linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>, <dwmw2@infradead.org>, <computersforpeace@gmail.com>
Cc: <kyungmin.park@samsung.com>, <pekon@ti.com>,
	<ezequiel.garcia@free-electrons.com>, <javier@dowhile0.org>,
	<nsekhar@ti.com>, <linux-omap@vger.kernel.org>,
	<linux-mtd@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH 29/36] ARM: OMAP2+: gpmc-smc91x: Use gpmc_generic_init()
Date: Wed, 11 Jun 2014 11:56:34 +0300	[thread overview]
Message-ID: <1402477001-31132-30-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1402477001-31132-1-git-send-email-rogerq@ti.com>

Don't access any GPMC registers here. Use gpmc_generic_init()
to pass GPMC Chip Select settings, platform device and platform data
to the GPMC driver.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/mach-omap2/gpmc-smc91x.c | 50 +++++++++++++++------------------------
 1 file changed, 19 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 7f5d84a..4ac0d4d 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -25,8 +25,11 @@
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
 static struct resource gpmc_smc91x_resources[] = {
+/* GPMC driver will fixup the 1st memory resource, see gpmc_probe_legacy () */
 	[0] = {
 		.flags		= IORESOURCE_MEM,
+		.start		= 0,
+		.end		= 0xf,
 	},
 	[1] = {
 		.flags		= IORESOURCE_IRQ,
@@ -92,21 +95,11 @@ static void smc91c96_get_device_timing(struct gpmc_device_timings *dev_t)
  */
 void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
 {
-	unsigned long cs_mem_base;
 	int ret;
 	struct gpmc_device_timings dev_t;
 
 	gpmc_cfg = board_data;
 
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
-	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
 	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
 		smc91x_settings.mux_add_data = GPMC_MUX_AD;
 	if (gpmc_cfg->flags & GPMC_READ_MON)
@@ -115,34 +108,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
 		smc91x_settings.wait_on_write = true;
 	if (gpmc_cfg->wait_pin)
 		smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
-	ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
-	if (ret < 0)
-		goto free1;
-
-	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) {
-		struct gpmc_timings gpmc_t;
 
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
 		smc91c96_get_device_timing(&dev_t);
-		gpmc_calc_timings(&gpmc_t, &smc91x_settings, &dev_t);
-		if (gpmc_cs_set_timings(gpmc_cfg->cs, &gpmc_t)) {
-			pr_err("%s: failed to set GPMC timings\n", __func__);
-			goto free1;
-		}
-	}
 
 	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
 		goto free1;
 
 	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
 
-	if (gpmc_cfg->gpio_pwrdwn) {
+	if (gpio_is_valid(gpmc_cfg->gpio_pwrdwn)) {
 		ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
 				       GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
 		if (ret)
 			goto free2;
 	}
 
-	if (gpmc_cfg->gpio_reset) {
+	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
 		ret = gpio_request_one(gpmc_cfg->gpio_reset,
 				       GPIOF_OUT_INIT_LOW, "SMC91X reset");
 		if (ret)
@@ -153,21 +136,26 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
 		gpio_set_value(gpmc_cfg->gpio_reset, 0);
 	}
 
-	if (platform_device_register(&gpmc_smc91x_device) < 0) {
-		printk(KERN_ERR "Unable to register smc91x device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free3;
+	ret = gpmc_generic_init(gpmc_cfg->cs, false,
+				&smc91x_settings,
+				gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96 ?
+				&dev_t : NULL, NULL,
+				&gpmc_smc91x_device, sizeof(gpmc_smc91x_info));
+	if (ret) {
+		pr_err("%s: gpmc_generic_init() failed %d\n", __func__, ret);
+		goto free4;
 	}
 
 	return;
 
+free4:
+	if (gpio_is_valid(gpmc_cfg->gpio_reset))
+		gpio_free(gpmc_cfg->gpio_reset);
 free3:
-	if (gpmc_cfg->gpio_pwrdwn)
+	if (gpio_is_valid(gpmc_cfg->gpio_pwrdwn))
 		gpio_free(gpmc_cfg->gpio_pwrdwn);
 free2:
 	gpio_free(gpmc_cfg->gpio_irq);
 free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
 	printk(KERN_ERR "Could not initialize smc91x\n");
 }
-- 
1.8.3.2


  parent reply	other threads:[~2014-06-11  8:59 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-11  8:56 [PATCH 00/36] OMAP: GPMC: Restructure and move OMAP GPMC driver out of mach-omap2 Roger Quadros
2014-06-11  8:56 ` [PATCH 01/36] ARM: OMAP3: hwmod: Fix gpmc memory resource space Roger Quadros
2014-06-13  7:13   ` Tony Lindgren
2014-06-13  7:15     ` Roger Quadros
2014-06-11  8:56 ` [PATCH 02/36] ARM: dts: OMAP2+: Fix GPMC register space size Roger Quadros
2014-06-11  8:56 ` [PATCH 03/36] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2014-06-11  8:56 ` [PATCH 04/36] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2014-06-11  8:56 ` [PATCH 05/36] mtd: nand: omap: Move IRQ handling from GPMC to NAND driver Roger Quadros
2014-06-13  7:18   ` Tony Lindgren
2014-06-13  7:38     ` Roger Quadros
2014-06-13  7:58       ` Tony Lindgren
2014-06-13  8:13         ` Gupta, Pekon
2014-06-13  8:23           ` Roger Quadros
2014-06-13 10:46             ` Tony Lindgren
2014-06-13 11:42               ` Roger Quadros
2014-06-13 12:08                 ` Tony Lindgren
2014-07-01 10:11                   ` Roger Quadros
2014-07-01 13:16                     ` Tony Lindgren
2014-06-11  8:56 ` [PATCH 06/36] mtd: nand: omap: Move gpmc_update_nand_reg to nand driver Roger Quadros
2014-06-13  7:19   ` Tony Lindgren
2014-06-11  8:56 ` [PATCH 07/36] mtd: nand: omap: Move NAND write protect code from GPMC to NAND driver Roger Quadros
2014-06-13  7:20   ` Tony Lindgren
2014-06-11  8:56 ` [PATCH 08/36] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2014-06-11  8:56 ` [PATCH 09/36] mtd: nand: omap: Clean up device tree support Roger Quadros
2014-06-11  8:56 ` [PATCH 10/36] ARM: dts: OMAP2+: Fix NAND device nodes Roger Quadros
2014-06-13  7:21   ` Tony Lindgren
2014-06-11  8:56 ` [PATCH 11/36] mtd: nand: omap: Update DT binding documentation Roger Quadros
2014-06-11  8:56 ` [PATCH 12/36] ARM: dts: omap3-beagle: Add NAND device Roger Quadros
2014-06-11  8:56 ` [PATCH 13/36] ARM: OMAP2+: gpmc.c: sanity check bank-width DT property Roger Quadros
2014-06-11  8:56 ` [PATCH 14/36] ARM: OMAP2+: gpmc: Allow drivers to reconfigure GPMC settings & timings Roger Quadros
2014-06-13  7:25   ` Tony Lindgren
2014-06-13  7:44     ` Roger Quadros
2014-06-13  8:04       ` Tony Lindgren
2014-06-11  8:56 ` [PATCH 15/36] ARM: OMAP2+: gpmc: Allow drivers to query GPMC_CLK period Roger Quadros
2014-06-13  7:26   ` Tony Lindgren
2014-06-13  7:48     ` Roger Quadros
2014-06-11  8:56 ` [PATCH 16/36] mtd: onenand: omap: Remove regulator management code Roger Quadros
2014-06-11  8:56 ` [PATCH 17/36] ARM: OMAP2+: gpmc-onenand: Use Async settings/timings by default Roger Quadros
2014-06-11  8:56 ` [PATCH 18/36] ARM: OMAP2+: gpmc-onenand: Move Synchronous setting code to drivers/ Roger Quadros
2014-06-13  7:55   ` Tony Lindgren
2014-06-13  8:30     ` Roger Quadros
2014-06-11  8:56 ` [PATCH 19/36] mtd: onenand: omap: Use devres managed resources Roger Quadros
2014-06-11  8:56 ` [PATCH 20/36] mtd: onenand: omap: Clean up device tree support Roger Quadros
2014-06-11  8:56 ` [PATCH 21/36] ARM: dts: OMAP2+: Fix OneNAND device nodes Roger Quadros
2014-06-11  8:56 ` [PATCH 22/36] ARM: OMAP2+: gmpc: add gpmc_generic_init() Roger Quadros
2014-06-11  8:56 ` [PATCH 23/36] ARM: OMAP2+: gpmc: use platform data to configure CS space and poplulate device Roger Quadros
2014-06-11  8:56 ` [PATCH 24/36] ARM: OMAP2+: gpmc: add NAND specific setup Roger Quadros
2014-06-11  8:56 ` [PATCH 25/36] ARM: OMAP2+: gpmc: Support multiple Chip Selects per device Roger Quadros
2014-06-11  8:56 ` [PATCH 26/36] ARM: OMAP2+: gpmc-smc91x: Get rid of retime() from omap_smc91x_platform_data Roger Quadros
2014-06-11  8:56 ` [PATCH 27/36] ARM: OMAP2+: usb-tusb6010: Use omap_gpmc_retime() Roger Quadros
2014-06-11  8:56 ` [PATCH 28/36] ARM: OMAP2+: nand: Update gpmc_nand_init() to use generic_gpmc_init() Roger Quadros
2014-06-11  8:56 ` Roger Quadros [this message]
2014-06-11  8:56 ` [PATCH 30/36] ARM: OMAP2+: gpmc-smsc911x: Use gpmc_generic_init() Roger Quadros
2014-06-11  8:56 ` [PATCH 31/36] ARM: OMAP2: usb-tusb6010: " Roger Quadros
2014-06-11  8:56 ` [PATCH 32/36] ARM: OMAP2+: onenand: " Roger Quadros
2014-06-11  8:56 ` [PATCH 33/36] ARM: OMAP2+: board-flash: Use gpmc_generic_init() for NOR Roger Quadros
2014-06-11  8:56 ` [PATCH 34/36] ARM: OMAP2+: gpmc: Make externally unused functions/defines private Roger Quadros
2014-06-11  8:56 ` [PATCH 35/36] ARM: OMAP2+: gpmc: move GPMC driver into drivers/memory Roger Quadros
2014-06-11 11:45   ` [resend][PATCH " Roger Quadros
2014-06-11  8:56 ` [PATCH 36/36] ARM: OMAP2+: defconfig: Enable TI GPMC driver Roger Quadros
2014-06-11 11:52 ` [PATCH 00/36] OMAP: GPMC: Restructure and move OMAP GPMC driver out of mach-omap2 Javier Martinez Canillas
2014-06-11 11:54   ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402477001-31132-30-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=javier@dowhile0.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=pekon@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).