From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754172AbaIBRJM (ORCPT ); Tue, 2 Sep 2014 13:09:12 -0400 Received: from mail-we0-f169.google.com ([74.125.82.169]:42748 "EHLO mail-we0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753962AbaIBRJK (ORCPT ); Tue, 2 Sep 2014 13:09:10 -0400 From: Peter Griffin To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, balbi@ti.com, maxime.coquelin@st.com, patrice.chotard@st.com, srinivas.kandagatla@gmail.com, devicetree@vger.kernel.org, lee.jones@linaro.org, linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, peppe.cavallaro@st.com Cc: peter.griffin@linaro.org Subject: [PATCH v5 0/3] Add ST dwc3 glue layer driver Date: Tue, 2 Sep 2014 18:08:46 +0100 Message-Id: <1409677729-6922-1-git-send-email-peter.griffin@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This series adds support for the ST glue logic which wraps the DWC3 controller on STiH407 SoC family chipsets. Changes since v4 - Fix bug with setting bits in usb control register - Remove superflous '\n' - Change default Kconfig to make default same as other platforms - Update dt doc example so that both usb2 and usb3 phys are using generic drivers/phy instead of drivers/usb/phy - Reconfigure ST glue logic regs in resume callback Changes since v3 - Various formating nits Changes since v2 - Use dr_mode for host/device static configuration - Manage shared reset signal to usbss to avoid hang if probing before usb3 phy - Remove DT checks and make driver depend on OF - Change some #define to use BIT macro - Make some comments clearer - Use kerneldoc for struct documentation - Remove udelay - Let DT create platform_devices, and remove legacy alloc - Change some logging levels to dev_dbg - Various whitespace and formatting cleanup - Use SIMPLE_DEV_PM_OPS() - Add const to of_device struct - Reorder header files alphabetically - Use devm_ioremap_resource instead of devm_request_and_ioremap - Remove of_match_ptr() Changes since v1 - Fix Kconfig mistake Peter Griffin (3): usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture Documentation/devicetree/bindings/usb/dwc3-st.txt | 68 ++++ MAINTAINERS | 1 + drivers/usb/dwc3/Kconfig | 9 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-st.c | 377 ++++++++++++++++++++++ 5 files changed, 456 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txt create mode 100644 drivers/usb/dwc3/dwc3-st.c -- 1.9.1