From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754498AbaHYGa5 (ORCPT ); Mon, 25 Aug 2014 02:30:57 -0400 Received: from hqemgate15.nvidia.com ([216.228.121.64]:15420 "EHLO hqemgate15.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754416AbaHYGaz (ORCPT ); Mon, 25 Aug 2014 02:30:55 -0400 X-PGP-Universal: processed; by hqnvupgp07.nvidia.com on Sun, 24 Aug 2014 23:16:48 -0700 From: Wei Ni To: , , , CC: , , , lightning314 Subject: [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008 Date: Mon, 25 Aug 2014 14:29:48 +0800 Message-ID: <1408948188-4181-5-git-send-email-wni@nvidia.com> X-Mailer: git-send-email 1.8.1.5 In-Reply-To: <1408948188-4181-1-git-send-email-wni@nvidia.com> References: <1408948188-4181-1-git-send-email-wni@nvidia.com> X-NVConfidentiality: public MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: lightning314 Add dt node to describe the thermal zone for the nct1008. Signed-off-by: Wei Ni --- arch/arm/boot/dts/tegra114-dalmore.dts | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 5c21d21..94a1b5d 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -779,12 +779,14 @@ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; - temperature-sensor@4c { + nct1008: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; vcc-supply = <&palmas_ldo6_reg>; interrupt-parent = <&gpio>; interrupts = ; + + #thermal-sensor-cells = <1>; }; }; @@ -1283,4 +1285,20 @@ <&tegra_car TEGRA114_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + nct1008-local { + polling-delay-passive = <2000>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + + thermal-sensors = <&nct1008 0>; + }; + + nct1008-remote { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + }; + }; }; -- 1.8.1.5