From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756652AbaICPjZ (ORCPT ); Wed, 3 Sep 2014 11:39:25 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:42140 "EHLO mx08-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753700AbaICPjX (ORCPT ); Wed, 3 Sep 2014 11:39:23 -0400 From: Gabriel FERNANDEZ To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Srinivas Kandagatla , Maxime Coquelin , Patrice Chotard , Russell King , Kishon Vijay Abraham I , Grant Likely Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@stlinux.com, Gabriel Fernandez Subject: [PATCH v2 0/8] phy: miphy28lp: Introduce support for MiPHY28lp Date: Wed, 3 Sep 2014 17:37:09 +0200 Message-Id: <1409758637-28654-1-git-send-email-gabriel.fernandez@linaro.org> X-Mailer: git-send-email 1.9.1 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.27,0.0.0000 definitions=2014-09-03_07:2014-09-03,2014-09-03,1970-01-01 signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Changes in v2: from Kishon - create a common file for phy - cosmetic correction in phy-miphy28lp.txt file - change initialization of the registers from Srinivas - rename and simplify a procedure - Add Tx impedance and SSC support for SATA and PCI Hi Kishon, The goal of this series is to add the support of MiPHY28lp Generic PHY. I tried to be as close as possible to the MiPHY365x Lee Jones proposal. Best Regards Gabriel. Gabriel Fernandez (8): phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp phy: miphy28lp: Add MiPHY28lp header file for DT x Driver defines phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY ARM: DT: STi: STiH407: Add DT node for MiPHY28lp ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY phy: miphy28lp: Add SSC support for SATA phy: miphy28lp: Add SSC support for PCIE phy: miphy28lp: Tune tx impedance across Soc cuts .../devicetree/bindings/phy/phy-miphy28lp.txt | 128 +++ arch/arm/boot/dts/stih407-b2120.dts | 11 + arch/arm/boot/dts/stih407.dtsi | 65 ++ arch/arm/configs/multi_v7_defconfig | 1 + drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-miphy28lp.c | 1076 ++++++++++++++++++++ include/dt-bindings/phy/phy-miphy.h | 12 + 8 files changed, 1302 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt create mode 100644 drivers/phy/phy-miphy28lp.c create mode 100644 include/dt-bindings/phy/phy-miphy.h -- 1.9.1