From: Georgi Djakov <gdjakov@mm-sol.com>
To: galak@codeaurora.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, linux@arm.linux.org.uk,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
iivanov@mm-sol.com, Georgi Djakov <gdjakov@mm-sol.com>
Subject: [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform
Date: Tue, 2 Sep 2014 18:40:43 +0300 [thread overview]
Message-ID: <1409672443-4289-4-git-send-email-gdjakov@mm-sol.com> (raw)
In-Reply-To: <1409672443-4289-1-git-send-email-gdjakov@mm-sol.com>
Enable support for the two SD host controllers on the APQ8084 platform
by adding the required nodes to the DT files.
On the IFC6540 board, the first controller is connected to the onboard
eMMC and the second is connected to a micro-SD card slot.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 11 +++++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index e41cb8a..c9ff108 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -8,5 +8,16 @@
serial@f995e000 {
status = "okay";
};
+
+ sdhci@f9824900 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+ };
+
+ sdhci@f98a4900 {
+ cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 21d01e5..1f130bc 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -3,6 +3,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm APQ 8084";
@@ -203,5 +204,27 @@
clock-names = "core", "iface";
status = "disabled";
};
+
+ sdhci@f9824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-09-02 15:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 15:40 [PATCH v2 0/3] ARM: dts: qcom: Add initial IFC6540 board support Georgi Djakov
2014-09-02 15:40 ` [PATCH v2 1/3] ARM: dts: qcom: Add initial IFC6540 board device tree Georgi Djakov
2014-09-02 15:40 ` [PATCH v2 2/3] ARM: dts: qcom: Enable serial port on IFC6540 boards Georgi Djakov
2014-09-02 15:40 ` Georgi Djakov [this message]
2014-10-08 19:18 ` [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform Nicolas Dechesne
2014-10-08 19:45 ` Josh Cartwright
2014-10-09 6:56 ` Nicolas Dechesne
2014-10-10 17:14 ` Bjorn Andersson
2014-10-14 16:17 ` Georgi Djakov
2014-10-15 7:56 ` Kumar Gala
2014-11-01 15:43 ` Andreas Färber
2014-11-02 8:08 ` Srinivas Kandagatla
2014-09-02 15:54 ` [PATCH v2 0/3] ARM: dts: qcom: Add initial IFC6540 board support Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409672443-4289-4-git-send-email-gdjakov@mm-sol.com \
--to=gdjakov@mm-sol.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=iivanov@mm-sol.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).