From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753344AbaIOOoV (ORCPT ); Mon, 15 Sep 2014 10:44:21 -0400 Received: from ns.mm-sol.com ([37.157.136.199]:45761 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752749AbaIOOoS (ORCPT ); Mon, 15 Sep 2014 10:44:18 -0400 From: "Ivan T. Ivanov" To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala Cc: Bjorn Andersson , David Collins , Wu Fenglin , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Ivan T. Ivanov" Subject: [PATCH v4 1/4] pinctrl: Device tree bindings for Qualcomm PMIC GPIO block Date: Mon, 15 Sep 2014 17:44:11 +0300 Message-Id: <1410792254-24126-2-git-send-email-iivanov@mm-sol.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1410792254-24126-1-git-send-email-iivanov@mm-sol.com> References: <1410792254-24126-1-git-send-email-iivanov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Bjorn Andersson This introduced the device tree bindings for the GPIO block found in PMIC's from Qualcomm. Signed-off-by: Bjorn Andersson Signed-off-by: Ivan T. Ivanov --- .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 214 +++++++++++++++++++++ include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 142 ++++++++++++++ 2 files changed, 356 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt create mode 100644 include/dt-bindings/pinctrl/qcom,pmic-gpio.h diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt new file mode 100644 index 0000000..e146496 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -0,0 +1,214 @@ +Qualcomm PMIC GPIO block + +This binding describes the GPIO block(s) found in the 8xxx series of +PMIC's from Qualcomm. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,pm8018-gpio" + "qcom,pm8038-gpio" + "qcom,pm8058-gpio" + "qcom,pm8917-gpio" + "qcom,pm8921-gpio" + "qcom,spmi-pmic-gpio" + +- reg: + Usage: required + Value type: + Definition: Register base of the GPIO block and length. + +- interrupts: + Usage: required + Value type: + Definition: Must contain an array of encoded interrupt specifiers for + each available GPIO + +- gpio-controller: + Usage: required + Value type: + Definition: Mark the device node as a GPIO controller + +- #gpio-cells: + Usage: required + Value type: + Definition: Must be 2; + the first cell will be used to define gpio number and the + second denotes the flags for this gpio + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin or a list of pins. This configuration can include the +mux function to select on those pin(s), and various pin configuration +parameters, as listed below. + + +SUBNODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio1-gpio6 for pm8018 + gpio1-gpio12 for pm8038 + gpio1-gpio40 for pm8058 + gpio1-gpio38 for pm8917 + gpio1-gpio44 for pm8921 + gpio1-gpio36 for pm8941 + gpio1-gpio22 for pma8084 + +- function: + Usage: required + Value type: + Definition: Specify the alternative function to be configured for the + specified pins. Valid values are: + "normal", + "paired", + "func1", + "func2", + "dtest1", + "dtest2", + "dtest3", + "dtest4" + +- bias-disable: + Usage: optional + Value type: + Definition: The specified pins should be configured as no pull. + +- bias-pull-down: + Usage: optional + Value type: + Definition: The specified pins should be configured as pull down. + +- bias-pull-up: + Usage: optional + Value type: + Definition: The specified pins should be configured as pull up. + +- qcom,pull-up-strength: + Usage: optional + Value type: + Definition: Specifies the strength to use for pull up, if selected. + Valid values are; as defined in + : + 1: 30uA (PMIC_GPIO_PULL_UP_30) + 2: 1.5uA (PMIC_GPIO_PULL_UP_1P5) + 3: 31.5uA (PMIC_GPIO_PULL_UP_31P5) + 4: 1.5uA + 30uA boost (PMIC_GPIO_PULL_UP_1P5_30) + If this property is ommited 30uA strength will be used if + pull up is selected + +- bias-high-impedance: + Usage: optional + Value type: + Definition: The specified pins will put in high-Z mode and disabled. + +- input-enable: + Usage: optional + Value type: + Definition: The specified pins are put in input mode. + +- output-high: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + high. + +- output-low: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + low. + +- power-source: + Usage: optional + Value type: + Definition: Selects the power source for the specified pins. Valid + power sources are defined per chip in + + +- qcom,drive-strength: + Usage: optional + Value type: + Definition: Selects the drive strength for the specified pins. Value + drive strengths are: + 0: no (PMIC_GPIO_STRENGTH_NO) + 1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V + 2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V + 3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V + as defined in + +- drive-push-pull: + Usage: optional + Value type: + Definition: The specified pins are configured in push-pull mode. + +- drive-open-drain: + Usage: optional + Value type: + Definition: The specified pins are configured in open-drain mode. + +- drive-open-source: + Usage: optional + Value type: + Definition: The specified pins are configured in open-source mode. + +Example: + + pm8921_gpio: gpio@150 { + compatible = "qcom,pm8921-gpio"; + reg = <0x150 0x160>; + interrupts = <192 1>, <193 1>, <194 1>, + <195 1>, <196 1>, <197 1>, + <198 1>, <199 1>, <200 1>, + <201 1>, <202 1>, <203 1>, + <204 1>, <205 1>, <206 1>, + <207 1>, <208 1>, <209 1>, + <210 1>, <211 1>, <212 1>, + <213 1>, <214 1>, <215 1>, + <216 1>, <217 1>, <218 1>, + <219 1>, <220 1>, <221 1>, + <222 1>, <223 1>, <224 1>, + <225 1>, <226 1>, <227 1>, + <228 1>, <229 1>, <230 1>, + <231 1>, <232 1>, <233 1>, + <234 1>, <235 1>; + + gpio-controller; + #gpio-cells = <2>; + + pm8921_gpio_keys: gpio-keys { + volume-keys { + pins = "gpio20", "gpio21"; + function = "normal"; + + input-enable; + bias-pull-up; + drive-push-pull; + qcom,drive-strength = ; + power-source = ; + }; + }; + }; diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h new file mode 100644 index 0000000..fa74d7c --- /dev/null +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -0,0 +1,142 @@ +/* + * This header provides constants for the Qualcomm PMIC GPIO binding. + */ + +#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H +#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H + +#define PMIC_GPIO_PULL_UP_30 0 +#define PMIC_GPIO_PULL_UP_1P5 1 +#define PMIC_GPIO_PULL_UP_31P5 2 +#define PMIC_GPIO_PULL_UP_1P5_30 3 + +#define PMIC_GPIO_STRENGTH_NO 0 +#define PMIC_GPIO_STRENGTH_HIGH 1 +#define PMIC_GPIO_STRENGTH_MED 2 +#define PMIC_GPIO_STRENGTH_LOW 3 + +/* + * Note: PM8018 GPIO3 and GPIO4 are supporting + * only S3 and L2 options (1.8V) + */ +#define PM8018_GPIO_L6 0 +#define PM8018_GPIO_L5 1 +#define PM8018_GPIO_S3 2 +#define PM8018_GPIO_L14 3 +#define PM8018_GPIO_L2 4 +#define PM8018_GPIO_L4 5 +#define PM8018_GPIO_VDD 6 + +/* + * Note: PM8038 GPIO7 and GPIO8 are supporting + * only L11 and L4 options (1.8V) + */ +#define PM8038_GPIO_VPH 0 +#define PM8038_GPIO_BB 1 +#define PM8038_GPIO_L11 2 +#define PM8038_GPIO_L15 3 +#define PM8038_GPIO_L4 4 +#define PM8038_GPIO_L3 5 +#define PM8038_GPIO_L17 6 + +#define PM8058_GPIO_VPH 0 +#define PM8058_GPIO_BB 1 +#define PM8058_GPIO_S3 2 +#define PM8058_GPIO_L3 3 +#define PM8058_GPIO_L7 4 +#define PM8058_GPIO_L6 5 +#define PM8058_GPIO_L5 6 +#define PM8058_GPIO_L2 7 + +#define PM8917_GPIO_VPH 0 +#define PM8917_GPIO_S4 2 +#define PM8917_GPIO_L15 3 +#define PM8917_GPIO_L4 4 +#define PM8917_GPIO_L3 5 +#define PM8917_GPIO_L17 6 + +#define PM8921_GPIO_VPH 0 +#define PM8921_GPIO_BB 1 +#define PM8921_GPIO_S4 2 +#define PM8921_GPIO_L15 3 +#define PM8921_GPIO_L4 4 +#define PM8921_GPIO_L3 5 +#define PM8921_GPIO_L17 6 + +/* + * Note: PM8941 gpios from 15 to 18 are supporting + * only S3 and L6 options (1.8V) + */ +#define PM8941_GPIO_VPH 0 +#define PM8941_GPIO_L1 1 +#define PM8941_GPIO_S3 2 +#define PM8941_GPIO_L6 3 + +/* + * Note: PMA8084 gpios from 15 to 18 are supporting + * only S4 and L6 options (1.8V) + */ +#define PMA8084_GPIO_VPH 0 +#define PMA8084_GPIO_L1 1 +#define PMA8084_GPIO_S4 2 +#define PMA8084_GPIO_L6 3 + +/* To be used with "function" */ +#define PMIC_GPIO_FUNC_NORMAL "normal" +#define PMIC_GPIO_FUNC_PAIRED "paired" +#define PMIC_GPIO_FUNC_FUNC1 "func1" +#define PMIC_GPIO_FUNC_FUNC2 "func2" +#define PMIC_GPIO_FUNC_DTEST1 "dtest1" +#define PMIC_GPIO_FUNC_DTEST2 "dtest2" +#define PMIC_GPIO_FUNC_DTEST3 "dtest3" +#define PMIC_GPIO_FUNC_DTEST4 "dtest4" + +#define PM8038_GPIO1_2_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO3_5V_BOOST_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO4_SSBI_ALT_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO5_6_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO10_11_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO6_7_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO9_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO6_12_KYPD_DRV PMIC_GPIO_FUNC_FUNC2 + +#define PM8058_GPIO7_8_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO7_8_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO9_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO24_26_LPG_DRV PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO33_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO34_35_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO36_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO37_UPL_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO37_UART_M_RX PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO38_39_CLK_32KHZ PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO39_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO40_EXT_BB_EN PMIC_GPIO_FUNC_FUNC1 + +#define PM8917_GPIO9_18_KEYP_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO20_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2 +#define PM8917_GPIO25_26_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO37_38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO37_38_MP3_CLK PMIC_GPIO_FUNC_FUNC2 + +#define PM8941_GPIO9_14_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PM8941_GPIO23_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO23_26_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2 +#define PM8941_GPIO31_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO33_36_LPG_DRV_3D PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO33_36_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2 + +#define PMA8084_GPIO4_5_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO7_10_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO5_14_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO19_21_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO22_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 + +#endif -- 1.9.1