From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761136AbaGPI6A (ORCPT ); Wed, 16 Jul 2014 04:58:00 -0400 Received: from hqemgate14.nvidia.com ([216.228.121.143]:8182 "EHLO hqemgate14.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756531AbaGPIza (ORCPT ); Wed, 16 Jul 2014 04:55:30 -0400 X-PGP-Universal: processed; by hqnvupgp07.nvidia.com on Wed, 16 Jul 2014 01:44:11 -0700 From: Mikko Perttunen To: , , , CC: , , , , Mikko Perttunen Subject: [PATCH v3 1/8] of: Add NVIDIA Tegra SATA controller binding Date: Wed, 16 Jul 2014 11:54:16 +0300 Message-ID: <1405500863-19696-2-git-send-email-mperttunen@nvidia.com> X-Mailer: git-send-email 1.8.1.5 In-Reply-To: <1405500863-19696-1-git-send-email-mperttunen@nvidia.com> References: <1405500863-19696-1-git-send-email-mperttunen@nvidia.com> X-NVConfidentiality: public MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds device tree binding documentation for the SATA controller found on NVIDIA Tegra SoCs. Signed-off-by: Mikko Perttunen --- .../devicetree/bindings/ata/tegra-sata.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt new file mode 100644 index 0000000..946f207 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt @@ -0,0 +1,30 @@ +Tegra124 SoC SATA AHCI controller + +Required properties : +- compatible : "nvidia,tegra124-ahci". +- reg : Should contain 2 entries: + - AHCI register set (SATA BAR5) + - SATA register set +- interrupts : Defines the interrupt used by SATA +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - sata + - sata-oob + - cml1 + - pll_e +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sata + - sata-oob + - sata-cold +- phys : Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. +- phy-names : Must include the following entries: + - sata-phy : XUSB PADCTL SATA PHY +- hvdd-supply : Defines the SATA HVDD regulator +- vddio-supply : Defines the SATA VDDIO regulator +- avdd-supply : Defines the SATA AVDD regulator +- target-5v-supply : Defines the SATA 5V power regulator +- target-12v-supply : Defines the SATA 12V power regulator -- 1.8.1.5