From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759945AbaIOXD2 (ORCPT ); Mon, 15 Sep 2014 19:03:28 -0400 Received: from youngberry.canonical.com ([91.189.89.112]:50776 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756327AbaIOWNr (ORCPT ); Mon, 15 Sep 2014 18:13:47 -0400 From: Kamal Mostafa To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Arnd Bergmann , linux-crypto@vger.kernel.org, Fabio Baltieri , Linus Walleij , Herbert Xu , "David S. Miller" , Kamal Mostafa Subject: [PATCH 3.13 056/187] crypto: ux500 - make interrupt mode plausible Date: Mon, 15 Sep 2014 15:07:46 -0700 Message-Id: <1410818997-9432-57-git-send-email-kamal@canonical.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1410818997-9432-1-git-send-email-kamal@canonical.com> References: <1410818997-9432-1-git-send-email-kamal@canonical.com> X-Extended-Stable: 3.13 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.13.11.7 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Arnd Bergmann commit e1f8859ee265fc89bd21b4dca79e8e983a044892 upstream. The interrupt handler in the ux500 crypto driver has an obviously incorrect way to access the data buffer, which for a while has caused this build warning: ../ux500/cryp/cryp_core.c: In function 'cryp_interrupt_handler': ../ux500/cryp/cryp_core.c:234:5: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel_relaxed(ctx->indata, ^ In file included from ../include/linux/swab.h:4:0, from ../include/uapi/linux/byteorder/big_endian.h:12, from ../include/linux/byteorder/big_endian.h:4, from ../arch/arm/include/uapi/asm/byteorder.h:19, from ../include/asm-generic/bitops/le.h:5, from ../arch/arm/include/asm/bitops.h:340, from ../include/linux/bitops.h:33, from ../include/linux/kernel.h:10, from ../include/linux/clk.h:16, from ../drivers/crypto/ux500/cryp/cryp_core.c:12: ../include/uapi/linux/swab.h:57:119: note: expected '__u32' but argument is of type 'const u8 *' static inline __attribute_const__ __u32 __fswab32(__u32 val) There are at least two, possibly three problems here: a) when writing into the FIFO, we copy the pointer rather than the actual data we want to give to the hardware b) the data pointer is an array of 8-bit values, while the FIFO is 32-bit wide, so both the read and write access fail to do a proper type conversion c) This seems incorrect for big-endian kernels, on which we need to byte-swap any register access, but not normally FIFO accesses, at least the DMA case doesn't do it either. This converts the bogus loop to use the same readsl/writesl pair that we use for the two other modes (DMA and polling). This is more efficient and consistent, and probably correct for endianess. The bug has existed since the driver was first merged, and was probably never detected because nobody tried to use interrupt mode. It might make sense to backport this fix to stable kernels, depending on how the crypto maintainers feel about that. Signed-off-by: Arnd Bergmann Cc: linux-crypto@vger.kernel.org Cc: Fabio Baltieri Cc: Linus Walleij Cc: Herbert Xu Cc: "David S. Miller" Signed-off-by: Herbert Xu Signed-off-by: Kamal Mostafa --- drivers/crypto/ux500/cryp/cryp_core.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index a999f53..92105f3 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -190,7 +190,7 @@ static void add_session_id(struct cryp_ctx *ctx) static irqreturn_t cryp_interrupt_handler(int irq, void *param) { struct cryp_ctx *ctx; - int i; + int count; struct cryp_device_data *device_data; if (param == NULL) { @@ -215,12 +215,11 @@ static irqreturn_t cryp_interrupt_handler(int irq, void *param) if (cryp_pending_irq_src(device_data, CRYP_IRQ_SRC_OUTPUT_FIFO)) { if (ctx->outlen / ctx->blocksize > 0) { - for (i = 0; i < ctx->blocksize / 4; i++) { - *(ctx->outdata) = readl_relaxed( - &device_data->base->dout); - ctx->outdata += 4; - ctx->outlen -= 4; - } + count = ctx->blocksize / 4; + + readsl(&device_data->base->dout, ctx->outdata, count); + ctx->outdata += count; + ctx->outlen -= count; if (ctx->outlen == 0) { cryp_disable_irq_src(device_data, @@ -230,12 +229,12 @@ static irqreturn_t cryp_interrupt_handler(int irq, void *param) } else if (cryp_pending_irq_src(device_data, CRYP_IRQ_SRC_INPUT_FIFO)) { if (ctx->datalen / ctx->blocksize > 0) { - for (i = 0 ; i < ctx->blocksize / 4; i++) { - writel_relaxed(ctx->indata, - &device_data->base->din); - ctx->indata += 4; - ctx->datalen -= 4; - } + count = ctx->blocksize / 4; + + writesl(&device_data->base->din, ctx->indata, count); + + ctx->indata += count; + ctx->datalen -= count; if (ctx->datalen == 0) cryp_disable_irq_src(device_data, -- 1.9.1