From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754189AbaIOKgg (ORCPT ); Mon, 15 Sep 2014 06:36:36 -0400 Received: from top.free-electrons.com ([176.31.233.9]:36932 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753915AbaIOKgZ (ORCPT ); Mon, 15 Sep 2014 06:36:25 -0400 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com, Peter.Chen@freescale.com, balbi@ti.com, p.zabel@pengutronix.de Cc: Antoine Tenart , alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 05/12] phy: add the Berlin USB PHY driver Date: Mon, 15 Sep 2014 12:36:11 +0200 Message-Id: <1410777378-12726-6-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1410777378-12726-1-git-send-email-antoine.tenart@free-electrons.com> References: <1410777378-12726-1-git-send-email-antoine.tenart@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the driver driving the Marvell Berlin USB PHY. This allows to initialize the PHY and to use it from the USB driver later. Signed-off-by: Antoine Tenart --- drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-berlin-usb.c | 224 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 232 insertions(+) create mode 100644 drivers/phy/phy-berlin-usb.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 0dd742719154..d1d73dd8c1fb 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,13 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_BERLIN_USB + tristate "Marvell Berlin USB PHY Driver" + depends on ARCH_BERLIN && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the USB PHY on Marvell Berlin SoCs. + config PHY_BERLIN_SATA tristate "Marvell Berlin SATA PHY driver" depends on ARCH_BERLIN && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 95c69ed5ed45..b12e84b69c23 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c new file mode 100644 index 000000000000..f9f13067f50f --- /dev/null +++ b/drivers/phy/phy-berlin-usb.c @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Tenart + * Jisheng Zhang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_PHY_PLL 0x04 +#define USB_PHY_PLL_CONTROL 0x08 +#define USB_PHY_TX_CTRL0 0x10 +#define USB_PHY_TX_CTRL1 0x14 +#define USB_PHY_TX_CTRL2 0x18 +#define USB_PHY_RX_CTRL 0x20 +#define USB_PHY_ANALOG 0x34 + +/* USB_PHY_PLL */ +#define CLK_REF_DIV(x) ((x) << 4) +#define FEEDBACK_CLK_DIV(x) ((x) << 8) + +/* USB_PHY_PLL_CONTROL */ +#define CLK_STABLE BIT(0) +#define PLL_CTRL_PIN BIT(1) +#define PLL_CTRL_REG BIT(2) +#define PLL_ON BIT(3) +#define PHASE_OFF_TOL_125 (0x0 << 5) +#define PHASE_OFF_TOL_250 BIT(5) +#define KVC0_CALIB (0x0 << 9) +#define KVC0_REG_CTRL BIT(9) +#define KVC0_HIGH (0x0 << 10) +#define KVC0_LOW (0x3 << 10) +#define CLK_BLK_EN BIT(13) + +/* USB_PHY_TX_CTRL0 */ +#define EXT_HS_RCAL_EN BIT(3) +#define EXT_FS_RCAL_EN BIT(4) +#define IMPCAL_VTH_DIV(x) ((x) << 5) +#define EXT_RS_RCAL_DIV(x) ((x) << 8) +#define EXT_FS_RCAL_DIV(x) ((x) << 12) + +/* USB_PHY_TX_CTRL1 */ +#define TX_VDD15_14 (0x0 << 4) +#define TX_VDD15_15 BIT(4) +#define TX_VDD15_16 (0x2 << 4) +#define TX_VDD15_17 (0x3 << 4) +#define TX_VDD12_VDD (0x0 << 6) +#define TX_VDD12_11 BIT(6) +#define TX_VDD12_12 (0x2 << 6) +#define TX_VDD12_13 (0x3 << 6) +#define LOW_VDD_EN BIT(8) +#define TX_OUT_AMP(x) ((x) << 9) + +/* USB_PHY_TX_CTRL2 */ +#define TX_CHAN_CTRL_REG(x) ((x) << 0) +#define DRV_SLEWRATE(x) ((x) << 4) +#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6) +#define IMP_CAL_FS_HS_DLY_1 BIT(6) +#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6) +#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6) +#define FS_DRV_EN_MASK(x) ((x) << 8) +#define HS_DRV_EN_MASK(x) ((x) << 12) + +/* USB_PHY_RX_CTRL */ +#define PHASE_FREEZE_DLY_2_CL (0x0 << 0) +#define PHASE_FREEZE_DLY_4_CL BIT(0) +#define ACK_LENGTH_8_CL (0x0 << 2) +#define ACK_LENGTH_12_CL BIT(2) +#define ACK_LENGTH_16_CL (0x2 << 2) +#define ACK_LENGTH_20_CL (0x3 << 2) +#define SQ_LENGTH_3 (0x0 << 4) +#define SQ_LENGTH_6 BIT(4) +#define SQ_LENGTH_9 (0x2 << 4) +#define SQ_LENGTH_12 (0x3 << 4) +#define DISCON_THRESHOLD_260 (0x0 << 6) +#define DISCON_THRESHOLD_270 BIT(6) +#define DISCON_THRESHOLD_280 (0x2 << 6) +#define DISCON_THRESHOLD_290 (0x3 << 6) +#define SQ_THRESHOLD(x) ((x) << 8) +#define LPF_COEF(x) ((x) << 12) +#define INTPL_CUR_10 (0x0 << 14) +#define INTPL_CUR_20 BIT(14) +#define INTPL_CUR_30 (0x2 << 14) +#define INTPL_CUR_40 (0x3 << 14) + +/* USB_PHY_ANALOG */ +#define ANA_PWR_UP BIT(1) +#define ANA_PWR_DOWN BIT(2) +#define V2I_VCO_RATIO(x) ((x) << 7) +#define R_ROTATE_90 (0x0 << 10) +#define R_ROTATE_0 BIT(10) +#define MODE_TEST_EN BIT(11) +#define ANA_TEST_DC_CTRL(x) ((x) << 12) + +#define to_phy_berlin_usb_priv(p) \ + container_of((p), struct phy_berlin_usb_priv, phy) + +static const u32 phy_berlin_pll_dividers[] = { + /* Berlin 2 */ + CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), + /* Berlin 2CD */ + CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55), +}; + +struct phy_berlin_usb_priv { + void __iomem *base; + struct phy *phy; + struct reset_control *rst_ctrl; + u32 pll_divider; +}; + +static int phy_berlin_usb_power_on(struct phy *phy) +{ + struct phy_berlin_usb_priv *priv = dev_get_drvdata(phy->dev.parent); + + reset_control_reset(priv->rst_ctrl); + + writel(priv->pll_divider, + priv->base + USB_PHY_PLL); + writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL | + CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL); + writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5), + priv->base + USB_PHY_ANALOG); + writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 | + DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) | + INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL); + + writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1); + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4), + priv->base + USB_PHY_TX_CTRL0); + + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) | + EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0); + + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4), + priv->base + USB_PHY_TX_CTRL0); + writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 | + FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2); + + return 0; +} + +static struct phy_ops phy_berlin_usb_ops = { + .power_on = phy_berlin_usb_power_on, + .owner = THIS_MODULE, +}; + +static const struct of_device_id phy_berlin_sata_of_match[] = { + { + .compatible = "marvell,berlin2-usb-phy", + .data = &phy_berlin_pll_dividers[0], + }, + { + .compatible = "marvell,berlin2cd-usb-phy", + .data = &phy_berlin_pll_dividers[1], + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match); + +static int phy_berlin_usb_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(phy_berlin_sata_of_match, &pdev->dev); + struct phy_berlin_usb_priv *priv; + struct resource *res; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(priv->rst_ctrl)) + return PTR_ERR(priv->rst_ctrl); + + priv->pll_divider = *((u32 *)match->data); + + priv->phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops, + NULL); + if (IS_ERR(priv->phy)) { + dev_err(&pdev->dev, "failed to create PHY\n"); + return PTR_ERR(priv->phy); + } + + platform_set_drvdata(pdev, priv); + + phy_provider = + devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static struct platform_driver phy_berlin_usb_driver = { + .probe = phy_berlin_usb_probe, + .driver = { + .name = "phy-berlin-usb", + .owner = THIS_MODULE, + .of_match_table = phy_berlin_sata_of_match, + }, +}; +module_platform_driver(phy_berlin_usb_driver); + +MODULE_AUTHOR("Antoine Tenart "); +MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB"); +MODULE_LICENSE("GPL"); -- 1.9.1