From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755314AbaIQLux (ORCPT ); Wed, 17 Sep 2014 07:50:53 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:40150 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754313AbaIQLuu (ORCPT ); Wed, 17 Sep 2014 07:50:50 -0400 From: Javier Martinez Canillas To: Kukjin Kim Cc: Doug Anderson , Chanwoo Choi , Daniel Drake , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH 2/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow Date: Wed, 17 Sep 2014 13:50:33 +0200 Message-Id: <1410954633-27025-3-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1410954633-27025-1-git-send-email-javier.martinez@collabora.co.uk> References: <1410954633-27025-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property for the Samsung's S3C Real Time Clock controller that specifies the 32.768 kHz clock that uses the RTC as its source clock. In the case of the Exynos5250 based Snow board, the Maxim 77686 32kHz AP clock is used as the source clock. Signed-off-by: Javier Martinez Canillas --- arch/arm/boot/dts/exynos5250-snow.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef..56eec56 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -10,6 +10,7 @@ /dts-v1/; #include +#include #include "exynos5250.dtsi" / { @@ -29,6 +30,8 @@ rtc@101E0000 { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; pinctrl@11400000 { @@ -350,7 +353,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686@09 { + max77686: max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 0>; -- 2.1.0