cfg,
-	};
 	int ret;
 
 	/*
@@ -1744,17 +1818,20 @@ int mccic_register(struct mcam_camera *cam)
 		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n");
 		cam->buffer_mode = B_vmalloc;
 	}
+
 	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
 		printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
 				cam->buffer_mode);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
+
 	/*
 	 * Register with V4L
 	 */
 	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
 	if (ret)
-		return ret;
+		goto out;
 
 	mutex_init(&cam->s_mutex);
 	cam->state = S_NOTREADY;
@@ -1764,43 +1841,20 @@ int mccic_register(struct mcam_camera *cam)
 	mcam_ctlr_init(cam);
 
 	/*
-	 * Get the v4l2 setup done.
+	 * Register sensor notifier.
 	 */
-	ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
-	if (ret)
-		goto out_unregister;
-	cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
-
-	/*
-	 * Try to find the sensor.
-	 */
-	sensor_cfg.clock_speed = cam->clock_speed;
-	sensor_cfg.use_smbus = cam->use_smbus;
-	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
-			cam->i2c_adapter, &ov7670_info, NULL);
-	if (cam->sensor == NULL) {
-		ret = -ENODEV;
-		goto out_unregister;
+	v4l2_async_notifier_init(&cam->notifier);
+	ret = v4l2_async_notifier_add_subdev(&cam->notifier, &cam->asd);
+	if (ret) {
+		cam_warn(cam, "failed to add subdev to a notifier");
+		goto out;
 	}
 
-	ret = mcam_cam_init(cam);
-	if (ret)
-		goto out_unregister;
-
-	ret = mcam_setup_vb2(cam);
-	if (ret)
-		goto out_unregister;
-
-	mutex_lock(&cam->s_mutex);
-	cam->vdev = mcam_v4l_template;
-	cam->vdev.v4l2_dev = &cam->v4l2_dev;
-	cam->vdev.lock = &cam->s_mutex;
-	cam->vdev.queue = &cam->vb_queue;
-	video_set_drvdata(&cam->vdev, cam);
-	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
-	if (ret) {
-		mutex_unlock(&cam->s_mutex);
-		goto out_unregister;
+	cam->notifier.ops = &mccic_notify_ops;
+	ret = v4l2_async_notifier_register(&cam->v4l2_dev, &cam->notifier);
+	if (ret < 0) {
+		cam_warn(cam, "failed to register a sensor notifier");
+		goto out;
 	}
 
 	/*
@@ -1811,11 +1865,10 @@ int mccic_register(struct mcam_camera *cam)
 			cam_warn(cam, "Unable to alloc DMA buffers at load will try again later.");
 	}
 
-	mutex_unlock(&cam->s_mutex);
 	return 0;
 
-out_unregister:
-	v4l2_ctrl_handler_free(&cam->ctrl_handler);
+out:
+	v4l2_async_notifier_unregister(&cam->notifier);
 	v4l2_device_unregister(&cam->v4l2_dev);
 	return ret;
 }
@@ -1835,8 +1888,8 @@ void mccic_shutdown(struct mcam_camera *cam)
 	}
 	if (cam->buffer_mode == B_vmalloc)
 		mcam_free_dma_bufs(cam);
-	video_unregister_device(&cam->vdev);
 	v4l2_ctrl_handler_free(&cam->ctrl_handler);
+	v4l2_async_notifier_unregister(&cam->notifier);
 	v4l2_device_unregister(&cam->v4l2_dev);
 }
 EXPORT_SYMBOL_GPL(mccic_shutdown);
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index b828b1bb59d3..4a72213aca1a 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -102,14 +102,11 @@ struct mcam_camera {
 	 * These fields should be set by the platform code prior to
 	 * calling mcam_register().
 	 */
-	struct i2c_adapter *i2c_adapter;
 	unsigned char __iomem *regs;
 	unsigned regs_size; /* size in bytes of the register space */
 	spinlock_t dev_lock;
 	struct device *dev; /* For messages, dma alloc */
 	enum mcam_chip_id chip_id;
-	short int clock_speed;	/* Sensor clock speed, default 30 */
-	short int use_smbus;	/* SMBUS or straight I2c? */
 	enum mcam_buffer_mode buffer_mode;
 
 	int mclk_src;	/* which clock source the mclk derives from */
@@ -150,6 +147,8 @@ struct mcam_camera {
 	 * Subsystem structures.
 	 */
 	struct video_device vdev;
+	struct v4l2_async_notifier notifier;
+	struct v4l2_async_subdev asd;
 	struct v4l2_subdev *sensor;
 
 	/* Videobuf2 stuff */
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 0f65dbd1de66..05aebd6ee25c 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -3,6 +3,7 @@
  * to work with the Armada 610 as used in the OLPC 1.75 system.
  *
  * Copyright 2011 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk>
  *
  * This file may be distributed under the terms of the GNU General
  * Public License, version 2.
@@ -11,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -316,6 +316,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	struct mmp_camera *cam;
 	struct mcam_camera *mcam;
 	struct resource *res;
+	struct fwnode_handle *ep;
 	struct mmp_camera_platform_data *pdata;
 	int ret;
 
@@ -330,7 +331,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam->plat_power_down = mmpcam_power_down;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
-	mcam->use_smbus = 0;
 	pdata = pdev->dev.platform_data;
 	if (pdata) {
 		mcam->mclk_src = pdata->mclk_src;
@@ -374,15 +374,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(cam->power_regs))
 		return PTR_ERR(cam->power_regs);
-	/*
-	 * Find the i2c adapter.  This assumes, of course, that the
-	 * i2c bus is already up and functioning.
-	 */
-	mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
-	if (mcam->i2c_adapter == NULL) {
-		dev_err(&pdev->dev, "No i2c adapter\n");
-		return -ENODEV;
-	}
 	/*
 	 * Sensor GPIO pins.
 	 */
@@ -405,6 +396,19 @@ static int mmpcam_probe(struct platform_device *pdev)
 
 	mcam_init_clk(mcam);
 
+	/*
+	 * Create a match of the sensor against its OF node.
+	 */
+	ep = fwnode_graph_get_next_endpoint(of_fwnode_handle(pdev->dev.of_node),
+					    NULL);
+	if (!ep)
+		return -ENODEV;
+
+	mcam->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+	mcam->asd.match.fwnode = fwnode_graph_get_remote_port_parent(ep);
+
+	fwnode_handle_put(ep);
+
 	/*
 	 * Power the device up and hand it off to the core.
 	 */
@@ -414,6 +418,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	ret = mccic_register(mcam);
 	if (ret)
 		goto out_power_down;
+
 	/*
 	 * Finally, set up our IRQ now that the core is ready to
 	 * deal with it.
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index 4c3a80a45883..c573ebc40035 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -12,7 +12,6 @@ enum dphy3_algo {
 };
 
 struct mmp_camera_platform_data {
-	struct platform_device *i2c_device;
 	int sensor_power_gpio;
 	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v2 11/11] [media] marvell-ccic: provide a clock for the sensor
  2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
                   ` (9 preceding siblings ...)
  2018-11-12  0:35 ` [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor Lubomir Rintel
@ 2018-11-12  0:35 ` Lubomir Rintel
  10 siblings, 0 replies; 15+ messages in thread
From: Lubomir Rintel @ 2018-11-12  0:35 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

The sensor needs the MCLK clock running when it's being probed. On
platforms where the sensor is instantiated from a DT (MMP2) it is going
to happen asynchronously.

Therefore, the current modus operandi, where the bridge driver fiddles
with the sensor power and clock itself is not going to fly. As the comments
wisely note, this doesn't even belong there.

Luckily, the ov7670 driver is already able to control its power and
reset lines, we can just drop the MMP platform glue altogether.

It also requests the clock via the standard clock subsystem. Good -- let's
set up a clock instance so that the sensor can ask us to enable the clock.
Note that this is pretty dumb at the moment: the clock is hardwired to a
particular frequency and parent. It was always the case.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v1:
- [kbuild/ia64] depend on COMMON_CLK.
- [smatch] fix bad return in mcam_v4l_open() leading to lock not getting
  released on error.

 drivers/media/platform/marvell-ccic/Kconfig   |   2 +
 .../media/platform/marvell-ccic/cafe-driver.c |  11 +-
 .../media/platform/marvell-ccic/mcam-core.c   | 156 +++++++++++++++---
 .../media/platform/marvell-ccic/mcam-core.h   |   3 +
 .../media/platform/marvell-ccic/mmp-driver.c  | 152 ++---------------
 .../linux/platform_data/media/mmp-camera.h    |   2 -
 6 files changed, 162 insertions(+), 164 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig
index cf12e077203a..3e12eb25740a 100644
--- a/drivers/media/platform/marvell-ccic/Kconfig
+++ b/drivers/media/platform/marvell-ccic/Kconfig
@@ -1,6 +1,7 @@
 config VIDEO_CAFE_CCIC
 	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
 	depends on PCI && I2C && VIDEO_V4L2
+	depends on COMMON_CLK
 	select VIDEO_OV7670
 	select VIDEOBUF2_VMALLOC
 	select VIDEOBUF2_DMA_CONTIG
@@ -14,6 +15,7 @@ config VIDEO_MMP_CAMERA
 	tristate "Marvell Armada 610 integrated camera controller support"
 	depends on I2C && VIDEO_V4L2
 	depends on ARCH_MMP || COMPILE_TEST
+	depends on COMMON_CLK
 	select VIDEO_OV7670
 	select I2C_GPIO
 	select VIDEOBUF2_VMALLOC
diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
index 0164afc405d1..0e712bb941ba 100644
--- a/drivers/media/platform/marvell-ccic/cafe-driver.c
+++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
@@ -33,6 +33,7 @@
 #include <linux/wait.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include "mcam-core.h"
 
@@ -533,11 +534,10 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 		goto out_iounmap;
 
 	/*
-	 * Initialize the controller and leave it powered up.  It will
-	 * stay that way until the sensor driver shows up.
+	 * Initialize the controller.
 	 */
 	cafe_ctlr_init(mcam);
-	cafe_ctlr_power_up(mcam);
+
 	/*
 	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
 	 * because the sensor could attach in this call chain, leading to
@@ -555,12 +555,15 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		goto out_smbus_shutdown;
 
+	clkdev_create(mcam->mclk, "xclk", "%d-%04x",
+		i2c_adapter_id(cam->i2c_adapter), ov7670_info.addr);
+
 	if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
 		cam->registered = 1;
 		return 0;
 	}
 
-	cafe_shutdown(cam);
+	mccic_shutdown(mcam);
 out_smbus_shutdown:
 	cafe_smbus_shutdown(cam);
 out_pdown:
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 87812b7287f0..982fbac6472d 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -303,9 +304,6 @@ static void mcam_enable_mipi(struct mcam_camera *mcam)
 		 */
 		mcam_reg_write(mcam, REG_CSI2_CTRL0,
 			CSI2_C0_MIPI_EN | CSI2_C0_ACT_LANE(mcam->lane));
-		mcam_reg_write(mcam, REG_CLKCTRL,
-			(mcam->mclk_src << 29) | mcam->mclk_div);
-
 		mcam->mipi_enabled = true;
 	}
 }
@@ -846,11 +844,6 @@ static void mcam_ctlr_init(struct mcam_camera *cam)
 	 * but it's good to be sure.
 	 */
 	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-	/*
-	 * Clock the sensor appropriately.  Controller clock should
-	 * be 48MHz, sensor "typical" value is half that.
-	 */
-	mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
 }
 
@@ -898,14 +891,15 @@ static int mcam_ctlr_power_up(struct mcam_camera *cam)
 	int ret;
 
 	spin_lock_irqsave(&cam->dev_lock, flags);
-	ret = cam->plat_power_up(cam);
-	if (ret) {
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		return ret;
+	if (cam->plat_power_up) {
+		ret = cam->plat_power_up(cam);
+		if (ret) {
+			spin_unlock_irqrestore(&cam->dev_lock, flags);
+			return ret;
+		}
 	}
 	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5); /* Just to be sure */
 	return 0;
 }
 
@@ -920,10 +914,101 @@ static void mcam_ctlr_power_down(struct mcam_camera *cam)
 	 * power down routine.
 	 */
 	mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
-	cam->plat_power_down(cam);
+	if (cam->plat_power_down)
+		cam->plat_power_down(cam);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
 }
 
+/* ---------------------------------------------------------------------- */
+/*
+ * Controller clocks.
+ */
+static void mcam_clk_enable(struct mcam_camera *mcam)
+{
+	unsigned int i;
+
+	for (i = 0; i < NR_MCAM_CLK; i++) {
+		if (!IS_ERR(mcam->clk[i]))
+			clk_prepare_enable(mcam->clk[i]);
+	}
+}
+
+static void mcam_clk_disable(struct mcam_camera *mcam)
+{
+	int i;
+
+	for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
+		if (!IS_ERR(mcam->clk[i]))
+			clk_disable_unprepare(mcam->clk[i]);
+	}
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Master sensor clock.
+ */
+static int mclk_prepare(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	clk_prepare(cam->clk[0]);
+	return 0;
+}
+
+static void mclk_unprepare(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	clk_unprepare(cam->clk[0]);
+}
+
+static int mclk_enable(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+	int mclk_src;
+	int mclk_div;
+
+	/*
+	 * Clock the sensor appropriately.  Controller clock should
+	 * be 48MHz, sensor "typical" value is half that.
+	 */
+	if (cam->bus_type == V4L2_MBUS_CSI2_DPHY) {
+		mclk_src = cam->mclk_src;
+		mclk_div = cam->mclk_div;
+	} else {
+		mclk_src = 3;
+		mclk_div = 2;
+	}
+
+	clk_enable(cam->clk[0]);
+	mcam_reg_write(cam, REG_CLKCTRL, (mclk_src << 29) | mclk_div);
+	mcam_ctlr_power_up(cam);
+
+	return 0;
+}
+
+static void mclk_disable(struct clk_hw *hw)
+{
+	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
+
+	mcam_ctlr_power_down(cam);
+	clk_disable(cam->clk[0]);
+}
+
+static unsigned long mclk_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	return 48000000;
+}
+
+static const struct clk_ops mclk_ops = {
+	.prepare = mclk_prepare,
+	.unprepare = mclk_unprepare,
+	.enable = mclk_enable,
+	.disable = mclk_disable,
+	.recalc_rate = mclk_recalc_rate,
+};
+
 /* -------------------------------------------------------------------- */
 /*
  * Communications with the sensor.
@@ -948,7 +1033,6 @@ static int mcam_cam_init(struct mcam_camera *cam)
 	ret = __mcam_cam_reset(cam);
 	/* Get/set parameters? */
 	cam->state = S_IDLE;
-	mcam_ctlr_power_down(cam);
 	return ret;
 }
 
@@ -1584,9 +1668,10 @@ static int mcam_v4l_open(struct file *filp)
 	if (ret)
 		goto out;
 	if (v4l2_fh_is_singular_file(filp)) {
-		ret = mcam_ctlr_power_up(cam);
+		ret = sensor_call(cam, core, s_power, 1);
 		if (ret)
 			goto out;
+		mcam_clk_enable(cam);
 		__mcam_cam_reset(cam);
 		mcam_set_config_needed(cam, 1);
 	}
@@ -1608,7 +1693,8 @@ static int mcam_v4l_release(struct file *filp)
 	_vb2_fop_release(filp, NULL);
 	if (last_open) {
 		mcam_disable_mipi(cam);
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
+		mcam_clk_disable(cam);
 		if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read)
 			mcam_free_dma_bufs(cam);
 	}
@@ -1806,6 +1892,7 @@ static const struct v4l2_async_notifier_operations mccic_notify_ops = {
 
 int mccic_register(struct mcam_camera *cam)
 {
+	struct clk_init_data mclk_init = { };
 	int ret;
 
 	/*
@@ -1838,7 +1925,10 @@ int mccic_register(struct mcam_camera *cam)
 	mcam_set_config_needed(cam, 1);
 	cam->pix_format = mcam_def_pix_format;
 	cam->mbus_code = mcam_def_mbus_code;
-	mcam_ctlr_init(cam);
+
+	mcam_clk_enable(cam);
+	mcam_ctlr_init(cam); // XXX?
+	mcam_clk_disable(cam);
 
 	/*
 	 * Register sensor notifier.
@@ -1857,6 +1947,26 @@ int mccic_register(struct mcam_camera *cam)
 		goto out;
 	}
 
+	/*
+	 * Register sensor master clock.
+	 */
+	mclk_init.parent_names = NULL;
+	mclk_init.num_parents = 0;
+	mclk_init.ops = &mclk_ops;
+	mclk_init.name = "mclk";
+
+	of_property_read_string(cam->dev->of_node, "clock-output-names",
+							&mclk_init.name);
+
+	cam->mclk_hw.init = &mclk_init;
+
+	cam->mclk = devm_clk_register(cam->dev, &cam->mclk_hw);
+	if (IS_ERR(cam->mclk)) {
+		ret = PTR_ERR(cam->mclk);
+		dev_err(cam->dev, "can't register clock\n");
+		goto out;
+	}
+
 	/*
 	 * If so requested, try to get our DMA buffers now.
 	 */
@@ -1884,7 +1994,7 @@ void mccic_shutdown(struct mcam_camera *cam)
 	 */
 	if (!list_empty(&cam->vdev.fh_list)) {
 		cam_warn(cam, "Removing a device with users!\n");
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
 	}
 	if (cam->buffer_mode == B_vmalloc)
 		mcam_free_dma_bufs(cam);
@@ -1906,7 +2016,8 @@ void mccic_suspend(struct mcam_camera *cam)
 		enum mcam_state cstate = cam->state;
 
 		mcam_ctlr_stop_dma(cam);
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
+		mcam_clk_disable(cam);
 		cam->state = cstate;
 	}
 	mutex_unlock(&cam->s_mutex);
@@ -1919,14 +2030,15 @@ int mccic_resume(struct mcam_camera *cam)
 
 	mutex_lock(&cam->s_mutex);
 	if (!list_empty(&cam->vdev.fh_list)) {
-		ret = mcam_ctlr_power_up(cam);
+		mcam_clk_enable(cam);
+		ret = sensor_call(cam, core, s_power, 1);
 		if (ret) {
 			mutex_unlock(&cam->s_mutex);
 			return ret;
 		}
 		__mcam_cam_reset(cam);
 	} else {
-		mcam_ctlr_power_down(cam);
+		sensor_call(cam, core, s_power, 0);
 	}
 	mutex_unlock(&cam->s_mutex);
 
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index 4a72213aca1a..2e3a7567a76a 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -8,6 +8,7 @@
 #define _MCAM_CORE_H
 
 #include <linux/list.h>
+#include <linux/clk-provider.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
@@ -125,6 +126,8 @@ struct mcam_camera {
 
 	/* clock tree support */
 	struct clk *clk[NR_MCAM_CLK];
+	struct clk_hw mclk_hw;
+	struct clk *mclk;
 
 	/*
 	 * Callbacks from the core to the platform code.
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 05aebd6ee25c..56895a48de06 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -22,9 +22,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/pm.h>
 #include <linux/clk.h>
@@ -38,7 +36,6 @@ MODULE_LICENSE("GPL");
 static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"};
 
 struct mmp_camera {
-	void __iomem *power_regs;
 	struct platform_device *pdev;
 	struct mcam_camera mcam;
 	struct list_head devlist;
@@ -94,94 +91,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
 	return NULL;
 }
 
-
-
-
-/*
- * Power-related registers; this almost certainly belongs
- * somewhere else.
- *
- * ARMADA 610 register manual, sec 7.2.1, p1842.
- */
-#define CPU_SUBSYS_PMU_BASE	0xd4282800
-#define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
-#define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
-
-static void mcam_clk_enable(struct mcam_camera *mcam)
-{
-	unsigned int i;
-
-	for (i = 0; i < NR_MCAM_CLK; i++) {
-		if (!IS_ERR(mcam->clk[i]))
-			clk_prepare_enable(mcam->clk[i]);
-	}
-}
-
-static void mcam_clk_disable(struct mcam_camera *mcam)
-{
-	int i;
-
-	for (i = NR_MCAM_CLK - 1; i >= 0; i--) {
-		if (!IS_ERR(mcam->clk[i]))
-			clk_disable_unprepare(mcam->clk[i]);
-	}
-}
-
-/*
- * Power control.
- */
-static void mmpcam_power_up_ctlr(struct mmp_camera *cam)
-{
-	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
-	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
-	mdelay(1);
-}
-
-static int mmpcam_power_up(struct mcam_camera *mcam)
-{
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-	struct mmp_camera_platform_data *pdata;
-
-/*
- * Turn on power and clocks to the controller.
- */
-	mmpcam_power_up_ctlr(cam);
-	mcam_clk_enable(mcam);
-/*
- * Provide power to the sensor.
- */
-	mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
-	pdata = cam->pdev->dev.platform_data;
-	gpio_set_value(pdata->sensor_power_gpio, 1);
-	mdelay(5);
-	mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
-	gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
-	mdelay(5);
-	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
-	mdelay(5);
-
-	return 0;
-}
-
-static void mmpcam_power_down(struct mcam_camera *mcam)
-{
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-	struct mmp_camera_platform_data *pdata;
-/*
- * Turn off clocks and set reset lines
- */
-	iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
-	iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
-/*
- * Shut down the sensor.
- */
-	pdata = cam->pdev->dev.platform_data;
-	gpio_set_value(pdata->sensor_power_gpio, 0);
-	gpio_set_value(pdata->sensor_reset_gpio, 0);
-
-	mcam_clk_disable(mcam);
-}
-
 /*
  * calc the dphy register values
  * There are three dphy registers being used.
@@ -327,8 +236,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&cam->devlist);
 
 	mcam = &cam->mcam;
-	mcam->plat_power_up = mmpcam_power_up;
-	mcam->plat_power_down = mmpcam_power_down;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	pdata = pdev->dev.platform_data;
@@ -366,33 +273,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	if (IS_ERR(mcam->regs))
 		return PTR_ERR(mcam->regs);
 	mcam->regs_size = resource_size(res);
-	/*
-	 * Power/clock memory is elsewhere; get it too.  Perhaps this
-	 * should really be managed outside of this driver?
-	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	cam->power_regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(cam->power_regs))
-		return PTR_ERR(cam->power_regs);
-	/*
-	 * Sensor GPIO pins.
-	 */
-	ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio,
-							"cam-power");
-	if (ret) {
-		dev_err(&pdev->dev, "Can't get sensor power gpio %d",
-				pdata->sensor_power_gpio);
-		return ret;
-	}
-	gpio_direction_output(pdata->sensor_power_gpio, 0);
-	ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio,
-							"cam-reset");
-	if (ret) {
-		dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
-				pdata->sensor_reset_gpio);
-		return ret;
-	}
-	gpio_direction_output(pdata->sensor_reset_gpio, 0);
 
 	mcam_init_clk(mcam);
 
@@ -410,14 +290,21 @@ static int mmpcam_probe(struct platform_device *pdev)
 	fwnode_handle_put(ep);
 
 	/*
-	 * Power the device up and hand it off to the core.
+	 * Register the device with the core.
 	 */
-	ret = mmpcam_power_up(mcam);
-	if (ret)
-		return ret;
 	ret = mccic_register(mcam);
 	if (ret)
-		goto out_power_down;
+		return ret;
+
+	/*
+	 * Add OF clock provider.
+	 */
+	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+								mcam->mclk);
+	if (ret) {
+		dev_err(&pdev->dev, "can't add DT clock provider\n");
+		goto out;
+	}
 
 	/*
 	 * Finally, set up our IRQ now that the core is ready to
@@ -426,7 +313,7 @@ static int mmpcam_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res == NULL) {
 		ret = -ENODEV;
-		goto out_unregister;
+		goto out;
 	}
 	cam->irq = res->start;
 	ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
@@ -436,10 +323,10 @@ static int mmpcam_probe(struct platform_device *pdev)
 		return 0;
 	}
 
-out_unregister:
+out:
+	fwnode_handle_put(mcam->asd.match.fwnode);
 	mccic_shutdown(mcam);
-out_power_down:
-	mmpcam_power_down(mcam);
+
 	return ret;
 }
 
@@ -450,7 +337,6 @@ static int mmpcam_remove(struct mmp_camera *cam)
 
 	mmpcam_remove_device(cam);
 	mccic_shutdown(mcam);
-	mmpcam_power_down(mcam);
 	return 0;
 }
 
@@ -482,12 +368,6 @@ static int mmpcam_resume(struct platform_device *pdev)
 {
 	struct mmp_camera *cam = mmpcam_find_device(pdev);
 
-	/*
-	 * Power up unconditionally just in case the core tries to
-	 * touch a register even if nothing was active before; trust
-	 * me, it's better this way.
-	 */
-	mmpcam_power_up_ctlr(cam);
 	return mccic_resume(&cam->mcam);
 }
 
diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h
index c573ebc40035..53adaab64f28 100644
--- a/include/linux/platform_data/media/mmp-camera.h
+++ b/include/linux/platform_data/media/mmp-camera.h
@@ -12,8 +12,6 @@ enum dphy3_algo {
 };
 
 struct mmp_camera_platform_data {
-	int sensor_power_gpio;
-	int sensor_reset_gpio;
 	enum v4l2_mbus_type bus_type;
 	int mclk_src;	/* which clock source the MCLK derives from */
 	int mclk_div;	/* Clock Divider Value for MCLK */
-- 
2.19.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor
  2018-11-12  0:35 ` [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor Lubomir Rintel
@ 2018-11-12 22:06   ` kbuild test robot
  0 siblings, 0 replies; 15+ messages in thread
From: kbuild test robot @ 2018-11-12 22:06 UTC (permalink / raw)
  To: Lubomir Rintel
  Cc: kbuild-all, Mauro Carvalho Chehab, Jonathan Corbet, linux-media,
	Rob Herring, Mark Rutland, devicetree, linux-kernel,
	Lubomir Rintel, James Cameron, Pavel Machek, Libin Yang,
	Albert Wang

[-- Attachment #1: Type: text/plain, Size: 5427 bytes --]

Hi Lubomir,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on v4.20-rc1 next-20181112]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Lubomir-Rintel/media-make-Marvell-camera-work-on-DT-based-OLPC-XO-1-75/20181112-163212
base:   git://linuxtv.org/media_tree.git master
config: x86_64-randconfig-x003-11121005 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

Note: the linux-review/Lubomir-Rintel/media-make-Marvell-camera-work-on-DT-based-OLPC-XO-1-75/20181112-163212 HEAD e78fa6428e22bbc61543f031695ad6f204f32344 builds fine.
      It only hurts bisectibility.

All error/warnings (new ones prefixed by >>):

   drivers/media/platform/marvell-ccic/cafe-driver.c: In function 'cafe_pci_probe':
>> drivers/media/platform/marvell-ccic/cafe-driver.c:563:2: error: implicit declaration of function 'cafe_shutdown'; did you mean 'mccic_shutdown'? [-Werror=implicit-function-declaration]
     cafe_shutdown(cam);
     ^~~~~~~~~~~~~
     mccic_shutdown
   drivers/media/platform/marvell-ccic/cafe-driver.c: At top level:
>> drivers/media/platform/marvell-ccic/cafe-driver.c:583:13: warning: conflicting types for 'cafe_shutdown'
    static void cafe_shutdown(struct cafe_camera *cam)
                ^~~~~~~~~~~~~
>> drivers/media/platform/marvell-ccic/cafe-driver.c:583:13: error: static declaration of 'cafe_shutdown' follows non-static declaration
   drivers/media/platform/marvell-ccic/cafe-driver.c:563:2: note: previous implicit declaration of 'cafe_shutdown' was here
     cafe_shutdown(cam);
     ^~~~~~~~~~~~~
   cc1: some warnings being treated as errors

vim +563 drivers/media/platform/marvell-ccic/cafe-driver.c

   481	
   482	/* -------------------------------------------------------------------------- */
   483	/*
   484	 * PCI interface stuff.
   485	 */
   486	
   487	static int cafe_pci_probe(struct pci_dev *pdev,
   488			const struct pci_device_id *id)
   489	{
   490		int ret;
   491		struct cafe_camera *cam;
   492		struct mcam_camera *mcam;
   493	
   494		/*
   495		 * Start putting together one of our big camera structures.
   496		 */
   497		ret = -ENOMEM;
   498		cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
   499		if (cam == NULL)
   500			goto out;
   501		cam->pdev = pdev;
   502		mcam = &cam->mcam;
   503		mcam->chip_id = MCAM_CAFE;
   504		spin_lock_init(&mcam->dev_lock);
   505		init_waitqueue_head(&cam->smbus_wait);
   506		mcam->plat_power_up = cafe_ctlr_power_up;
   507		mcam->plat_power_down = cafe_ctlr_power_down;
   508		mcam->dev = &pdev->dev;
   509		snprintf(mcam->bus_info, sizeof(mcam->bus_info), "PCI:%s", pci_name(pdev));
   510		/*
   511		 * Vmalloc mode for buffers is traditional with this driver.
   512		 * We *might* be able to run DMA_contig, especially on a system
   513		 * with CMA in it.
   514		 */
   515		mcam->buffer_mode = B_vmalloc;
   516		/*
   517		 * Get set up on the PCI bus.
   518		 */
   519		ret = pci_enable_device(pdev);
   520		if (ret)
   521			goto out_free;
   522		pci_set_master(pdev);
   523	
   524		ret = -EIO;
   525		mcam->regs = pci_iomap(pdev, 0, 0);
   526		if (!mcam->regs) {
   527			printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
   528			goto out_disable;
   529		}
   530		mcam->regs_size = pci_resource_len(pdev, 0);
   531		ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
   532		if (ret)
   533			goto out_iounmap;
   534	
   535		/*
   536		 * Initialize the controller and leave it powered up.  It will
   537		 * stay that way until the sensor driver shows up.
   538		 */
   539		cafe_ctlr_init(mcam);
   540		cafe_ctlr_power_up(mcam);
   541		/*
   542		 * Set up I2C/SMBUS communications.  We have to drop the mutex here
   543		 * because the sensor could attach in this call chain, leading to
   544		 * unsightly deadlocks.
   545		 */
   546		ret = cafe_smbus_setup(cam);
   547		if (ret)
   548			goto out_pdown;
   549	
   550		mcam->asd.match_type = V4L2_ASYNC_MATCH_I2C;
   551		mcam->asd.match.i2c.adapter_id = i2c_adapter_id(cam->i2c_adapter);
   552		mcam->asd.match.i2c.address = ov7670_info.addr;
   553	
   554		ret = mccic_register(mcam);
   555		if (ret)
   556			goto out_smbus_shutdown;
   557	
   558		if (i2c_new_device(cam->i2c_adapter, &ov7670_info)) {
   559			cam->registered = 1;
   560			return 0;
   561		}
   562	
 > 563		cafe_shutdown(cam);
   564	out_smbus_shutdown:
   565		cafe_smbus_shutdown(cam);
   566	out_pdown:
   567		cafe_ctlr_power_down(mcam);
   568		free_irq(pdev->irq, cam);
   569	out_iounmap:
   570		pci_iounmap(pdev, mcam->regs);
   571	out_disable:
   572		pci_disable_device(pdev);
   573	out_free:
   574		kfree(cam);
   575	out:
   576		return ret;
   577	}
   578	
   579	
   580	/*
   581	 * Shut down an initialized device
   582	 */
 > 583	static void cafe_shutdown(struct cafe_camera *cam)
   584	{
   585		mccic_shutdown(&cam->mcam);
   586		cafe_smbus_shutdown(cam);
   587		free_irq(cam->pdev->irq, cam);
   588		pci_iounmap(cam->pdev, cam->mcam.regs);
   589	}
   590	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33182 bytes --]

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v2 02/11] media: ov7670: control clock along with power
  2018-11-12  0:35 ` [PATCH v2 02/11] media: ov7670: control clock along with power Lubomir Rintel
@ 2018-11-14 14:35   ` Hans Verkuil
  0 siblings, 0 replies; 15+ messages in thread
From: Hans Verkuil @ 2018-11-14 14:35 UTC (permalink / raw)
  To: Lubomir Rintel, Mauro Carvalho Chehab, Jonathan Corbet, linux-media
  Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel,
	James Cameron, Pavel Machek, Libin Yang, Albert Wang

On 11/12/18 01:35, Lubomir Rintel wrote:
> This provides more power saving when the sensor is off.
> 
> While at that, do the delay on power/clock enable even if the sensor driver
> itself doesn't control the GPIOs. This is required for the OLPC XO-1
> platform, that lacks the proper power/reset properties in its DT, but
> needs the delay after the sensor is clocked up.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  drivers/media/i2c/ov7670.c | 37 +++++++++++++++++++++----------------
>  1 file changed, 21 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index d87f2362bf40..a3e72c62382c 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -241,6 +241,7 @@ struct ov7670_info {
>  	struct v4l2_mbus_framefmt format;
>  	struct ov7670_format_struct *fmt;  /* Current format */
>  	struct clk *clk;
> +	int on;
>  	struct gpio_desc *resetb_gpio;
>  	struct gpio_desc *pwdn_gpio;
>  	unsigned int mbus_config;	/* Media bus configuration flags */
> @@ -1610,15 +1611,26 @@ static int ov7670_s_power(struct v4l2_subdev *sd, int on)
>  {
>  	struct ov7670_info *info = to_state(sd);
>  
> +	if (info->on == on)
> +		return 0;
> +
> +	if (on)
> +		clk_prepare_enable(info->clk);
> +	else
> +		clk_disable_unprepare(info->clk);
> +
>  	if (info->pwdn_gpio)
>  		gpiod_set_value(info->pwdn_gpio, !on);
>  	if (on && info->resetb_gpio) {
>  		gpiod_set_value(info->resetb_gpio, 1);
>  		usleep_range(500, 1000);
>  		gpiod_set_value(info->resetb_gpio, 0);
> -		usleep_range(3000, 5000);
>  	}
>  
> +	if (on && (info->pwdn_gpio || info->resetb_gpio || info->clk))
> +		usleep_range(3000, 5000);
> +
> +	info->on = on;

I assume that when powered off all control settings (brightness etc) are
lost. That means that when it is powered on you should call
v4l2_ctrl_handler_setup() to re-init the control-related registers.

The same might be the case with ov7670_set_fmt and the framerate functions.

Basically the state has to be preserved across power on -> off -> on
transitions.

Regards,

	Hans

>  	return 0;
>  }
>  
> @@ -1817,24 +1829,20 @@ static int ov7670_probe(struct i2c_client *client,
>  		else
>  			return ret;
>  	}
> -	if (info->clk) {
> -		ret = clk_prepare_enable(info->clk);
> -		if (ret)
> -			return ret;
> +	ret = ov7670_init_gpio(client, info);
> +	if (ret)
> +		return ret;
> +
> +	ov7670_s_power(sd, 1);
>  
> +	if (info->clk) {
>  		info->clock_speed = clk_get_rate(info->clk) / 1000000;
>  		if (info->clock_speed < 10 || info->clock_speed > 48) {
>  			ret = -EINVAL;
> -			goto clk_disable;
> +			goto power_off;
>  		}
>  	}
>  
> -	ret = ov7670_init_gpio(client, info);
> -	if (ret)
> -		goto clk_disable;
> -
> -	ov7670_s_power(sd, 1);
> -
>  	/* Make sure it's an ov7670 */
>  	ret = ov7670_detect(sd);
>  	if (ret) {
> @@ -1913,6 +1921,7 @@ static int ov7670_probe(struct i2c_client *client,
>  	if (ret < 0)
>  		goto entity_cleanup;
>  
> +	ov7670_s_power(sd, 0);
>  	return 0;
>  
>  entity_cleanup:
> @@ -1921,12 +1930,9 @@ static int ov7670_probe(struct i2c_client *client,
>  	v4l2_ctrl_handler_free(&info->hdl);
>  power_off:
>  	ov7670_s_power(sd, 0);
> -clk_disable:
> -	clk_disable_unprepare(info->clk);
>  	return ret;
>  }
>  
> -
>  static int ov7670_remove(struct i2c_client *client)
>  {
>  	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> @@ -1934,7 +1940,6 @@ static int ov7670_remove(struct i2c_client *client)
>  
>  	v4l2_async_unregister_subdev(sd);
>  	v4l2_ctrl_handler_free(&info->hdl);
> -	clk_disable_unprepare(info->clk);
>  	media_entity_cleanup(&info->sd.entity);
>  	ov7670_s_power(sd, 0);
>  	return 0;
> 


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera
  2018-11-12  0:35 ` [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera Lubomir Rintel
@ 2018-11-17 15:39   ` Rob Herring
  0 siblings, 0 replies; 15+ messages in thread
From: Rob Herring @ 2018-11-17 15:39 UTC (permalink / raw)
  To: Lubomir Rintel
  Cc: Mauro Carvalho Chehab, Jonathan Corbet, linux-media,
	Mark Rutland, devicetree, linux-kernel, James Cameron,
	Pavel Machek, Libin Yang, Albert Wang

On Mon, Nov 12, 2018 at 01:35:12AM +0100, Lubomir Rintel wrote:
> Add Marvell MMP2 camera host interface.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  .../bindings/media/marvell,mmp2-ccic.txt      | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> new file mode 100644
> index 000000000000..a9c536e58dda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt
> @@ -0,0 +1,30 @@
> +Marvell MMP2 camera host interface
> +
> +Required properties:
> + - compatible: Should be "marvell,mmp2-ccic"
> + - reg: register base and size
> + - interrupts: the interrupt number
> + - any required generic properties defined in video-interfaces.txt
> +
> +Optional properties:
> + - clocks: input clock (see clock-bindings.txt)
> + - clock-output-names: should contain the name of the clock driving the
> +                       sensor master clock MCLK

Missing #clock-cells and clock-names.

How many ports and endpoints also needs to be documented.

> +
> +Example:
> +
> +	camera0: camera@d420a000 {
> +		compatible = "marvell,mmp2-ccic";
> +		reg = <0xd420a000 0x800>;
> +		interrupts = <42>;
> +		clocks = <&soc_clocks MMP2_CLK_CCIC0>;
> +		clock-names = "CCICAXICLK";
> +		#clock-cells = <0>;
> +		clock-output-names = "mclk";
> +
> +		port {
> +			camera0_0: endpoint {
> +				remote-endpoint = <&ov7670_0>;
> +			};
> +		};
> +	};
> -- 
> 2.19.1
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2018-11-17 15:39 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-12  0:35 [PATCH v2 0/11] media: make Marvell camera work on DT-based OLPC XO-1.75 Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 01/11] media: ov7670: hook s_power onto v4l2 core Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 02/11] media: ov7670: control clock along with power Lubomir Rintel
2018-11-14 14:35   ` Hans Verkuil
2018-11-12  0:35 ` [PATCH v2 03/11] media: dt-bindings: marvell,mmp2-ccic: Add Marvell MMP2 camera Lubomir Rintel
2018-11-17 15:39   ` Rob Herring
2018-11-12  0:35 ` [PATCH v2 04/11] [media] marvell-ccic: fix DMA s/g desc number calculation Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 05/11] [media] marvell-ccic: don't generate EOF on parallel bus Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 06/11] Revert "[media] marvell-ccic: reset ccic phy when stop streaming for stability" Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 07/11] [media] marvell-ccic: drop unused stuff Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 08/11] [media] marvell-ccic/mmp: enable clock before accessing registers Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 09/11] [media] marvell-ccic/mmp: add devicetree support Lubomir Rintel
2018-11-12  0:35 ` [PATCH v2 10/11] [media] marvell-ccic: use async notifier to get the sensor Lubomir Rintel
2018-11-12 22:06   ` kbuild test robot
2018-11-12  0:35 ` [PATCH v2 11/11] [media] marvell-ccic: provide a clock for " Lubomir Rintel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).