[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.0-rc3+ (peda@orc) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot 2021.08) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #65 Wed Mar 2 16:33:37 CET 2022 [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Axentia ME20 1.0 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000020000000-0x0000000023ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000020000000-0x0000000023ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,115200 rw oops=panic panic=30 ip=none root=ubi0:rootfs ubi.mtd=6 rootfstype=ubifs noinitrd mtdparts=atmel_nand:256k(at91bootstrap),384k(barebox),256k@768k(bareboxenv),256k(bareboxenv2),128k@1536k(oftree),5M@2M(kernel),248M@8M(rootfs),-@256M(ovlfs) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 54036K/65536K available (7168K kernel code, 336K rwdata, 1280K rodata, 1024K init, 105K bss, 11500K reserved, 0K cma-reserved) [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x288/0x3b8 with crng_init=0 [ 0.000000] clocksource: timer@f0010000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115833966437 ns [ 0.000028] sched_clock: 32 bits at 16MHz, resolution 60ns, wraps every 130150523873ns [ 0.000066] Switching to timer-based delay loop, resolution 60ns [ 0.064143] clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14479245754 ns [ 0.064900] Console: colour dummy device 80x30 [ 0.064981] Calibrating delay loop (skipped), value calculated using timer frequency.. 33.00 BogoMIPS (lpj=165000) [ 0.065032] pid_max: default: 32768 minimum: 301 [ 0.065342] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.065395] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.066572] CPU: Testing write buffer coherency: ok [ 0.067881] Setting up static identity map for 0x20100000 - 0x20100060 [ 0.069481] devtmpfs: initialized [ 0.087396] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 [ 0.088032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.088098] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.088292] pinctrl core: initialized pinctrl subsystem [ 0.090363] NET: Registered protocol family 16 [ 0.091498] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.131639] AT91: PM: standby: standby, suspend: ulp0 [ 0.131689] No ATAGs? [ 0.133101] gpio-at91 fffff200.gpio: at address (ptrval) [ 0.134559] gpio-at91 fffff400.gpio: at address (ptrval) [ 0.136118] gpio-at91 fffff600.gpio: at address (ptrval) [ 0.137794] gpio-at91 fffff800.gpio: at address (ptrval) [ 0.139548] gpio-at91 fffffa00.gpio: at address (ptrval) [ 0.141556] pinctrl-at91 ahb:apb:pinctrl@fffff200: initialized AT91 pinctrl driver [ 0.161208] at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8 channels [ 0.163591] at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8 channels [ 0.166563] AT91: Detected SoC family: sama5d3 [ 0.166604] AT91: Detected SoC: sama5d31, revision 2 [ 0.169066] SCSI subsystem initialized [ 0.169697] usbcore: registered new interface driver usbfs [ 0.169858] usbcore: registered new interface driver hub [ 0.170116] usbcore: registered new device driver usb [ 0.171359] at91_i2c f0014000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers [ 0.171919] i2c i2c-0: Not using recovery: no recover_bus() found [ 0.172383] at91_i2c f0014000.i2c: AT91 i2c bus driver (hw version: 0x402). [ 0.173759] at91_i2c f801c000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers [ 0.174316] i2c i2c-2: Not using recovery: no recover_bus() found [ 0.176517] pca953x 2-0038: supply vcc not found, using dummy regulator [ 0.177002] pca953x 2-0038: using no AI [ 0.179527] pca953x 2-0039: supply vcc not found, using dummy regulator [ 0.179968] pca953x 2-0039: using no AI [ 0.183828] at91_i2c f801c000.i2c: AT91 i2c bus driver (hw version: 0x402). [ 0.185716] Advanced Linux Sound Architecture Driver Initialized. [ 0.187582] clocksource: Switched to clocksource timer@f0010000 [ 0.214089] NET: Registered protocol family 2 [ 0.215420] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.215495] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.215550] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.215598] TCP: Hash tables configured (established 1024 bind 1024) [ 0.215866] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.215937] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.216304] NET: Registered protocol family 1 [ 0.218398] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.219442] io scheduler mq-deadline registered [ 0.219491] io scheduler kyber registered [ 0.232691] brd: module loaded [ 0.253479] loop: module loaded [ 0.254262] at24 0-0051: supply vcc not found, using dummy regulator [ 0.255672] at24 0-0051: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 0.256292] at24 2-0050: supply vcc not found, using dummy regulator [ 0.257759] at24 2-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 0.258668] atmel_usart_serial: Failed to locate of_node [id: -2] [ 0.259328] atmel_usart_serial.0.auto: ttyS1 at MMIO 0xf001c000 (irq = 20, base_baud = 4125000) is a ATMEL_SERIAL [ 0.261597] atmel_usart_serial: Failed to locate of_node [id: -2] [ 0.262198] atmel_usart_serial.1.auto: ttyS2 at MMIO 0xf0020000 (irq = 21, base_baud = 4125000) is a ATMEL_SERIAL [ 0.264248] atmel_usart_serial: Failed to locate of_node [id: -2] [ 0.264825] atmel_usart_serial.2.auto: ttyS0 at MMIO 0xffffee00 (irq = 30, base_baud = 8250000) is a ATMEL_SERIAL [ 0.888475] printk: console [ttyS0] enabled [ 0.897801] libphy: Fixed MDIO Bus: probed [ 0.904936] macb f802c000.ethernet: invalid hw address, using random [ 0.912773] libphy: MACB_mii_bus: probed [ 0.951592] macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 38 (da:cc:3e:24:ad:a2) [ 0.962277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.968841] ehci-atmel: EHCI Atmel driver [ 0.977104] atmel-ehci 700000.ehci: EHCI Host Controller [ 0.982537] atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 [ 0.990358] atmel-ehci 700000.ehci: irq 40, io mem 0x00700000 [ 1.020063] atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 [ 1.026421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.034749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.041987] usb usb1: Product: EHCI Host Controller [ 1.046843] usb usb1: Manufacturer: Linux 5.10.0-rc3+ ehci_hcd [ 1.052716] usb usb1: SerialNumber: 700000.ehci [ 1.058752] hub 1-0:1.0: USB hub found [ 1.062735] hub 1-0:1.0: 3 ports detected [ 1.068424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.074708] ohci-atmel: OHCI Atmel driver [ 1.080595] at91_ohci 600000.ohci: USB Host Controller [ 1.085802] at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 [ 1.093467] at91_ohci 600000.ohci: irq 40, io mem 0x00600000 [ 1.164436] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.172776] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.179987] usb usb2: Product: USB Host Controller [ 1.184818] usb usb2: Manufacturer: Linux 5.10.0-rc3+ ohci_hcd [ 1.190659] usb usb2: SerialNumber: at91 [ 1.196357] hub 2-0:1.0: USB hub found [ 1.200420] hub 2-0:1.0: 2 ports detected [ 1.206887] usbcore: registered new interface driver uas [ 1.212449] usbcore: registered new interface driver usb-storage [ 1.218529] usbcore: registered new interface driver ums-alauda [ 1.224563] usbcore: registered new interface driver ums-cypress [ 1.230688] usbcore: registered new interface driver ums-datafab [ 1.236764] usbcore: registered new interface driver ums_eneub6250 [ 1.243051] usbcore: registered new interface driver ums-freecom [ 1.249126] usbcore: registered new interface driver ums-isd200 [ 1.255157] usbcore: registered new interface driver ums-jumpshot [ 1.261358] usbcore: registered new interface driver ums-karma [ 1.267262] usbcore: registered new interface driver ums-onetouch [ 1.273470] usbcore: registered new interface driver ums-realtek [ 1.279568] usbcore: registered new interface driver ums-sddr09 [ 1.285600] usbcore: registered new interface driver ums-sddr55 [ 1.291634] usbcore: registered new interface driver ums-usbat [ 1.297718] usbcore: registered new interface driver ftdi_sio [ 1.303598] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.311990] atmel_usba_udc 500000.gadget: MMIO registers at [mem 0xf8030000-0xf8033fff] mapped at (ptrval) [ 1.321837] atmel_usba_udc 500000.gadget: FIFO at [mem 0x00500000-0x005fffff] mapped at (ptrval) [ 1.334189] g_serial gadget: Gadget Serial v2.4 [ 1.338709] g_serial gadget: g_serial ready [ 1.345530] at91_rtc fffffeb0.rtc: registered as rtc0 [ 1.350683] at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01T02:26:23 UTC (1167618383) [ 1.359411] at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. [ 1.365635] i2c /dev entries driver [ 1.371400] at91-reset fffffe00.rstc: Starting after user reset [ 1.378397] lm75 2-004a: supply vs not found, using dummy regulator [ 1.386116] lm75 2-004a: hwmon0: sensor 'at30ts74' [ 1.392489] at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0) [ 1.399385] atmel_aes f8038000.aes: version: 0x135 [ 1.406967] atmel_aes f8038000.aes: Atmel AES - Using dma1chan2, dma1chan3 for DMA transfers [ 1.416412] atmel_sha f8034000.sha: version: 0x410 [ 1.421501] atmel_sha f8034000.sha: using dma1chan4 for DMA transfers [ 1.429768] atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512 [ 1.437640] atmel_tdes f803c000.tdes: version: 0x701 [ 1.443072] atmel_tdes f803c000.tdes: using dma1chan5, dma1chan6 for DMA transfers [ 1.453314] atmel_tdes f803c000.tdes: Atmel DES/TDES [ 1.459147] usbcore: registered new interface driver usbhid [ 1.464762] usbhid: USB HID core driver [ 1.473121] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac [ 1.479468] nand: Micron MT29F4G08ABBDAHC [ 1.483557] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.492011] usb 1-2: new high-speed USB device number 2 using atmel-ehci [ 1.499339] Bad block table found at page 262080, version 0x01 [ 1.505707] Bad block table found at page 262016, version 0x01 [ 1.511975] 8 cmdlinepart partitions found on MTD device atmel_nand [ 1.518226] Creating 8 MTD partitions on "atmel_nand": [ 1.523440] 0x000000000000-0x000000040000 : "at91bootstrap" [ 1.532455] 0x000000040000-0x0000000a0000 : "barebox" [ 1.541055] 0x0000000c0000-0x000000100000 : "bareboxenv" [ 1.549748] 0x000000100000-0x000000140000 : "bareboxenv2" [ 1.558604] 0x000000180000-0x0000001a0000 : "oftree" [ 1.567271] 0x000000200000-0x000000700000 : "kernel" [ 1.576183] 0x000000800000-0x000010000000 : "rootfs" [ 1.586451] 0x000010000000-0x000020000000 : "ovlfs" [ 1.607590] xt_time: kernel timezone is -0000 [ 1.612412] gre: GRE over IPv4 demultiplexor driver [ 1.617662] Initializing XFRM netlink socket [ 1.622226] NET: Registered protocol family 10 [ 1.628589] Segment Routing with IPv6 [ 1.632861] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.640410] NET: Registered protocol family 17 [ 1.660691] ubi0: attaching mtd6 [ 1.664091] random: fast init done [ 1.691575] usb 1-2: New USB device found, idVendor=0403, idProduct=6011, bcdDevice= 8.00 [ 1.699766] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.706991] usb 1-2: Product: Quad RS232-HS [ 1.711201] usb 1-2: Manufacturer: FTDI [ 1.717343] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected [ 1.724413] usb 1-2: Detected FT4232H [ 1.729268] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 1.737880] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected [ 1.744956] usb 1-2: Detected FT4232H [ 1.749712] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1 [ 1.758271] ftdi_sio 1-2:1.2: FTDI USB Serial Device converter detected [ 1.765348] usb 1-2: Detected FT4232H [ 1.770134] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB2 [ 1.778663] ftdi_sio 1-2:1.3: FTDI USB Serial Device converter detected [ 1.785720] usb 1-2: Detected FT4232H [ 1.790602] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB3 [ 2.863734] ubi0: scanning is finished [ 2.878739] ubi0: attached mtd6 (name "rootfs", size 248 MiB) [ 2.884544] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.891432] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.898209] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.905245] ubi0: good PEBs: 1984, bad PEBs: 0, corrupted PEBs: 0 [ 2.911348] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.918566] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1631681466 [ 2.927754] ubi0: available PEBs: 0, total reserved PEBs: 1984, PEBs reserved for bad PEB handling: 80 [ 2.937532] ubi0: background thread "ubi_bgt0d" started, PID 63 [ 2.948405] input: keys as /devices/platform/keys/input/input0 [ 2.956048] ALSA device list: [ 2.958985] No soundcards found. [ 2.964228] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 2.970305] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 64 [ 3.052921] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 3.060411] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 3.070371] UBIFS (ubi0:0): FS size: 239857664 bytes (228 MiB, 1889 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 3.081093] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 3.086922] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 67B154A3-BF3E-4742-918A-569AB897CAFD, small LPT model [ 3.099888] VFS: Mounted root (ubifs filesystem) on device 0:13. [ 3.107321] devtmpfs: mounted [ 3.113200] Freeing unused kernel memory: 1024K [ 3.117921] Run /sbin/init as init process [ 3.122033] with arguments: [ 3.124956] /sbin/init [ 3.127659] noinitrd [ 3.130214] with environment: [ 3.133333] HOME=/ [ 3.135688] TERM=linux [ 3.161134] random: crng init done [ 3.818451] ubi1: attaching mtd7 [ 4.953973] ubi1: scanning is finished [ 4.969163] ubi1: attached mtd7 (name "ovlfs", size 256 MiB) [ 4.974881] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.981769] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.988549] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.995554] ubi1: good PEBs: 2044, bad PEBs: 4, corrupted PEBs: 0 [ 5.001662] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.008886] ubi1: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1283539683 [ 5.018071] ubi1: available PEBs: 0, total reserved PEBs: 2044, PEBs reserved for bad PEB handling: 76 [ 5.027815] ubi1: background thread "ubi_bgt1d" started, PID 79 UBI device number 1, total 2044 LEBs (259538944 bytes, 247.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) ubimkvol: error!: UBI device does not have free logical eraseblocks [ 5.143406] UBIFS (ubi1:0): Mounting in unauthenticated mode [ 5.149436] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 85 [ 5.184097] UBIFS (ubi1:0): recovery needed [ 5.289691] UBIFS (ubi1:0): recovery completed [ 5.294361] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ovl" [ 5.301564] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 5.311518] UBIFS (ubi1:0): FS size: 247730176 bytes (236 MiB, 1951 LEBs), journal size 12443648 bytes (11 MiB, 98 LEBs) [ 5.322421] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.329036] UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID AF203193-3C1C-433E-95D2-2F69D45F490A, small LPT model [ 6.502071] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops