From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751349AbaJIWoo (ORCPT ); Thu, 9 Oct 2014 18:44:44 -0400 Received: from mail-gw1-out.broadcom.com ([216.31.210.62]:3267 "EHLO mail-gw1-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750903AbaJIWom (ORCPT ); Thu, 9 Oct 2014 18:44:42 -0400 X-IronPort-AV: E=Sophos;i="5.04,688,1406617200"; d="scan'208";a="48093624" From: Scott Branden To: Christian Daudt , Matt Porter , Russell King , , Mike Turquette , Alex Elder , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , "Kumar Gala" , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , Joe Perches , "Mauro Carvalho Chehab" , Antti Palosaari CC: JD Zheng , Ray Jui , , , , Scott Branden Subject: [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Date: Thu, 9 Oct 2014 15:44:24 -0700 Message-ID: <1412894671-5921-1-git-send-email-sbranden@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patchset contains initial support for Broadcom's Cygnus SoC based on our iProc architecture. Initial support is minimal and includes just the mach platform code, clock driver, and a basic device tree configuration. Peripheral drivers will be submitted soon, as will device tree configurations for other Cygnus board variants. Changes from v3: - restart functionality removed. Will be added in a different patchset in drivers/power - removed NEON init sequence. Will be moved to bootloader - cleaned up Kconfigs for ARCH_BCM_CYGNUS by removing unnecessary selects - consolidated ARCH_BCM_IPROC with select from ARCH_BCM_CYGNUS and ARCH_BCM5301X - removed bcm911360_entphn binding - added documentation for SoCs currently supported in Cygnus family Changes from v2: - rebased to 3.17 kernel Changes from v1: - Address code review comments as per previous responses. - Copyright headers updated to remove Broadcom URL. - mach platform code still contains hard coded addresses. These address are the same for all Cygnus variants. Could you please provide guidance on where they should go if you would still like them changed. There does not seem to be a reason to change them to device tree as they do not change. Jonathan Richardson (5): ARM: cygnus: Initial support for Broadcom Cygnus SoC clk: Clock driver support for Broadcom Cygnus SoC dt-bindings: Document Broadcom Cygnus SoC and clock driver ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC ARM: dts: Enable Broadcom Cygnus SoC Scott Branden (2): MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config .../devicetree/bindings/arm/bcm/cygnus.txt | 31 + .../devicetree/bindings/clock/clk-cygnus.txt | 121 ++ .../devicetree/bindings/clock/clk-iproc.txt | 48 + MAINTAINERS | 17 +- arch/arm/Kconfig.debug | 2 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-cygnus.dtsi | 349 ++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 22 + arch/arm/configs/bcm_cygnus_defconfig | 221 ++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-bcm/Kconfig | 68 +- arch/arm/mach-bcm/Makefile | 3 + arch/arm/mach-bcm/bcm_cygnus.c | 26 + drivers/clk/Makefile | 1 + drivers/clk/bcm/Makefile | 2 + drivers/clk/bcm/clk-cygnus.c | 1186 ++++++++++++++++++++ drivers/clk/bcm/clk-iproc.c | 451 ++++++++ 17 files changed, 2527 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt create mode 100644 Documentation/devicetree/bindings/clock/clk-cygnus.txt create mode 100644 Documentation/devicetree/bindings/clock/clk-iproc.txt create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts create mode 100644 arch/arm/configs/bcm_cygnus_defconfig create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c create mode 100644 drivers/clk/bcm/clk-cygnus.c create mode 100644 drivers/clk/bcm/clk-iproc.c -- 1.7.9.5