linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: bhelgaas@google.com, matthew.garrett@nebula.com,
	rafael.j.wysocki@intel.com, dmitry.torokhov@gmail.com,
	mika.westerberg@linux.intel.com, Zhang Rui <rui.zhang@intel.com>
Subject: [PATCH V7 06/11] ACPI: always register container scan handler even if CONFIG_ACPI_CONTAINER is cleared
Date: Fri, 23 May 2014 02:02:28 +0800	[thread overview]
Message-ID: <1400781753-2682-7-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1400781753-2682-1-git-send-email-rui.zhang@intel.com>

The new ACPI device enumeration mechanism, which will be introduced
in a later patch, will enumerate the _HID devices w/o any scan
handler attached to platform bus.
This means that, for the devices that are attached to a configurable
scan handler, we should make sure no platform devices would be
created for them even if the scan handler is compiled out.

Fix this problem for container devices by always registering the
container scan handler, but with meaningful callbacks
only when CONFIG_ACPI_CONTAINER is set.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/acpi/Makefile    |  2 +-
 drivers/acpi/container.c | 18 ++++++++++++------
 drivers/acpi/internal.h  |  4 ----
 3 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 9a43893..5611a07 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -63,7 +63,7 @@ obj-$(CONFIG_ACPI_FAN)		+= fan.o
 obj-$(CONFIG_ACPI_VIDEO)	+= video.o
 obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
-obj-$(CONFIG_ACPI_CONTAINER)	+= container.o
+obj-y				+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
 obj-$(CONFIG_ACPI_BATTERY)	+= battery.o
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 63119d0..b78f52e 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -41,6 +41,8 @@ static const struct acpi_device_id container_device_ids[] = {
 	{"", 0},
 };
 
+#ifdef CONFIG_ACPI_CONTAINER
+
 static int acpi_container_offline(struct container_dev *cdev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&cdev->dev);
@@ -97,17 +99,21 @@ static void container_device_detach(struct acpi_device *adev)
 		device_unregister(dev);
 }
 
+#endif /* CONFIG_ACPI_CONTAINER */
+
 static struct acpi_scan_handler container_handler = {
 	.ids = container_device_ids,
-	.attach = container_device_attach,
-	.detach = container_device_detach,
-	.hotplug = {
-		.enabled = true,
-		.demand_offline = true,
-	},
 };
 
 void __init acpi_container_init(void)
 {
+#ifdef CONFIG_ACPI_CONTAINER
+	container_handler.attach = container_device_attach;
+	container_handler.detach = container_device_detach;
+	container_handler.hotplug.enabled = true;
+	container_handler.hotplug.demand_offline = true;
 	acpi_scan_add_handler_with_hotplug(&container_handler, "container");
+#else
+	acpi_scan_add_handler(&container_handler);
+#endif /* CONFIG_ACPI_CONTAINER */
 }
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 3a12866..499908e 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -32,11 +32,7 @@ void acpi_processor_init(void);
 void acpi_platform_init(void);
 void acpi_pnp_init(void);
 int acpi_sysfs_init(void);
-#ifdef CONFIG_ACPI_CONTAINER
 void acpi_container_init(void);
-#else
-static inline void acpi_container_init(void) {}
-#endif
 #ifdef CONFIG_ACPI_DOCK
 void register_dock_dependent_device(struct acpi_device *adev,
 				    acpi_handle dshandle);
-- 
1.8.3.2


  parent reply	other threads:[~2014-05-22 18:03 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-22 18:02 [PATCH V7 00/11] ACPI: ACPI enumeration rework Zhang Rui
2014-05-22 18:02 ` [PATCH V7 01/11] ACPI: introduce .match() callback for ACPI scan handler Zhang Rui
2014-05-22 18:02 ` [PATCH V7 02/11] PNPACPI: use whilte list for pnpacpi device enumeration Zhang Rui
2014-05-22 18:14   ` Bjorn Helgaas
2014-05-23  0:00     ` Zhang Rui
2014-05-22 18:02 ` [PATCH V7 03/11] ACPI: remove ids that does not comply with the ACPI PNP id rule Zhang Rui
2014-05-22 18:02 ` [PATCH V7 04/11] ACPI: remove unsupported serial PNP ids from acpi pnp scan handler id lsit Zhang Rui
2014-05-22 18:02 ` [PATCH V7 05/11] ACPI: allow scan handlers without .attach() callback Zhang Rui
2014-05-22 18:02 ` Zhang Rui [this message]
2014-05-22 18:02 ` [PATCH V7 07/11] ACPI: always register memory hotplug scan handler even if CONFIG_ACPI_HOTPLUG_MEMORY is cleared Zhang Rui
2014-05-22 18:02 ` [PATCH V7 08/11] ACPI: always register memory hotplug scan handler even if CONFIG_X86_INTEL_LPSS " Zhang Rui
2014-05-26 10:56   ` Mika Westerberg
2014-05-26 11:53     ` Rafael J. Wysocki
2014-05-26 11:52       ` Mika Westerberg
2014-05-26 12:40         ` Rafael J. Wysocki
2014-05-26 12:58           ` Mika Westerberg
2014-05-22 18:02 ` [PATCH V7 09/11] ACPI: introduce platform_id flag Zhang Rui
2014-05-22 18:02 ` [PATCH V7 10/11] ACPI: use platform bus as the default bus for _HID enumeration Zhang Rui
2014-05-26 10:21   ` Mika Westerberg
2014-05-28  7:16     ` Zhang Rui
2014-05-22 18:02 ` [PATCH V7 11/11] ACPI: introduce acpi platform exclude id list Zhang Rui
2014-05-30  2:20 ` [PATCH 0/10] ACPI enumeration rework (was: Re: [PATCH V7 00/11] ACPI: ACPI enumeration rework) Rafael J. Wysocki
2014-05-30  2:21   ` [PATCH 1/10] ACPI / scan: .match() callback for ACPI scan handlers Rafael J. Wysocki
2014-05-30  2:23   ` [PATCH 2/10] ACPI / PNP: use device ID list for PNPACPI device enumeration Rafael J. Wysocki
2014-05-30  2:24   ` [PATCH 3/10] ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule Rafael J. Wysocki
2014-05-30  2:25   ` [PATCH 4/10] ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list Rafael J. Wysocki
2014-05-30  2:26   ` [PATCH 5/10] ACPI / scan: introduce platform_id device PNP type flag Rafael J. Wysocki
2014-05-30  2:27   ` [PATCH 6/10] ACPI / scan: Change the meaning of missing .attach() in scan handlers Rafael J. Wysocki
2014-05-30  2:28   ` [PATCH 7/10] ACPI / scan: always register container scan handler Rafael J. Wysocki
2014-05-30  2:29   ` [PATCH 8/10] ACPI / scan: always register memory hotplug " Rafael J. Wysocki
2014-05-30  2:30   ` [PATCH 9/10] ACPI / scan: always register ACPI LPSS " Rafael J. Wysocki
2014-05-30 12:34     ` [Update][PATCH " Rafael J. Wysocki
2014-05-30  2:30   ` [PATCH 10/10] ACPI / scan: use platform bus type by default for _HID enumeration Rafael J. Wysocki
2014-05-30 12:35     ` [Update][PATCH " Rafael J. Wysocki
2014-05-31  5:56       ` Zhang Rui
2014-05-31  6:29         ` Zhang Rui
2014-05-30  8:33   ` [PATCH 0/10] ACPI enumeration rework (was: Re: [PATCH V7 00/11] ACPI: ACPI enumeration rework) Mika Westerberg
2014-05-30 12:17     ` Rafael J. Wysocki
2014-05-31 14:46   ` Zhang Rui
2014-05-31 22:29     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400781753-2682-7-git-send-email-rui.zhang@intel.com \
    --to=rui.zhang@intel.com \
    --cc=bhelgaas@google.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthew.garrett@nebula.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --subject='Re: [PATCH V7 06/11] ACPI: always register container scan handler even if CONFIG_ACPI_CONTAINER is cleared' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).